Looking for an inexpensive auto pilot system with all of the functionality of a professional big brand system? The JIYI P2 Auto pilot system will definatly fit the bill!
The P2 Auto pilot system is packed with features and flight modes that will transform your multirotor and will provide you with a professional flying experience with all of the safety features and flight modes of the market leading systems.
The P2 system is suitable for multirotors with a maximum diameter of 800mm and suits many of the commonly used multirotor configurations including, X Type quads and hexcopter.
The system offers superior stability and precise spot hovering making it perfect for your aerial photography and videography. With several flight modes the P2 system covers a multitude of flying styles from novice to the budding aerial photographer and advanced sport flyer.
The P2 system offers USB connectivity and is compatible with windows XP, SP3 and Windows 7, which will allow you to configure and fine tune your multirotor. The V2 version has revised firmware for improved overall performance.
• Supports PPM, PWM and SBUS Receivers
• Provides superior stability and precise spot hovering
• Supports multirotor type aircraft with rotor diameter up to 800mm
• Designed for X-type and hexcopter
• Supports PWM ESC below 490hz
• Suits PCM or 2.4Ghz radio systems
• Compatible with windows XP, SP3, Windows 7
• Flight modes: GPS, headless mode, intelligent direction mode, Hover and return to home.
• Low voltage protection
• Micro USB connectivity
Working Voltage: Main controller 4.8V ~ 5.5V
LED/ Power Module: Input 7.4v ~ 6V (recommend 2S~6S LiPo) Output 2A @ 5V
Power Consumption: <2W
Working Temperature: 0C – 60c
Storage Temperature: -40C +60c
Hovering Tolerance: Horizontal level ±2m, vertical Level ±0.8m
Maximum Tilting Angle: 30°
Maximum Vertical Speed: 6m/s
Main Controller: 32g
GPS/Compass Module: 32g
LED/Power Module: 20g
Main Controller: 48 × 38 × 17mm
GPS/Compass Module: 54 × 15mm
LED/Power Module: 30 × 28 × 10mm
GPS Compass Module
LED Power module
Fixtures and fittings
Hmotnost ( g )
dont waste your money , I bought 3 and try 1 , its cant be arm , and ch6 are unfuncion, I will try 2 last , I hope it can work normaly , I am disapointed , about QC from Hobbyking , its bad .....dont waste your money , I bought 3 and try 1 , its cant be arm , and ch6 are unfuncion, I will try 2 last , I hope it can work normaly , I am disapointed , about QC from Hobbyking , its bad .Bought 4 units and 2x have problem, Jiyi got QC issue. HK want me to sent back to warehouse will cost me more then 50pcnt of the unit cost since i bought it at offer prices. So i choose to bin it. that bad luck for me and no more taking risk with Jiyi.....Great flight controller, especially for simple stabilize mode and hovers / gps. Can do sport mode (I understand it might be acro). Great aluminum box. Software not as good as DJI and can be refined abit more, but for the price is great and performance great do compare with Jiyi P2 Pro, that one offers better hover and can connect to GCS (Android). Like my P2 Pro review, you may have to manually callibrate the ESCs as there is no step in the software to do this, but is just basic plug the ESC servo leads directly to the Receiver and calibrate using throttle stick.I only knocked the Quality score due to a bad GPS puck that HobbyKing resolved today. Otherwise, I have this FC installed in a 500mm quad with a gimbal, 1.2Kg with battery. The P2 performed admirably well in good conditions on stock gains, though it got sloppy when windy until tuned. Now I can't believe the performance of this little FC. Did I mention it was only $46?
The look of the case is amazing, a real shame I have it sandwiched inside a frame. The power and combo LED/USB modules share the same CNC aluminum look, and are logically designed, incorporating little features - such as wires all exiting on the same side of the module - that made installation and troubleshooting easy. The OSD system from Jiyi is compatible with this FC, and together they rival my DJI Naza M V2 for GPS and attitude stability, as well as RTH peace of mind. For a sixth of the price. 1/6. That's six of these, for one of those - oh never mind you get it.
The GUI, I have to be honest, is not great. It is not perfect, in that the language used throughout is Google-Translate worthy, and there is no clear understanding in how to update firmware, (launch the P2uploader.exe that comes with the GUI, point at the downloaded Bin file from Jiyi). Get past that, though, and you have the features you need, at a price that is unheard of.hI,
gOT THE PRODUCT AND AFTER 4 DAYS OF TRYING TO SET IT UP I GAVE UP. Too many issue with quality. I had to solder black wire in gps and as well my aileron channel doesnt work. I cant trust this brand.....After trying numerous times to contact JIYI Support and HobbyKing for support with no success, here is my honest review. It powers up, it connects to the assistant software and that's it. Whilst it looks nice, it's currently useless. I'd love some support regarding this issue? anyone got any ideas?
Time will tell, otherwise, heed this warning, don't waste your money.amazing quality and price it works great very stable.Very pleased with this controller and GPS. Position hold is solid, and return to home. Was easy to setup.
WARNING WARNING WARNING WARNING!!!!!!!!!!!!!!!! MAKE SURE TO UNPLUG ALL RED WIRES FROM YOUR ESC'S BEFORE PLUGGING IN LIPO BATTERY. My 1st JIYI worked perfectly because (I believe) I cut the ESC red wires so the voltage did not conflict with the supplied power supply unit. My buddy got one and didn't do that and his JIYI quit working after 1st hover test. My second unit I forgot to do that and mine quit working while trying to c***brate the motors. (had lipo plugged in.) EVERYONE>>>>>> let us know if that could be your cause of failure.