Product Finder


Useful links

Live Chat
Shipped From:
  • Global

ImmersionRC 700mW 2.4GHz Audio/Video Transmitter

ImmersionRC 700mW 2.4GHz Audio/Video Transmitter

56,91 €

50 g

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!


The NexWaveRF based 700mW 2.4GHz audio/video transmitter greatly increases the range of your video link, adding a margin of security over commonly used 5.8GHz transmitters. Team this TX up with either a Duo2400 or Uno2400 for amazing image quality and range.

Built on the same game changing NexWaveRF technology that has made the ImmersionRC 5.8GHz transmitters such a renowned success the 2.4GHz audio/video transmitter is built on this proven technology to offer you the best possible image quality, durability and ease of use. Sporting roughly the same size and weight as the ImmersionRC's 5.8GHz audio/video transmitters the new 2.4GHz audio/video transmitter brings a few features to market that will allow you to further reap the benefits of choosing ImmersionRC's equipment for your next FPV mission. The 5V output has been beefed up to handle up to 1.5A of current output, which means you can power, and charge, your HD camera such as a Mobius, straight off of our audio/video transmitter. So no more fiddling with external 5V supplies, just hook it up and be done with it.  The new 700mW 2.4GHz transmitter is designed to run straight off of your main flight-pack and supports a wide voltage input range of 6-25V (2~6s) direct. Due to its extremely low-noise, highly efficient switching regulator, there's no additional heat being generated when running off of higher voltages and the switching regulator's input is well filtered to cope with noise from your speed controller, or other electronics connected within your aircraft.

The NexWaveRF based 2.4GHz audio/video transmitter has a 700mW/28.5dB RF output power, putting it a notch above the commonly available 500mW 2.4GHz transmitters from other manufacturers. It features the same industry standard locking connectors for connecting your battery and camera or audio/video source as featured on ImmersionRC's other products. This makes the new 2.4GHz audio/video transmitter fully compatible with the existing 5.8GHz audio/video transmitters; it can be swapped out directly as all the connectors, and connector pin-outs, are the same. This also applies to the SMA-female antenna connector used.

• 700mW transmitting power (can be used license-free in Europe)
• NexwaveRF based
• 5V 1.5A output for FPV camera and charging
• Small Size
• SMA Antenna Connector
• Onboard quiet switching regulator 2~6s direct capable

RF Module: NexwaveRF 
Power supply: 6~25V (2S-6S supply) 
Power out (to camera): 5V, 1.5A max 
Transmitting power: 700mW 
Operating Frequency: 2.4GHz (2410,2430,2450,2470,2370,2390,2490,2510)
Dimensions: 57 X 23 X 12 mm 
Weight: 18g (without dipole antenna)  

Note: White connector on the back of the transmitter is for connecting an ImmersionRC TinyTelemetry accessory. (adds Telemetry data to the audio channel for Antenna tracking)


Další informace

  • SKU:
  • Brand:
  • Hmotnost ( g )
  • Délka
  • Width:
  • Výška:

Napište vlastní recenzi

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
A little expensive, however its performance makes it worth the price!
needs a little patience to find out which channel works best with different area, a pain in the arse. 3 watts power consumption isn't that bad, would last for 20 minutes with a 3s 480mah battery.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload video

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Štítky produktu

Štítky oddělujte mezerou. Víceslovné uzavřete v apostrofech (').