The Spitfire 380 comes 95% ready built. Around 3-4hrs is required to install the servos, motor and finish the wing and tail-piece gluing.
The small EP spitfire set up for the 380 size brushed motor. Appropriate upgrade would be a 150 to 200W system or towerpro power combo such as the following;
TP BM2410-9T / 18A BEC/ 1047 Prop Combo
TP BM2410-9T / 18A BEC/ 9x6E Prop Combo
TP BM2410-08T / 18A BEC / 9x6 Prop Combo
Click below to see our towerpro combos.
Wing Span: 36.2in
Wing Area: 247.8sq/in
Fuselage Length: 31.5in
Engine Required: 150-200W Brushless System
Radio Required: 4Ch
Note: We now stock the updated version of this plane. Which has a 1 piece wing design. It is straighter and flys much better. All orders of this plane will include the 1 piece wing version. We will update photos asap!
*All our planes are double boxed and come with enough bubble wrap to keep a hyperactive child busy for months!
Kapacita ( mAh )
Hmotnost ( g )
The plane I received is not the showed in the pictures and Instruction Manual is for another plane. The plane was very good with combo set up and its look very beautiful.it`s a great plane it`s flying werry wellwell, received my plane and well, it was well packed and i started to the built and i notice that its not the same thing as the manual that was included in it. the wing could use more reinforcement. i test flight the bird and flies great but the landing was nice but the wing clip the ground and like i said wing needs reinforcement cause it broke in haft.Rudders do not fit very well.
overall i had more expectations regarding this model.
Worst thing: NO MANUAL was included so you have to try and cut, screw through the foil on your own.
The plane I received is not the showed in the pictures and Instruction Manual is for another plane. In addition some push-rods are missing.
In the other hand, parcel was received very soon and very well packaged with no damage at all.J'ai fait vol cette avion hier et c'tait tout simlement incroyable. Avion bien stable pour une aile basse, trajectoire tendues, une vitesse incroyable mme mi-gaz, atterrissage aise sur un terrain de taille correct mme accident (pelouse, terrain de sport....)
Je le fait voler avec un moteur KD 36-28S Brushless Outrunner 1140, une lipo 3S 1800mAh, 3 servo HXT900 9g / 1.6kg / .12sec Micro S et une hlice 9*6 ou 10*4,7.
Je vous recommande grandement cet avion, ce prix c'est vraiment d'un rapport qualit prix exceptionnel. Tout simplement gnial.
Merci UH.looks goodPlane was well packed, no damage upon arrival. The covering did need some additional shrinking. The plane in the instruction book has three servo's. One in the wing center section for the aileron's, and two under the cockpit for rudder and elevator. The actual plane you get has four servo's. Two on the wing for ailerons, and the rudder and elevator servo's are mounted in the tail. If you haven't assembled an ARF before and have no kit building experience, this plane is not for you. The instructions are useless. The canopy is finished and pretrimmed, ready to attatch. The cowl is an assembled two piece and already painted. It does require trimming depending on what motor you use. There is no quick easy battery access hatch.
Overall, I like it.Trs bel avion. Il est arriv rapidement et en bon tat. Le kit est trs complet.Beay kit pour le prix. Attention la notice pas adapte, correspond une ancienne version du modle. Nanmoins c'est un trs beau kit !