A high powered charger, capable of handling up to 1000W and 30A charge rates. Lipoly, LiFe and Lilo compatible as well as able to charge up to 10 cells at a time.
The iCharger is famous for its super-accurate balancing feature, and now it packs a 1Kw punch!
Each unit is calibrated at the factory prior to shipping!
This is a quality precision charger with huge power!
Input voltage range: 4.5 ~ 38V DC
Charge current range: 0.05 ~ 30A
Discharge current range: 0.05 ~ 30A
Maximum charge power capacity: 1000W @ input voltage 23V (500W @ input voltage 12V)
Maximum discharge power capacity: 80W
Maximum regenerative discharge power capacity: 1000W
Maximum extern discharge power capacity: 1200W @ 40V/30A
Current drain for balancing: <500mA
Balance accuracy: <10mV
Lithium (LiPo/LiIo/LiFe)battery cell count: 1 ~ 10 series(In non-balance mode, expand LiFe to 12s)
NiCd/NiMH battery cell count: 1 ~ 25 series
Pb battery cell count: 1 ~ 18 series (2 ~ 36V)
Log Files storage: 16Mbit (31 hours)
Battery setup memories: 10
Intelligent temperature control: Yes
PC Connect: USB port
Dimensions (L X W X D): 143X123X46mm
One copy of the User manual on CD
One pair of output alligator clip leads
One pair of input alligator clips (30A) and input leads with 4mm bullet connectors
One temperature sensor lead (0 ¨C 99¡æ(210 oF))
Four rubber feet
One Mini-USB data line(1.2 meter)
Balance expansion board and interface cable to connect to the charger
Note: Power supply not included.
Kapacita ( mAh )
Hmotnost ( g )
With this charger, you may adjust end voltage to max 4.30V/cell .So, it is near the 4.35V recommended for Turnigy BOLT HV new batteries.Superbly worked 1.5 years.
Burned when the battery is connected to the wrong place polarity.
Protection in this case declared by the manufacturer of the charger.
No repairs will not find. Parts of these chargers do not sell.
I tried to write to the manufacturer icharger, there is no answer.
once this expensive thing will be thrown in the trash.
Any more icharger I do not need.Already a dozen charges at different rates with different packs : easy to use, great power, not noisy : I like it !A high quality powerful charger. Coming from 2x 106Bplus you can see why Im excited about this charger. It has all the features of the 106Bplus plus more power and features. The internal logging is a very handy & easy to use feature, heaps of power with 30A to do parallel charging on 6S. I have mated this to my turnigy 60A, 1080w PSU.
As per usual I do have a few grips. Not overly liking the looks/style of the unit, but the construction of all metal acting like a heat sink and metal buttons is good. My usb port is loose (cable doesnt have the click or solid feeling). No 3mm jack for those days of just discharging lipos and my internal voltage reading was needing calibrating. These minor Cons are blown away by the 80W discharge though. I can now discharge my 2650mAh 6S in under 30mins at 3A (75w) and the charger is only hitting 40deg internal. Love it love it love.
Thanks HK & iChargerMy unit is 4 months old, used 3 times. Today it will not charge, just reboots, and cycles over and over. For the price I am very disappointed. Returning it for out of warranty repair will be expensive for postage and take a long time. This is unacceptable for such an expensive charger. I expected much better.
BUY ANOTHER BRAND!
Thanks for reading my review.I wanted to make a post to correct my previous post. I have been using this charger for around a year now on average of 10 times per week. I am charging 6 x 6s packs in parallel (previously typed series by mistake). at 30 amps. I always power with 24 volts and plenty of power. I think many people go wrong by trying to under power these units.I have been using this charger for around a year now charging on average of 10 times a week. I charge 6 x 6s packs in series at 30 amps. This is a great charger and a must have, lots of power and very compact.I also had some fire and a lot of smoke out of this device while charging 8s LiPo at 8A from a car's 12V Pb!Using mine since 10 months. Every week I'm charging 3 till 9 of my F3A packs, 10S 5000 mAh with an charging rate of 5 to 10 amp. The powersupply input is 15 Volt. I'm very happy with this charger an when my Thunderpower 1010 will stop working I will replace by a second of this 3010B charger.It is the best battery charger for this money! Take, will not regret! To all I advise!