Registrovat

Product Finder

Nastavení

Useful links

 
[["US","AU","GB","DE"]]
Registrovat
Shipped From:
  • Global

HobbyKing™ HK-732MG Coreless Digital MG/BB Servo 3.5kg / 0.07sec / 28g

HobbyKing™ HK-732MG Coreless Digital MG/BB Servo 3.5kg / 0.07sec / 28g

Now save Uložit 0,00 € 0,00 €

15,39 €
Není skladem!
Stock:
OUT OF STOCK
Váha:
35 g
SKU:
9458000002-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Popis
produktu

HK-732MG Coreless Digital MG/BB Servo 28g / 3.5kg / 0.07s

Specifications:
Model: HK-732MG
Operating Voltage: 4.5V / 6.0V
Operating Speed: 0.09sec.60º/ 0.07sec.60º
Stall Torque: 3kg.cm / 3.5kg.cm
Size: 35x15x29.2mm
Weight: 28g
Dead Band: ≤4uSec
Motor Type: Coreless
Gear: Metal
Spline Count: 25T
Connector wire: 210mm
Operating Temperature Range: -20°C to +60°C

Product
Specifications

Další informace

  • SKU:
    9458000002-0
  • Brand:
    HobbyKing
  • Hmotnost ( g )
    35.00
  • Délka
    85.00
  • Width:
    24.00
  • Výška:
    80.00
  • Rychlost ( Sec / 60deg )
    Ne
  • Točivý moment ( kg) (min . 0,01 kg )
    Ne
  • Unit Weight (g):
    nedefinováno
  • A ( mm ):
    Ne
  • B ( mm )
    Ne
  • C ( mm )
    Ne
  • D ( mm ):
    Ne
  • E ( mm ):
    Ne
  • F ( mm )
    Ne
Community
Discussions
Rate&
Review

Napište vlastní recenzi

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
This servo is fine for 450 PRO tail. It isfast enough, very little slope and centers well. It has metal housing in the middle where motor is mounted, so cooling is better. It is very similar to this good plastic gear servo: HK15158A Digital BB/Coreless Mini Servo 25g / 2.8kg / 0.07s , only with metal gear and metal-alu middle housing... Bye
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I'm using 3 of these now on a 450L Pro, GT450L and a 500DFC Pro. All work very well and run cool, even after a hard 3d flight. All 3 are using a VBar. In my opinion it's a better servo than the Align DS520.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
All Servocases are broken without any damage!

<a href='http://www.hobbyking.com/hobbycity/store/uploads/635996748X482067X7.JPG' target=_blank>HK752brocken</a>
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I'm using this on the tail of my HK500, running directly off a 2s LiFe RX pack, and using a FuBar FBL controller. It give me a rock solid tail, and stays cool. It's a perfect fit in the 500, and the case seems durable. It's survived a few crashes, along with the HK752 cyclic servos unharmed. Definitely a great servo for the money AFAIC.

I struggled to get rid of binding in the HK500 tail, and any binding will cause the tail servo to heat up. You need to check for binding with the servo disconnected and the heli spooled up without the main blades, moving the tail linkage by hand.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
servo bekerja dengan baik untuk servo rudder heli hk 500 saya. yang mennggukan gyro kds..dan harga sangat terjangkau
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
this servo is very, very and very very hot! at point that you cannot put you finger on it after 2 min of flight!!! I already tryed it on hk 500GT with ALIGN 3G, 3GX and ZYX FBL TAROT, all they have the same heat... it still not burned, but I think better get out it from my helis. Where have hot maybe can have FIRE!... faraway from me!!! heheheh
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
recieved few days ago.centring is good.speed is good.im using it on my hk500 heli tail with spartan gyro.tail is rock solid,sport flying and mild 3d.servo is getting very hot after 3min,but still holding the tail,i have done 5 flights till now,lets see if it holds for long time
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Štítky produktu

Štítky oddělujte mezerou. Víceslovné uzavřete v apostrofech (').