The HobbyKing™ Mini DLG with Ailerons is a brilliant model perfect for those looking to get into DLG gliders without the hassle and expense of building a traditional kit! Small in size, excellent construction quality and a high level of pre-assembly, all at a price that can't be beat!
The carbon reinforced wing is built from balsa and covered in ultra-light film, as are the horizontal and vertical stabs. The boom is constructed of carbon fiber while the detachable fuselage pod is made from a combination of light ply and plastic. All this combined makes for an ultra-light model with excellent flight performance!
The Mini DLG arrives with the wing, fuselage and tail sections pre-assembled, as well as the servos, pushrods and control horns all pre-fitted. After opening the box, you will simply need to bolt on the wing, the horizontal stab and install your own receiver/battery.
• Excellent build quality
• High level of pre-assembly
• Ultra-light balsa and carbon fiber construction
• One piece bolt-on wing and horizontal stabilizer
• Servos, pushrods and control horns pre-fitted
Wing Area: 11.16dm²
Flying Weight: 160g (can add ballast weight for windier days)
Servo: 3 x 3.6g micro
Minimum 2CH transmitter and receiver (micro receiver recommended)
4.8~6V receiver battery (less than 25g recommended)
UBEC/Voltage regulator (if using 2S lipoly receiver battery)
*Note: Receiver battery output voltage must not exceed 6V if running directly to receiver without a UBEC/VR, otherwise damage to servos may occur.
Hmotnost ( g )
It looks nice, but is flying poorly ...
Balancing recommended by the manufacturer is bad, you have to pry more forwardPlane flying nice and stable. The quality is hard to be desired. The carbon boom is already broken down the length at the first rough landing. This seems to me more glasfiber in carbon look. In the wing, various parts timber not properly glued. Give a little more money and buy a real plane.Totally rubbish product.
The boom is far too thin and broke on the second launch. (didn't even throw it hard)
No spare parts available anywhere. Don't waste your money on this.
(this is the second review I've posted about this. first one removed by HK Guess they don't like people saying how rubbish there products are.)This is the first DLG i have bought. The quality is ok, in relation to the price. After a few minutes of programming my Taranis i was able to go to the field for my first flights. Without any experience or thermals, i was able to fly for just under 30 seconds. Its a great start into the world of DLGs!The HK mini DLG with rudder and elevator only is better in every way (I bought this as an upgrade). First ruff landing and the rudder broke, after opening it up to repair it I noticed NONE of the joints in the rudder were glued! After that I did a closer inspection of the entire plane. Joints and ribs in the wing were not glued, the aileron hinges were not even, the aileron tape was coming off already, the fuse had a crack already(!!!) and the fuse is thinner and more flexible than the mini fuse!!!!!!
After all that I would recommend the other HK mini DLG. BUT BUT BUT... for the $$ it is worth every pennie! But ya its cheap!Really nice DLG, it is my first wooden plane, and it held up really well, nothings broke till today, my foamies are more fragile than this plane :)I'm giving this baby a rare 5-crown review. I was given this as a Christmas gift at the end of 2014 when my wife asked what I'd like. I had it together in less than an hour with a lemonRX receiver, BEC and 300ma battery. Then, it sat quietly for almost four months waiting for winter to end. Ugh. I finally took it out and built up the necessary technique to toss in, oh, two throws. It immediately flew perfectly, caught some thermals and I was hooked. The build quality is excellent, but it's the performance I really love. It's like a mini hot liner without a motor... well, the motor is your arm. I had forgotten how much I love gliders until I flew this and now I can't wait to get back out to the field!Somewhat poor quality overall, boom broke on the first landing from just hitting some grass. Flies somewhat ok tho, until I crashed it and now have to do a wing repair since they broke in half. Upon removing some covering I saw that there are huge gaps in gluing everywhere, the trailing edge was not even glued to the wingtip. Don't throw this one too hard or it will fall to pieces. I would recommend a better quality glider form a better brand.I am flying this modell with 1-cell LiPo w/o any problem, no 2-cell bat. and BEC needed.
The receiver is "FrSky D4R-II 4ch 2.4Ghz ACCST Receiver". Lighter weight, perfect choice.Hi there, I purchased this glider a month ago and I absolutely love it. The build quality is good, well packaged before being shipped. Nothing missing or broken when the model was delivered. I am flying it with the Turnigy nano-tech 600mah 1S 35~70C. and a light weight 6ch receiver. After a few flight i realized that I didn't need such a big battery, a 300mah would have been plenty enough. on the 600mah i can stay up for 2 hours and the battery will still be over 3.5V. Also, I have attached the receiver on the leading edge of the main wing, it fit perfectly underneath the rear end of the canopy! The center of gravity is well respected then.