This is the most secure and strongest way to bolt your HXT outrunner into the front of your plane.
Mount is made from hardened and machined alloy and is very light.
Hmotnost ( g )
Look greate and works fine! Thakns hobbyking, good price!
Gona try this one in a sebart sukhoi 140 with 20*8 apce prop.
Perfect clone for the axi, even beter compared with the price. Have many turnigy engines and no falures yet. Glue the magnets and your good for hundreds of flights.Very nice motor mount. Strong and light alloy. Fits the Turnigy 50-65 perfectly.Sehr sauberer Motoreinbau. Alles aus Alu eloxiert. Edel. Funktional. Man kann den Motor auf 2 Arten einbauen. Einmal, dass die Welle rausschaut und der Prop auf diese kommt. Oder man baut ihn anders rum ein, so dass die drehende Rckseite direkt fr die Prop. Montage genommen wird. Der Adapter fr den Propeller liegt den Motoren immer dabei. Supersache und flexibel.Exellent mounting it is good to keep a couple in stock in case they are neededsturdy ideal motor mount lock tight the screwsmontante com tamanho exato para tucano 120 triones, parece que foi feito pra ele. Excelente!This is a superb motor mount which is well made and very solid. As a precaution I would recommend assembling it with some form of loctite just to ensure it doesn't work loose.The above picture does not depict the reverse chamfering of the motor mounting holes on the X pieces.
Snapring retainer collar hole on mount is 16mm or 5/8"
Very nice mount with good machine work.
Anodized the same color as Turnigy motors.
End to end length of 92mm or 3 5/8"
End to end width of 82mm or 3 7/32"
Inside length of 80mm or 3 5/32"
Inside width of 59mm or 2 5/16"
Holes for mounting motor are 31mm or
1 3/16" center to center.
The way the x pieces are machined with one piece having the motor mounting holes chamfered on the opposite side from the other piece, allows you to mount the motor inside or outside the mount.
The only negative I can give this mount, is the center hole on the x pieces is too small for the snapring retainer collar to fit through, just like the mounts that come with the Turnigy motors. I am going to do what 1 person suggested on the Turnigy 50-65 motor Review page, use some washers between the collar and snapring. Widening the hole is another option.
All in all, I'm happy with this mount, and will be buying more.