Registrovat

Product Finder

Nastavení

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registrovat
Shipped From:
  • Global

KB45-12L 1400kv Brushless Inrunner

KB45-12L 1400kv Brushless Inrunner

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Váha:
525 g
SKU:
KB45-12L
Popis
produktu

KB45-12L 1400kv Brushless Inrunner
Kv: 1400RPM/V
Weight: 449g
Shaft: 6mm
Size: 63x45mm
Voltage: 36v
Highest rated power: 2246W
This size motor will fit our larger 5inch and 4.75inch EDF perfectly. (same mounting holes & shaft size)

We are still waiting on the factory for more detailed data on these motors and will update this listing once we have it.

 

 

Product
Specifications

Další informace

  • SKU:
    KB45-12L
  • Brand:
    nedefinováno
  • Hmotnost ( g )
    525.00
  • Délka
    0.00
  • Width:
    0.00
  • Výška:
    0.00
  • Kv (rpm / v)
    1400.00
  • Maximální proudy (A)
    0.00
  • Výkon ( W ):
    2246.00
  • Délka B ( mm ):
    63.00
  • Může Délka D ( mm )
    61.00
  • Maximální napětí ( V)
    36.00
  • Hřídel A ( mm ):
    6.00
  • Unit Weight (g):
    449
  • Průměr C ( mm )
    45.00
  • Celková délka E ( mm )
    83.00
  • Odpor ( mh):
    0.00
Community
Discussions
Rate&
Review

Napište vlastní recenzi

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Can sombody tell me what esc to use.....quickly before there is a fire.....
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
here is a test http://www.youtube.com/watch?v=am8b1tFbkQA
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
WARNING! I received mine with a 5mm shaft, not 6mm as informed on specification above! HK should correct this information!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
motor was great and ran cool with tons of torque....for about 20 minutes. the shaft separated from the rotor and the motor is now useless to me. some people say you can glue the rotor to the shaft with green loctite or JB weld, but i ended up getting a better quality motor.



so, if you add some form of extra glue to the rotor and shaft, this motor is great. my other KB motor ran for 3 hours (non-cont.) before it's shaft separated from the rotor.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
este na minha opiniao o melhor dos motores kb45 para ser usado em cascos de ate 1mt.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hi, KB45 in Emaxx !!!

what's your pinion & spur gears on Emaxx?

6s lipo is ok without hot temp on the motor?

I hope to use this ...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I'm very happy with this motor, it does produce massive torque at a bargain price. I measured 1490kV under no load.

I am using it in an Emaxx at 6S to keep the current down. I've recorded peak power usage around 1500W which is more than enough for the heavy truck.

Its not too quick to heat up but the the temp does continue to climb so I've added two stretched 540 heatsinks and a 50mm fan (did not want to drill endbell holes to let dirt in) and now I can keep it below 70C after 10min.

I believe the magnets don't like to go above 80C so temps need to be watched carefully.

The rotor balance isn't that great, vibration can be felt when free revving the motor. And the bearings don't seem that smooth either. But so far the KB45 has held up well to the abuses of offroad driving and thats all I want it to do.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
great motor for the money, real strong, only thing missing is ventilation holes in the front and the back, as it tends to run a little hot.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great Motor for this price, You can use different prop for the best performance.

It give me 3 horse power just say bye bye to the gas engine :)



FIVE STAR !!!
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Štítky produktu

Štítky oddělujte mezerou. Víceslovné uzavřete v apostrofech (').