Easily monitor your model's voltage and watts in real-time with this compact in-line meter. Its small and lightweight design allows it to be mounted in just about any model. The power input and output leads are pre-installed, and just require you to add you favorite battery plugs to install in your model.
Max input voltage: 30V
Max input current: 30A
Voltage accuracy: +-0.01v
Current accuracy: +-0.01A
Start-up voltage: 5.0V
Power consuption: 15mA
Dimensions: 41 x 21 x 11mm
Hmotnost ( g )
Be aware, this is not a Wattmeter! It alternates between voltage and current. You can, however, calculate wattage by multiplying volts by amps. Hobbyking, please change the description.I use it for my Lipo - Soldering Iron 12v/3s. Very good stuff for the pricePratico strumento per la misurazione del voltaggio dei vostri pacchi batterie fino a 13 volt viste le sue ridotte dimensioni si pu installare velocemente sul vostro modelloA MUST HAVE in your kit! Allows you to easily experiment with battery/ESC/motor/prop combinations without frying your gear; just remember to throttle up gradually while watching the meter, before going WOT, and you'll be okay!Comes with no instructions and you will have to add your own plugs etc to the wires.
great for working out max volts and amps and great for model boaters who need a speed controller this will help work it out so you know what to buy.
The product it self is very nice and well made but is devoid of instructions!
please also be aware that when working out the wires you will ont get help so please refer to the videos and files contained on the hobby king site.
funktioniert wunderbar, knnte ein klein wenig schneller durchschalten aber tut was es soll. Bei berlast zeigt es einen roten Querstrich
vary good vol and amp meter it just worksverry good thank youVoltage depends of voltage range.
6-12V - accuracy ~0,1V, but 20-30 - accuracy 0,2-03V
Have to check amperage accuracy latergreat for testing amp draw.