Innovators in multicopter technology, LDPOWER, have released their long awaited series of premium multicopter power systems.
Coupling motor, speed controller and propeller in perfect combination, these systems have been stringently tested to ensure outstanding performance, reliability and durability.
The series ranges from the powerful D200 which is suitable for quads up to 500 size, right through to their big D1400 which can be used for quads weighing up to 4.5Kg! So whatever the size quad/multi you are building LDPOWER has the power system for you.
While the smaller D200, D300 and D310 systems include plastic props to save on weight, high quality carbon fiber props have been included with the larger D600 through to D1400 systems in line with their size and power.
LDPOWER systems are premium quality and will definitely answer the need of serious builders and flyers of quads/multis everywhere.
• Designed to mount on wide range of frames
• Rigorous testing to ensure best motor, ESC and prop combination
• Highest quality engineering and components
Motor Type: MT2206- 1900kv (x4)
Prop Size and Type: 6 x 3 inch Plastic (x4)
ESC: 15A (x4)
Kapacita ( mAh )
Hmotnost ( g )
I have the several LDpower 1806-2300kv sets, a multistar 2206-2300kv set (red), 1 set mini monsters and with my last order 3 of these sets. They are on HK 250 color frames, KK FCs, 5040 bull nose props, 1300-2200 3s batteries and pull in the mid to high 30s for max amps, hover is about 10amps. They run very close to the same amps as the 1806s but are much faster at recovering and acceleration. As the mini monsters have more power this set in my opinion is the best bang for the buck. You can run from light batteries for quick fast flights to big batteries for long flights and the price is incredible. Highly recommend this set.Propeller adapter came with wrong thread pitch.
Speed controller is without BEC.
But this set was packed well.
Quality also good.ATTENZIONE I DATI NON SONO UGUALI A QUELLI DEL MOTORE NON VANNO BENE CAUTION THE BOLTS OF PROPELLERS NOT THE SAME IS NOT screwCouldn't upload my video so just put this on the back of youtube /watch?v=lNGP-ee8aSw
Its been a couple of months now and the motors & ESC's are still going well.the nuts not fit in screws! two are screwed counterclockwise and two clockwise but non a correct fit......I damaged the screws!!
I thought I would take a gamble on this power combo for my RoboCat. I must say I am quite please with the quality and power of this combo. I would recommend this product.Worked very well for me made a video of the final product absolutely not worries putting together my first quad-copter used:
LD Power D250-2
AfroFlight Naze32 FunFly
H-King Colour 250 Frame (awesome cheap and strong)
https://www.youtube.com/watch?v=lNGP-ee8aSwUsed these to build a Q330 frame, Running a 3S 2200mAh Turnigy pack and Naze32 FC. The ESC's are quite small so they shouldn't cause any problems when trying to find room in hollowed out arms. The screws that come with it are a bit short if you're fitting them to a thicker frame arm (4mm carbon, Or most injection molded arms), But luckily, as well as the little M2 screw holes, They have a pair of well spaced M3 holes that should be fine for most frame's.
I've only just finished the Q330 build and took it out for it's maiden flight today....... It's a fr**in' Rocket ship !!!!! Ran 3 packs through it, The Motors ad ESC's were barely warm, and I'm still grinning. :). On the 6x4.5" bull nose props I bought for the build it's got an impressive amount of power. During testing I was taking it up to about 30 feet and closing the throttle to let it drop like a rock, Then whacking it back up to full throttle. It stops and start climbing (Like a homesick angel) again within about 2 foot.
At this price I'm almost tempted to get another set for the future rebuild of my FPV250. On a lighter frame with a smaller battery pack it would be an evil toy ! :)
This is a nicely matched setup. It has loads of power and i have fitted this equipment to 2 250 size frames. A Dynam 250 and the HK color 250. Both performed well and seemed to have plenty of speed. The esc's are opto witch means you will need the UBEC. I used the HK Micro UBEC 3A/5V.Been using for a week now on my first 250 size quad and can't complain, works great straight out of the box with plenty of power. Props didn't last long not very strong