New Items Novinky Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

KD 63-24L Brushless Outrunner 193Kv

KD 63-24L Brushless Outrunner 193Kv

Shipped From:
  • Global
Discontinued Product

Please continue searching for a similar product.
SKU:
KDA63-24L
WANT FREE SHIPPING? Click here to find out more!

KA63-24L
Constant: 193Kv
Battery: 10Cell Lipo
Operating Current: 15-38A
Peak Current: 55A(15sec)
Suggested Prop Size: 23x11
Shaft Size: 8.0mm x 24mm
Motor Dimensions: 63mm x 66mm    
Weight: 650g

  • SKU KDA63-24L
  • Brand -
  • Hmotnost 680.0000
  • Délka 0.00
  • Packaging Width 0.00
  • Výška 0.00
  • Kv (rpm / v) 193.00
  • Maximální proudy (A) 55.00
  • Odpor ( mh) 0.00
  • Maximální napětí ( V) 37.00
  • Výkon ( W ) 0.00
  • Hřídel A ( mm ) 8.00
  • Délka B ( mm ) 66.00
  • Průměr C ( mm ) 63.00
  • Může Délka D ( mm ) 37.00
  • Celková délka E ( mm ) 90.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Have too give it a 3 rating due too magnets coming loose although i have had this motor in my 60 size hanger 9 hellcat spinnin a 16x10 3bladed MAS prop for about 6months put a fresh KD motor in as i have 3 new ones waiting too play!! but this one only lasted 3 flights
black stator & magnet delamination was running on 8s previous motor until i looked at the stats on here so i went too 10s 35c 3000x2 put my 3rd one in did a watt test & found on 10s fresh pack 42volts but here it says 37?? how does that work its a 10s pack? anyway powered up to 3/4 throttle 3456watts 75amps omg way over what the recomendation is lol curiosity killed my 3rd motor at the field today as i had too see how it flew very impressed for that one & only flight gps read 168kph killed it within 5miutes flying long trail of white smoke looked awsome for a warbird perfect landing but went home lickin my wounds $75 later :( missus not happy as im spending again on here!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Have too give it a 3 rating due too magnets coming loose although i have had this motor in my 60 size hanger 9 hellcat spinnin a 16x10 3bladed MAS prop for about 6months put a fresh KD motor in as i have 3 new ones waiting too play!! but this one only lasted 3 flights
black stator & magnet delamination was running on 8s previous motor until i looked at the stats on here so i went too 10s 35c 3000x2 put my 3rd one in did a watt test & found on 10s fresh pack 42volts but here it says 37?? how does that work its a 10s pack? anyway powered up to 3/4 throttle 3456watts 75amps omg way over what the recomendation is lol curiosity killed my 3rd motor at the field today as i had too see how it flew very impressed for that one & only flight gps read 168kph killed it within 5miutes flying long trail of white smoke looked awsome for a warbird perfect landing but went home lickin my wounds $75 later :( missus not happy as im spending again on here!!

a very powerful motor i flew a 2.5 meters wing span dehavilland beaver with 10 cells 5000 lipo



http://www.youtube.com/watch?v=5QvrOskZc2g

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

a very powerful motor i flew a 2.5 meters wing span dehavilland beaver with 10 cells 5000 lipo



http://www.youtube.com/watch?v=5QvrOskZc2g

I use this motor on a Pilot-1 1/4 scale Piper PA-12 and it flys on just over 1/4 throttle with a 20X10 wooden prop on 8 Lipo cells. Great pefromance, more than what is needed.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use this motor on a Pilot-1 1/4 scale Piper PA-12 and it flys on just over 1/4 throttle with a 20X10 wooden prop on 8 Lipo cells. Great pefromance, more than what is needed.

Received this motor this week for use in my F3A. Looks good, but...

Bench tested with 5000mAh 10S Zippy Battery and after few seconds the shaft is "runnig out"...

After repairing - first test in flight and after approx. 1 min. few magnets were loose...

I try to reglue it and I hope, I will can finally to use this "DIY motor"...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Received this motor this week for use in my F3A. Looks good, but...

Bench tested with 5000mAh 10S Zippy Battery and after few seconds the shaft is "runnig out"...

After repairing - first test in flight and after approx. 1 min. few magnets were loose...

I try to reglue it and I hope, I will can finally to use this "DIY motor"...

Received new well built motor (no more unbalance and perfect bell) so customer service is ok !

Bench tested with 5000mAh Turnigy on 10S and after 10 seconds 6 out of the 14 magnets were loose...

Reglued ALL the magnets with epoxy and retested motor, seems to perform well now. Still haven't had time to post numbers but these will follow.

So far I'm happy with this motor but you got to reglue the magnets. We'll see how it holds in future tests..

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Received new well built motor (no more unbalance and perfect bell) so customer service is ok !

Bench tested with 5000mAh Turnigy on 10S and after 10 seconds 6 out of the 14 magnets were loose...

Reglued ALL the magnets with epoxy and retested motor, seems to perform well now. Still haven't had time to post numbers but these will follow.

So far I'm happy with this motor but you got to reglue the magnets. We'll see how it holds in future tests..

Bought this motor couple of months ago. Bell is badly made (not circular and thus not in balance !). The 63-20L that I bought afterwards is perfect so do a little effort in quality control HK !!!!!



Bench tested it with an Sentilon 100A and APC 21/14 on 10S and has awesome power, just scary !



Warning : do not mount prop to the bell because the metal clip will come loose. Will do some more endurance bench tests with numbers later.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought this motor couple of months ago. Bell is badly made (not circular and thus not in balance !). The 63-20L that I bought afterwards is perfect so do a little effort in quality control HK !!!!!



Bench tested it with an Sentilon 100A and APC 21/14 on 10S and has awesome power, just scary !



Warning : do not mount prop to the bell because the metal clip will come loose. Will do some more endurance bench tests with numbers later.

sehr stabiler motor!

an einer 22x12 APC-E satte leistung in allen lebenslagen. gnstiger motor fr F3A-anwendungen.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

sehr stabiler motor!

an einer 22x12 APC-E satte leistung in allen lebenslagen. gnstiger motor fr F3A-anwendungen.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking