Linkage Stopper D2.1mm 1set
This item has been changed to a circlip (c-clip) design. We will update the photo as soon as possible.
Hmotnost ( g )
I bought some of these everything is geat except the E-clip that holds it in. They are very hard to clip[ on because they are so hard. The ones with a nut are the best to buy. I found that I can take a small strand of wire and twist it around the grove and it works much better than the e-clip. Those e clips are a painExelente stopper, as linkagens ficam perfeitas, sem fluter nenhum, pode-se usar varetas de fibra de vidro para os links, o que, alem de facilitar o trabalho o deixa mais bonito.Gostei, para servos de 9 gramas tem que alargar um pouco os furos dos braos dos mesmos, pode-se usar fibra de vidro para fazer os links, ficam perfeitos.It is a good linkage stopper but it is really hard to get the clip on. You will need a lot of patience, still hands and good needle-nose pliers to set the clip. Else it is a well made and good quality. Give only 3 stars becouse of the dificulty of getting the clip on.As said in previous review, make sure you get the threaded version, these are worthless, it is nearly impossible to get the circlip on, I have been trying now for over an hour.El precio es lo mejor, y da el mismo resultado que los que aqu en Espaa valen cuatro veces ms, y los gastos de envos son menores que incluso la peninsula.these linkage stoppers are cheap and reliable. Furthermore, quality is good ! use it almost on all my planes.this linkage stopper is great, quality better than GWS !super et pas cher !
rapide grace au clip, mais assez dur a demonter
attention l'epaisseur du palonier de servo,
trop large, a ne passe pas, trop fin y'a du jeu!
mont sur des HXT 500 et 900 a passe nickel !I am giving 5 stars to the THREADED version of this linkage stopper and 1 star to the circlip version. HK has apparently changed the design and kept the same part number. I followed the link from my last order (threaded) in September and the design has since changed to circlip. Most of the positive reviews are for the threaded version.
The threaded version is great since you can adjust the tightness of the fit with the supplied nut and washer. A dab of threadlock seals the deal. The shaft is 1.9mm and a number 49 bit will drill out a perfect hole so that the stopper won't wobble in the servo arm or control horn when snugged up with the nut.
The circlip design is worthless. You can't adjust for servo arms or horns of different thickness so the linkage will wobble in the hole. The clip is tiny and almost impossible to attach. Many of the shafts on the stopper don't have a consistent groove for the clip.
HK please please please bring back the threaded version! These are worthless until you do.