New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

In-Flight Voltage Logger & Health Analyzer (2S-6S)

In-Flight Voltage Logger & Health Analyzer (2S-6S)

Discontinued Product

Please continue searching for a similar product.
Váha:
45 g
SKU:
HK-L1
WANT FREE SHIPPING? Click here to find out more!
The in-flight voltage logger and health analyzer records and instantly measures your Lipo/LiFePo pack with a standard balance connector.
Accurate to .01v and displays all voltage in a single page.
Also displays the Min. & Max. voltage as well as health status of the battery and also has a Battery Voltage Discharge Curve Logger, it's function is to record your battery discharge voltage and display as a curve graph.  
It can record the lowest voltage during the flight and also has Interface for Battery type selection, Discharge curve base line value setting and voltage measurement trimming interface, which allows to adjust the voltage drift.
 
Battery Applicable: 2S ~ 6S Li-xx  
Input Voltage : 3V ~ 25V
Working temp.: -20C~50C
Dimensions : 53x29x5mm
Weight : 9g
  • SKU HK-L1
  • Brand -
  • Kapacita ( mAh ) -
  • Hmotnost ( g ) 45.00
  • Délka 70.00
  • Width 10.00
  • Výška 27.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Remark: Calibration take some time and patience. Pushing A and B button at the same time is a kind of Russian roulette. Setting cycle time and LiPo/LiFe can be problematic. If for instance cycle time is set on 4 seconds pushing A and B to confirm (and you mistakably push A and B not exactly on the same time) the time is set to 3 or 5 seconds. Unfortunately you have to start all over at the beginning. Produce a graphic of the LiPo total voltage during the flight together with the hold the lowest voltage per cell is not possible. Its the graphic or the hold function.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Remark: Calibration take some time and patience. Pushing A and B button at the same time is a kind of Russian roulette. Setting cycle time and LiPo/LiFe can be problematic. If for instance cycle time is set on 4 seconds pushing A and B to confirm (and you mistakably push A and B not exactly on the same time) the time is set to 3 or 5 seconds. Unfortunately you have to start all over at the beginning. Produce a graphic of the LiPo total voltage during the flight together with the hold the lowest voltage per cell is not possible. Its the graphic or the hold function.

After calibration with a 6 S power source the In- Flight data logger works perfect. Just press button A just before flight and afterwards you know exactly the lowest voltage per cell during the flight. I set the sample rate or cycle time on 4 seconds which gives me 8 minutes measuring time. Dont forget to set the battery type on L (LiPo) Remark: during calibration be sure you A and B at the same time otherwise the setting changes un-intentionally.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

After calibration with a 6 S power source the In- Flight data logger works perfect. Just press button A just before flight and afterwards you know exactly the lowest voltage per cell during the flight. I set the sample rate or cycle time on 4 seconds which gives me 8 minutes measuring time. Dont forget to set the battery type on L (LiPo) Remark: during calibration be sure you A and B at the same time otherwise the setting changes un-intentionally.

display is not clear plusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplus

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

display is not clear plusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplus

This device is really useful for measuring the pre-flight voltage, minimum voltage in-flight, and voltage after the flight. The difference between the minimum in-flight and after flight voltages gives an indication of battery health. In my setup the difference is ~ 0.2 volt, and I can expect this to increase as the batteries age. I can use these results to adjust my flight time (transmitter timer) so that the battery voltage does not discharge too low in-flight.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This device is really useful for measuring the pre-flight voltage, minimum voltage in-flight, and voltage after the flight. The difference between the minimum in-flight and after flight voltages gives an indication of battery health. In my setup the difference is ~ 0.2 volt, and I can expect this to increase as the batteries age. I can use these results to adjust my flight time (transmitter timer) so that the battery voltage does not discharge too low in-flight.


Disapointing - dosent show the correct voltage. First I thought my charger ballances wrong. Tried another charger. Both chargers show 4.20V on all 6 cells but the logger shows 4.20, 4.20, 4.17, 4.18, 4.19, 4.21
to bad for $20

verified_user Quality:
trending_up Value:
playlist_add_check Overall:


Disapointing - dosent show the correct voltage. First I thought my charger ballances wrong. Tried another charger. Both chargers show 4.20V on all 6 cells but the logger shows 4.20, 4.20, 4.17, 4.18, 4.19, 4.21
to bad for $20

must have tool. Wery good for indication of the health of the battery. For JST, XHT connectors

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

must have tool. Wery good for indication of the health of the battery. For JST, XHT connectors

A nice little tool for managing batteries, but unfortunately can not PolyQuest connectors.

Otherwise, everything very well.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A nice little tool for managing batteries, but unfortunately can not PolyQuest connectors.

Otherwise, everything very well.

preciso, leggero, prezzo buono.

5 stelle

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

preciso, leggero, prezzo buono.

5 stelle

t of a bad connection in it, as I sometimes have to press on the outer cover right where it says "in flight voltage logger" to get it to work. Probably a bad solder job... If it wasn't for that, it would definitely be a five star review. Reply to this..

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

t of a bad connection in it, as I sometimes have to press on the outer cover right where it says "in flight voltage logger" to get it to work. Probably a bad solder job... If it wasn't for that, it would definitely be a five star review. Reply to this..

I think it will help to improve battery life too.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I think it will help to improve battery life too.

  1. 1
  2. 2
  3. 3
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!