New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

Quanum MADCOW 3D Multirotor Flight Controller

Quanum MADCOW 3D Multirotor Flight Controller

Discontinued Product

Please continue searching for a similar product.
SKU:
9736000001-0
WANT FREE SHIPPING? Click here to find out more!

Quanum MADCOW 3D Multirotor Flight Controller

The Quanum MADCOW is an exciting 3D Flight Controller specifically designed for 3D multirotor flight and racing. 3D flight is the next generation of multirotor flying to add to your repertoire. The MADCOW FC makes it so easy to use and has superb performance. Utilizing a high speed STM32 Processor.

Get all your old tricks and perform them inverted. 3D is the way to push the flight envelope to even more extremes.

The Madcow flight controller comes preset with five flight modes.
1. Tipping Mode: (Acro mode) 0-100% of the throttle range corresponds to normal motor rotation only. In this mode the multirotor will not keep level balance automatically while roll and pitch are centered. Also known as “acro” or “manual” mode.
2. Grilling mode: (Acro Stabilized mode) 0% - 100% of the throttle range corresponds to normal motor rotation only. In this mode the multi-rotor will maintain level balance automatically while roll and pitch are centered. The multi-rotor will still flip and roll and the angle of tilt is not limited. This is often called “horizon” or “ratititude” mode but is not capable of inverted flight.
3. Veal mode: (Stabilized mode) 0 – 100% of the throttle range corresponds to normal motor rotation only. In this mode the multi-rotor will maintain level balance automatically while roll and pitch are centered. The multi-rotor will not flip and roll and the angel of tilt is limited. (This mode can function as a rescue mode, if you are flying 3D and lose orientation. Switching to this mode will quickly roll the mutirotor back to normal flight and keep balance)
4. Slaughterhouse Mode (3D Mode) 0% - 50% of the throttle range corresponds to reversed motor rotation, 50% - 100% range of the throttle corresponds to normal rotation. In this mode the multirotor will not keep level balance automatically while roll and pitch are centered. Also known as “acro” or “manual” mode but with the added reversing of motors for inverted flight.
5. Madcow mode: (3D stabilized mode) 0% - 50% of the throttle range corresponds to reversed motor rotation, 50% - 100% range of the throttle corresponds to normal rotation. In this mode the multi-rotor will maintain level balance automatically while roll and pitch are centered. This is often called “horizon” or “ratittude” mode but with added reversing of motors for inverted flight.

MADCOW is an excellent flight controller to explore the world of 3D flight.

Features:
• 3D Flight Controller
• Easy to use
• Superb performance
• High Speed STM32 F302 CCT6 Processor

Specs:
Processor: STM32 F302 CCT6
Core: Cortex – M4 with FPU
Size: 38.5x26.5x12.5mm (without cables)
Weight: 8.5g (without cables)

Includes:
1 x Quanum MADCOW 3D flight controller
2 x Mounting stickers
1 x USB Cable
1 x Cable set

Note: Default setting is for the Quanum Chaotic 3D Quad with active braking and Oneshot125 ESC.

  • SKU 9736000001-0
  • Brand Quanum
  • Kapacita ( mAh ) -
  • Hmotnost 76.0000
  • Délka 102.00
  • Packaging Width 40.00
  • Výška 85.00
  • Quanum MADCOW 3D Multirotor Flight Controller
  • How to set up your MCFC
  • Madcow GUI
  • Flying the MCFC
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

typical hobby king. i bought this when it first came out wanting to put it onto a trickster as advertised. but as always empty promises here on hobbyking as it can't support tricksters even while 3d mode is turned off. also the software doesn't even work on mac while in the files they have stated "mac version coming soon" well its been over 6 months now and still no update and no support for mac books and tricksters. its a shame as the board itself is fantastic and built very well.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

typical hobby king. i bought this when it first came out wanting to put it onto a trickster as advertised. but as always empty promises here on hobbyking as it can't support tricksters even while 3d mode is turned off. also the software doesn't even work on mac while in the files they have stated "mac version coming soon" well its been over 6 months now and still no update and no support for mac books and tricksters. its a shame as the board itself is fantastic and built very well.

Just got a second one. Tried itout with Orange SBUS Rx this time.
You need to press RC calibration button during setup for the FC to scan the ports and recognise the type of rx connected. Rotation speeds 360 pitch/roll, 300 yaw.
Gain 100 basic and 50 attitude is a good starting point for 250-450 quad.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just got a second one. Tried itout with Orange SBUS Rx this time.
You need to press RC calibration button during setup for the FC to scan the ports and recognise the type of rx connected. Rotation speeds 360 pitch/roll, 300 yaw.
Gain 100 basic and 50 attitude is a good starting point for 250-450 quad.

Yes, this is my 2nd review and after realizing the error was 100pcnt MINE I'm admitting it and giving this amazing thing the review it deserves.
1 - It fits in the smallest of copters and looks awesome.
2 - It performs better than any fc I've used (CC3D, NAZE). It has rock solid stabilization, and very precise movement.
3 - Its ridiculously easy to program once you download the software from the files tab.
4 - It's dirt cheap and outperforms fc's that are 3 times the price.

Buy it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Yes, this is my 2nd review and after realizing the error was 100pcnt MINE I'm admitting it and giving this amazing thing the review it deserves.
1 - It fits in the smallest of copters and looks awesome.
2 - It performs better than any fc I've used (CC3D, NAZE). It has rock solid stabilization, and very precise movement.
3 - Its ridiculously easy to program once you download the software from the files tab.
4 - It's dirt cheap and outperforms fc's that are 3 times the price.

Buy it.

Absolutely awesome! Everybody must have one. Very easy to setup and works great.
I was flipping my quad around in no time. Start with 100 basic and 50 attitude gain.
Works great with SymonK flashed esc's even without OneShot but I recommend PWM (active braking) on. Wow Hobby King!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Absolutely awesome! Everybody must have one. Very easy to setup and works great.
I was flipping my quad around in no time. Start with 100 basic and 50 attitude gain.
Works great with SymonK flashed esc's even without OneShot but I recommend PWM (active braking) on. Wow Hobby King!

Does the job but not much else. Decent auto level but not many customization features.

Hobbyking sent me a defective board which the gyro "zero point" constantly changes on even after calibration. I will be contacting Hobbyking about this problem soon. I'm not the only one with this problem.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Does the job but not much else. Decent auto level but not many customization features.

Hobbyking sent me a defective board which the gyro "zero point" constantly changes on even after calibration. I will be contacting Hobbyking about this problem soon. I'm not the only one with this problem.

Started out great on my sk450 and by 3rd flight quad went crazy in the air.I've re-calibrated reset and went over this thing repeatedly it will not hold calibration Gyros are defective I have a video you can watch to see using the Mad Cow software how the Gyros think it's still moving even though it's sitting still. hobbyking did replace it for me hope this one is better...

https://www.youtube.com/watch?v=qPI6fxMgnIU

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Started out great on my sk450 and by 3rd flight quad went crazy in the air.I've re-calibrated reset and went over this thing repeatedly it will not hold calibration Gyros are defective I have a video you can watch to see using the Mad Cow software how the Gyros think it's still moving even though it's sitting still. hobbyking did replace it for me hope this one is better...

https://www.youtube.com/watch?v=qPI6fxMgnIU

First impression was pretty bad. I've never received a faulty item before, I guess I'm lucky, But I believe this thing is defective. It always responds differently in the calibration set-up screen. And it will not control my motors correctly, spins them at random and will not un-arm during flight tests, so it just keeps spinning the motors at random. I've spent a couple hours trying to fine tune it... no luck. I will change my review if the exchange works.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

First impression was pretty bad. I've never received a faulty item before, I guess I'm lucky, But I believe this thing is defective. It always responds differently in the calibration set-up screen. And it will not control my motors correctly, spins them at random and will not un-arm during flight tests, so it just keeps spinning the motors at random. I've spent a couple hours trying to fine tune it... no luck. I will change my review if the exchange works.

I received this FC in May 2016. Connected everything and my transmitter is communicating with the board. I just can't the board to arm the motors.On the motor tab page when i press motor test nothing is hapenning. The save button also does does the same thing. I received a replacement from HK but it is still doing the same thing. Anybody has a solution ?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I received this FC in May 2016. Connected everything and my transmitter is communicating with the board. I just can't the board to arm the motors.On the motor tab page when i press motor test nothing is hapenning. The save button also does does the same thing. I received a replacement from HK but it is still doing the same thing. Anybody has a solution ?

A great FC for beginners or experts. The GUI setup software is easy and intuitive and allows the option for basic or advanced settings. Out of the box the default, simple settings flew stable. 3d can be turned off to get a feel for the PIDs before trying inverted flight. I will continue tuning as I prefer a more crisp feeling response, however I haven't tried the current settings with 3d flight. One area of improvement - I would really like to see this fc include a barometer for altitude hold while inverted (version 2 perhaps?).

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A great FC for beginners or experts. The GUI setup software is easy and intuitive and allows the option for basic or advanced settings. Out of the box the default, simple settings flew stable. 3d can be turned off to get a feel for the PIDs before trying inverted flight. I will continue tuning as I prefer a more crisp feeling response, however I haven't tried the current settings with 3d flight. One area of improvement - I would really like to see this fc include a barometer for altitude hold while inverted (version 2 perhaps?).

This is a great board....... easy to set up in the GUI.... flies great on my 250. The only down side is that the instructions dont show how the OSD is to be set up but I guess that will come sometime... Going to purchase another couple just in case..... for set up vids and info you can check out my youtube channel ..... moochasas .... here to help others.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a great board....... easy to set up in the GUI.... flies great on my 250. The only down side is that the instructions dont show how the OSD is to be set up but I guess that will come sometime... Going to purchase another couple just in case..... for set up vids and info you can check out my youtube channel ..... moochasas .... here to help others.

  1. 1
  2. 2
Customer files
MadCow Manual Download [5818]
Madcow 3D assistant software Download [19498]
Madcow Manual (updated for OSD) Download [6777]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!