A high powered charger, capable of handling up to 350W or 20A charge rates. Lipoly, LiFe and Lilo compatible as well as able to charge up to 10 cell packs.
The iCharger is famous for its super-accurate balancing feature. Each unit is calibrated at the factory prior to shipping!
This is a quality precision charger.
Input voltage range: 4.5 ~ 32.0VDC
Charge current range: 0.05 ~ 20.0A
Discharge current range: 0.05 ~ 20.0A
Maximum charge power capacity: 350W (@ input voltage > 18V)
Maximum discharge power capacity: 30W
Maximum extern discharge power capacity: 600W @ 30V/20A
Current drain for balancing: <350mA
Balance accuracy: <10mV
Lithium (LiPo/LiIo/LiFe) battery cell count: 1 ~ 8 series (In non-balance mode, expand LiFe to 10s)
NiCd/NiMH battery cell count: 1 ~ 25 series
Pb battery cell count: 1 ~ 18 series (2 ~ 36V)
Log Files storage: 16Mbit (36 hours)
Battery setup memories: 10
Intelligent temperature control: Yes
PC Connect: USB port
Dimensions:(LxWxD) 143 x 97 x 26mm
One copy of the User manual on CD
One pair of output alligator clip leads
One pair of input alligator clips (30A) and input leads with 4mm bullet connectors
One temperature sensor lead: 0 ~ 99°C (32 ~210°F)
Four rubber feet
One Mini-USB data line(1.2 meter)
Balance expansion board and interface cable to connect to the charger
Note: Power supply not included.
Kapacita ( mAh )
Hmotnost ( g )
had this charger for a year or so great unit BUT have lost (put in a safe place?) the balance lead can hobbyking supply spares???
thanksMy charger only lasted two charges and unfortunately deleted without burning smell, or smoke, just stopped working. The HobbyKing sent send to Brazil warehouse for repair. It was time and money lost, the warehouse is no more the product has been returned to me. I am trying to contact manufacturer might help me. http://www.rcgroups.com/forums/showthread.php?t=839657Excellent charger. Charges my 4s 5600 packs in 20 min. Highly recommend the p350 Power supply from Junsi who also makes this charger.. As always excellent shipping from Hobbyking aswell. Balance board is included!I received mine yesterday. I can confirm the accuracy of the balance mode. I tested it with a 6S lipo and a calibrated Agilent (nov 2012) multi-meter: at the end of charging I got a /-5mv difference per cell compare to the 4,2V target. This is very, very good!! The advertising "Balance accuracy: <10mV" is true.I am very pleased with this charger. It came with the latest firmware and checking with my multimeter the charger is very accurate. The balancer is more powerful than most standard chargers, meaning you can keep your lipo batteries in better condition and maybe get a little more life from your older packs. It is also much safer if you plan to charge at the higher rates this charger is capable of.juste extra ordinaire
le chargeur tout faire simple et performantJe suis extrmement satisfait du iCharger 208 B que j'ai achet chez Hobby King. Il est nettement plus performant que le Robbe-Futaba que je possdais auparavant.
Matriel recommander pour tous les aromodlistes.
PlaneaddictGoodas normal icharger productVery nice charger. Comes with balance board and accessories shown in the picture. Works perfectly with a converted HP 120 W power supply from an old docking station if you don't need to charge at the highest rates.Well, I haven't been able to use the charger to its full capacity yet. I couldn'd use the balancing function. Every time I tried I got the Bal. Error message. After two days searching for a solution I discovered that the balancing board came from HK burned. Let's just hope this is the only problem! I'll post an update after I buy a new board. Check out the picture of the burned board I uploaded. I had to lift the rubber cover glued on the pcb.