New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

HobbyKing™ HK-933MG Digital MG Servo 2.0kg / 0.10sec / 12g

HobbyKing™ HK-933MG Digital MG Servo 2.0kg / 0.10sec / 12g

Shipped From:
  • USA
  • Global
QTY:

Now save Uložit 0,00 € 0,00 €

7,00 €
Stav:
Skladem
SKU:
HK-D933MG
WANT FREE SHIPPING? Click here to find out more!
Specially designed for helicopter and fast response applications. It's high quality motor allows longer run time on high speed. Compatible with many gyros such as Futaba 401,601. 
 

Model: HK-933MG
Operating Voltage: 4.5V / 6.0V
Operating Current: 50mA / 150mA
Idle Current: 5mA
Locked Rotor Current: 600mA
Operating Speed: 0.12sec.60º/ 0.10sec.60º
Stall Torque: 1.8kg.cm / 2.0kg.cm
Size: 22.5x11.5x24.6mm
Weight: 12g
Dead Band: ≤4uSec
Gear: Metal
Gear Type: Digital
Motor: Brushed
Spline Count: 20T
Connector wire: 210mm
Operating Temperature Range: -20°C to +60°C

  • SKU HK-D933MG
  • Brand HobbyKing
  • Hmotnost 35.0000
  • Délka 62.00
  • Width 30.00
  • Výška 45.00
  • Točivý moment ( kg) (min . 0,01 kg ) 2.00
  • Rychlost ( Sec / 60deg ) 0.10
  • A ( mm ) 32.00
  • B ( mm ) 23.00
  • C ( mm ) 30.00
  • D ( mm ) 12.00
  • E ( mm ) 33.00
  • F ( mm ) 20.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Have bought these before for my 450 size helis for cyclic and are doing fine, plastic is a little fragile in case of crash, but gears are good and almoust no slope. For the price one of best servo for 450 size helis. It is also fast and strong enough for FBL.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Have bought these before for my 450 size helis for cyclic and are doing fine, plastic is a little fragile in case of crash, but gears are good and almoust no slope. For the price one of best servo for 450 size helis. It is also fast and strong enough for FBL.

this servo's casing seems to be stronger then the last time i bought this. Use this on my 450heli as cyclic with ikon flybarless unit set at 200hz. Holds and centre's well

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

this servo's casing seems to be stronger then the last time i bought this. Use this on my 450heli as cyclic with ikon flybarless unit set at 200hz. Holds and centre's well

Ich verwende diese Servos in einem 450er Heli. Sie sind fr meinen ruhigen Flugstil vllig ausreichend. Nach 70 Flgen stieg eines der Servos aus, zum Glck nicht whrend des Fluges. Aufgrund eines der vielen ntzlichen Beitrgen hier im Netz kontrollierte ich die Kabelanschlsse und tatschlich war eines der Kabel abgebrochen. Nicht die Ltstellen waren schlecht sondern direkt neben der Ltstelle war ein Kabel abgebrochen, weil sich die Kabel innerhalb des Gehuses bewegen knnen! Ich trennte die anderen Kabel ab und ltete alle drei neu an. Nun funktioniert das Servo wieder. Ich habe jetzt die Kabeldurchfhrungen aussen am Gehuse zustzlich mit einem Pfropfen aus Schaumstoffkleber fixiert. Schaumstoff-Kleber darum weil er elastisch bleibt und auf jedem Material gut klebt. Eigentlich schade, dass die Zuverlssigkeit dieses sonst guten Servos durch einen so blden Konstruktionsfehler beeintrchtigt wird! Ich werde in Zukunft diese Stelle bei jedem neuen Servo kontrollieren und bei Bedarf durch einen Pfropfen aus Schaumstoff-Kleber zustzlich fixieren!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ich verwende diese Servos in einem 450er Heli. Sie sind fr meinen ruhigen Flugstil vllig ausreichend. Nach 70 Flgen stieg eines der Servos aus, zum Glck nicht whrend des Fluges. Aufgrund eines der vielen ntzlichen Beitrgen hier im Netz kontrollierte ich die Kabelanschlsse und tatschlich war eines der Kabel abgebrochen. Nicht die Ltstellen waren schlecht sondern direkt neben der Ltstelle war ein Kabel abgebrochen, weil sich die Kabel innerhalb des Gehuses bewegen knnen! Ich trennte die anderen Kabel ab und ltete alle drei neu an. Nun funktioniert das Servo wieder. Ich habe jetzt die Kabeldurchfhrungen aussen am Gehuse zustzlich mit einem Pfropfen aus Schaumstoffkleber fixiert. Schaumstoff-Kleber darum weil er elastisch bleibt und auf jedem Material gut klebt. Eigentlich schade, dass die Zuverlssigkeit dieses sonst guten Servos durch einen so blden Konstruktionsfehler beeintrchtigt wird! Ich werde in Zukunft diese Stelle bei jedem neuen Servo kontrollieren und bei Bedarf durch einen Pfropfen aus Schaumstoff-Kleber zustzlich fixieren!

seem ok on inspection, still have to do my tests

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

seem ok on inspection, still have to do my tests

Great little servo. Slightly too big for an HK250GT as it sticks out more than the canopy mount

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great little servo. Slightly too big for an HK250GT as it sticks out more than the canopy mount

Used on both my 250 and 450 cyclic. Recommended.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Used on both my 250 and 450 cyclic. Recommended.

Great cyclics for 450. Works very well - cannot beat price.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great cyclics for 450. Works very well - cannot beat price.

impecable marche du feu de dieu

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

impecable marche du feu de dieu

Nice servos for 450 flybar helis, maybe good enough for FBL when flying in the trainer version without a heavy weigth scale fuselage. They work very smooth after adding a little amount of grease to the gears and 30 minutes on the servo tester in automatic mode for a break-in with a 4-cell Ni-MH battery. They run smooth as silk after this procedure and gave my old Belt CP new life due to far more precise cyclic and collective response. Just had to modify the chassis a little to make them fit. They work well with the 5,5 volt SBEC in the YEP 30 A ESC, not glitches after 2 months of flying and fun with my old crate. So cheap and so good, that was a nice surprise for me.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice servos for 450 flybar helis, maybe good enough for FBL when flying in the trainer version without a heavy weigth scale fuselage. They work very smooth after adding a little amount of grease to the gears and 30 minutes on the servo tester in automatic mode for a break-in with a 4-cell Ni-MH battery. They run smooth as silk after this procedure and gave my old Belt CP new life due to far more precise cyclic and collective response. Just had to modify the chassis a little to make them fit. They work well with the 5,5 volt SBEC in the YEP 30 A ESC, not glitches after 2 months of flying and fun with my old crate. So cheap and so good, that was a nice surprise for me.

that the best choise to use it for wing servo in the hk viper jet.strong servo and it almost works by top speed. stall speed quit good

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

that the best choise to use it for wing servo in the hk viper jet.strong servo and it almost works by top speed. stall speed quit good

  1. 1
  2. 2
  3. 3
  4. 4
Customer files
No File Name Download [143]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save