New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

HobbyKing™ Mi Digital Servo 25T HV/MG 11.8kg / 0.06sec / 61g

HobbyKing™ Mi Digital Servo 25T HV/MG 11.8kg / 0.06sec / 61g

Shipped From:
  • Global
QTY:

Now save Uložit 0,00 € 0,00 €

33,07 €
Stav:
Backorder
Váha:
92 g
SKU:
HK47179TM-HV
WANT FREE SHIPPING? Click here to find out more!

The HK Mi Series servos represent the next break through in high precision servo technology. Using Magnetic Induction, rather than a potentiometer, for an unsurpassed level of accuracy and performance.

Specs:
Voltage: 6.0v / 7.4v
Speed: 0.07sec/60deg (6.0v) - 0.06sec/60deg (7.4v)
Torque: 9.60kg.cm (6.0v) - 11.8kg.cm (7.4v)
Size: 40.1mm x 20.5mm x 39.4mm
Weight: 61g
Gear Train: Full Titanium Alloy
Motor: Coreless
Spline Count: 25

 Mi : Magnetic Induction, uses a Magnetic Rotary Encoder in place of a traditional potentiometer (invented in 1877). Magnetic Rotary encoders have a longer life and suffer less wear.

 

  • SKU HK47179TM-HV
  • Brand HobbyKing
  • Hmotnost ( g ) 92.00
  • Délka 90.00
  • Width 21.00
  • Výška 90.00
  • Točivý moment ( kg) (min . 0,01 kg ) 11.80
  • Rychlost ( Sec / 60deg ) 0.06
  • A ( mm ) 44.00
  • B ( mm ) 40.00
  • C ( mm ) 40.00
  • D ( mm ) 20.50
  • E ( mm ) 55.00
  • F ( mm ) 30.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I have bought 15 of this servo. I use them in all my touring cars, and have sold it to most of my friends in the local club. 2 has failed, one did not work and one failed after short time use. I still use my oldest ones, they have now been in use for over 2 years. Only remember to adjust the endpoints, if not adjusted, the servo will be not work very long. If correctly adjusted, you have the servo for a loooooong time :-)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have bought 15 of this servo. I use them in all my touring cars, and have sold it to most of my friends in the local club. 2 has failed, one did not work and one failed after short time use. I still use my oldest ones, they have now been in use for over 2 years. Only remember to adjust the endpoints, if not adjusted, the servo will be not work very long. If correctly adjusted, you have the servo for a loooooong time :-)

Gears are to weak ,ripped of the teeth after 10 minutes ,only used as a brake servo in a big scale car.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Gears are to weak ,ripped of the teeth after 10 minutes ,only used as a brake servo in a big scale car.

Schrott, ist nach nach ca. 30min Einschaltzeit an 2S verreckt und bis heute nicht ersetzt. Vergesst den den Dreck.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Schrott, ist nach nach ca. 30min Einschaltzeit an 2S verreckt und bis heute nicht ersetzt. Vergesst den den Dreck.

Have build in KDS600FBL on Swashplate in late Spring 2013. Fly with Microbeast @ 7,4V and TDT Head. Over Summer the Heli has done above 40 Flights Slow 3D. Servo is fast, strong and smove.
By powering up the Heli before Flight, i hear the Nickservo scratch. At home i find the Gear has lost the top of the tooth over the quater round. Fond the same Picture in Rollservo. The Gear is to weak for the Power of this Servo.
Please HK, give these fine Servo a better Gear for 5 or 10 Buks more!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Have build in KDS600FBL on Swashplate in late Spring 2013. Fly with Microbeast @ 7,4V and TDT Head. Over Summer the Heli has done above 40 Flights Slow 3D. Servo is fast, strong and smove.
By powering up the Heli before Flight, i hear the Nickservo scratch. At home i find the Gear has lost the top of the tooth over the quater round. Fond the same Picture in Rollservo. The Gear is to weak for the Power of this Servo.
Please HK, give these fine Servo a better Gear for 5 or 10 Buks more!

They seam to have enough power and speed , not sure how tough they are as I was landing my 50cc the were in and landing gear collapsed , bit of a weak design and when i checked the aileron servos the gears were sticking then i tested to see how they handled some resistance and they sheared the gears quite easily , the elevator and rudder ok but time will tell I guess to see if they last .3 Star just cause Im not sure at the moment and they are not that cheap compared to the 958

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

They seam to have enough power and speed , not sure how tough they are as I was landing my 50cc the were in and landing gear collapsed , bit of a weak design and when i checked the aileron servos the gears were sticking then i tested to see how they handled some resistance and they sheared the gears quite easily , the elevator and rudder ok but time will tell I guess to see if they last .3 Star just cause Im not sure at the moment and they are not that cheap compared to the 958

very good, fast and strong, I like aluminium heat sink. thank you HK

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very good, fast and strong, I like aluminium heat sink. thank you HK

Testing them on the swash of a X7, with a 47902 on the tail.
Using a servo tester, speed was slower as specs, power ok.
Accuracy fair-good, not as good as some other servos (Futaba, servox) i have used.

These servos seem to be really powerhungry. Some of the erratic behaviour of these MI servos reported elsewhere might be related to that fact. When hooking up just one servo to a std HBEC at 6v, the BEC was sometimes exhausted by just powering up, causing erratic behaviour. With a WR Super BEC or Quasar no problems.

I have noticed a slight tremble, especially on the tail. Running the tail at 250mhz.



verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Testing them on the swash of a X7, with a 47902 on the tail.
Using a servo tester, speed was slower as specs, power ok.
Accuracy fair-good, not as good as some other servos (Futaba, servox) i have used.

These servos seem to be really powerhungry. Some of the erratic behaviour of these MI servos reported elsewhere might be related to that fact. When hooking up just one servo to a std HBEC at 6v, the BEC was sometimes exhausted by just powering up, causing erratic behaviour. With a WR Super BEC or Quasar no problems.

I have noticed a slight tremble, especially on the tail. Running the tail at 250mhz.



servo resolusion good



servo speed good





but,,,



servo horn > weig down (by hand) -> servo horn (>Vibration(tremble.)),,,maybe Semiconductor chips > Cheap





other expensive servo-> Not vibration(tremble)...



verified_user Quality:
trending_up Value:
playlist_add_check Overall:

servo resolusion good



servo speed good





but,,,



servo horn > weig down (by hand) -> servo horn (>Vibration(tremble.)),,,maybe Semiconductor chips > Cheap





other expensive servo-> Not vibration(tremble)...



I am using them on a Flybarless Trex700e cyclic, so far they are excellent. Fast, Accurate and Strong, The casing has been updated since this photo, they now have the same case as PRODUCT ID: 019000001 which is actually bettter.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I am using them on a Flybarless Trex700e cyclic, so far they are excellent. Fast, Accurate and Strong, The casing has been updated since this photo, they now have the same case as PRODUCT ID: 019000001 which is actually bettter.

Used for elevator on a 6 meter glider during extrem speed . Fantastic answer, do not find any bad thing to say.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Used for elevator on a 6 meter glider during extrem speed . Fantastic answer, do not find any bad thing to say.

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save