The micro D-17 comes 80% pre-built and includes a C10 2900kv motor and all the hardware such as control rods, horns, landing gear and propeller to complete the model.
This cute little plane will require two 2.5g servos, a 5A esc and a 500mah 2S lipo and your own transmitter and receiver (Tx/Rx) to be flight-ready in one evening.
Flying weight: 95-110g
Motor: C10 2900kv Brushless outrunner (Included)
ESC: 5A/2S (Required)
Prop: 3 inch (Included)
Servos: 2 x 2.5g (Required)
Battery: 7.4V 2S 500mah Lipo (Required)
5A/2S Brushless ESC
2 x 2.5g Servos
Your own TX & RX
7.4V 2S 500mah Lipo
Hmotnost ( g )
very weak plane the foam is very fragile ,the motor is small and not very powerful ,the stickers will not stay on ...it looks like they have stuck then 3 hours later they are curled up :( ...the double sided tape on the wings doesnt stick the plane looks like a damage repair before its even flown with bits of paint missing and cracks all over .....pass on this its not worth the money ...None of the stickers stick, and this is one ugly bird wearing nothing but it's baby blue. Foam support in center of fuse was broken when I recieved it. Slots for control arms will need to be enlarged as they are not as wide as the carbon fiber rod with heat shrink on it. Motor mount fell off lifting plane out of box (held on with what looks like hot glue) All in all dissapointed with the product.