Mini black T Connector pack (10 Pairs)
Base Dimensions: 5mm x 8mm
Contact Dimension: 3mm x 5mm x 1mmRating: 10amps continuous
Hmotnost ( g )
Good little connector, only problem is gripping them to pull apart.great little connecters.Good for saving space in my 250 racer.
Would not recommend for use as battery connectionGreat little connectors! Fit together snugly - not too tight and not loose at all. These can take almost twice the amps they are rated for!After a couple brow-outs and crashes on my 'sacrificial test foamy' I discovered that these connectors loose contact. to compensate for this I had to bend the tongues a couple degrees away from the spring side. make sure you wiggle the connection a couple times and watch out for brown-outs, like the ESC resetting. I was able to reproduce this issue on 3 different pairs (all I have in use!) and assume that the tolerances are to loose on the whole batch.
Very nice mini size t-connectors. Quality seems fine and price is great. I bought these for connecting some lights and to replace jst connectors. I don't mind soldering so these should work great. Recommend!Cute little deans type connector to save weight on a micro quad. They go together really well and enough spare to make an adaptor for a charger.ok plusplusplus okplusplusplusplusplus ok plusplusplusplus plusplus plusI pleased to say that these seem to be manufactured well! The casting is fine. They index fine. There is however one problem. Notice in the picture above that the metal contact (female side) extends all the way out to the end of the plastic. This design oversight will allow inadvertent cross polarity and possible component damage. The genuine Deans and HK Version has a recessed contact preventing cross polarity. BE CAREFUL NOT TO FRY YOUR BITS! A simple fix may be to use pliers to pull the contact out of the plastic a little bit. Please consider fixing this HK. Fair winds and clear skies.Some decent little connectors. I use them instead of JST plugs. Though the plastic part is kinda weak so you don't want to heat them too much when soldering, I would highly recommend putting a pair together when soldering, that helps to spread the heat around.