New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

JR MPH83TWV Linear Hall Sensing Wide Voltage Brushless Servo with Metal Gears and Heatsink

JR MPH83TWV Linear Hall Sensing Wide Voltage Brushless Servo with Metal Gears and Heatsink

Discontinued Product

Please continue searching for a similar product.
SKU:
422000034-0
WANT FREE SHIPPING? Click here to find out more!

The MPH83TWV is a very impressive servo, extreme torque and a reasonably high speed, it has been designed for use with aerobatic aircraft and helicopters but is also great for many other uses where a high spec servo is required.
The repetitive motion of a servo whilst in use places a large burden on each component. The recent development of brushless motors has increased the product life of servo motors dramatically, however, when determining servo position using existing potentiometers, long-period use causes wear inside the potentiometer parts so that smooth linear operation becomes impossible. To address this issue JR has developed a new type of servo with non-contact position detection using Linear Hall ICs, which enable position detection using magnetic force. Using this technology, JR has now perfected its next generation of MPH Series Linear Hall Sensing Servos.
A variety of receiver batteries are available on the model market. With certain batteries, the modeller must carefully choose appropriate servos or use a regulator between the battery and receiver; otherwise servos may be damaged due to a high-voltage supply. Every WV servo has a micro computer to detect incoming voltage and automatically set the correct voltage for the motor. Another sophisticated benefit of the new wide-voltage servos is the Slow Start function. When your system is switched on, instead of the servos instantly finding centre as quickly as possible, Slow Start assures on initial power up that the servo returns to the neutral position very slowly. The benefit is that you’ll see longer life from the internal servo gears and less wear and tear on the linkages of the control surfaces.
Whenever the utmost accuracy is your aim, the JR Linear Hall Sensor servo will meet your needs.
The motor used in this series of servos is a low-maintenance brushless motor that ensures long life and near instantaneous response. You’ll feel the difference the moment you take off on your first flight.

Specs:
Torque: 26.3(4.8V)/40.6(7.4V)kg.cm
Speed: 0.19(4.8V)/0.13(7.4V)sec/60°
Weight: 73g
Voltage: 4.5~8.5v
Dimensions: 39 x 21 x 40.5mm

About Servos Manufactured by JR Propo:
If used on a large control surface - typically aileron, rudder, elevator or flap on an Airplane. Digital Servos (DS / MP / MPH series) may move slightly around centre while on the ground, this is normal and will not occur in flight.

  • SKU 422000034-0
  • Brand -
  • Hmotnost 154.0000
  • Délka 95.00
  • Packaging Width 35.00
  • Výška 75.00
  • Točivý moment ( kg) (min . 0,01 kg ) 40.60
  • Rychlost ( Sec / 60deg ) 0.13
  • A ( mm ) 46.00
  • B ( mm ) 41.00
  • C ( mm ) 39.00
  • D ( mm ) 21.00
  • E ( mm ) 56.00
  • F ( mm ) 28.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Quality servo. Suitable for my 100cc gas powered Corvus 2750mm wing span aerobat. Used for rudder and elevators. Good power & centre well. You get what you pay for, in this case peace of mind there will be no failures.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Quality servo. Suitable for my 100cc gas powered Corvus 2750mm wing span aerobat. Used for rudder and elevators. Good power & centre well. You get what you pay for, in this case peace of mind there will be no failures.

I have installed this servo in my (used/new to me) Comp-ARF Integral on the rudder. It has very good centering and loads of power. makes a perceivable difference in the advanced sequence. (over the DS8411 that was in it). Thank you Hobby King for stocking such a high end Item at a very good price, even with shipping.
Chris Walker
2013 NSRCA District 7 Intermediate Pattern Champion.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have installed this servo in my (used/new to me) Comp-ARF Integral on the rudder. It has very good centering and loads of power. makes a perceivable difference in the advanced sequence. (over the DS8411 that was in it). Thank you Hobby King for stocking such a high end Item at a very good price, even with shipping.
Chris Walker
2013 NSRCA District 7 Intermediate Pattern Champion.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!