Registrovat

Product Finder

Nastavení

Useful links

 
[["US","AU","GB","DE"]]
Registrovat
Shipped From:
  • Global

Mini Ublox Neo-6M GPS for CC3D & Revolution Flight Controller w/Built-in Compass

Mini Ublox Neo-6M GPS for CC3D & Revolution Flight Controller w/Built-in ...

QTY:

Now save Uložit 0,00 € 0,00 €

20,82 €
Stock:
Váha:
36 g
SKU:
571000066-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Popis
produktu

The latest generation of high precision Ublox Neo-6M GPS receiver incorporates a digital compass and features active circuitry for the ceramic patch antenna, rechargeable backup battery for hot starts, and flash memory for configuration storage.

The Ublox Neo-6M GPS comes pre-configured for use with CC3D & Revolution Flight Controllers for easy set up while the folding pedestal mount provides a handy of mounting the compass away from sources of interference on you model.

Features:
• Fast satellite acquisition (10s to find 6 satellite fixes in the open)
• High precision (2.5m)
• Built-in compass, refresh rate up to 10GHz
• Inbuilt RTC Crystal
• Flash memory
• Folding antenna base
• Low noise
• Active and passive antennas supported
• SAW band pass filter
• Data logger for position, velocity & time

Specs:
Receiver Type: 50 channel Ublox M8 engine
Input voltage: 2.7 ~ 3.6V
Backup power: 1.4 V – 3.6V 22 µA
Supports: NMEA, UBX binary, RTCM
Position Accuracy: 2.5m
Acquisition rate: Cold 27 secs, Aided 3 secs Re-acquisition 1 sec
Tracking & Nav sensitivity: -167 dBm
Cold Starts: -148 dBm
Hot Starts: -156 dBm
Default Baud Rate: 38400
Power Consumption: 111mA @ 3.0V (33mA @ 3.0V in power save mode)
Operating Temperature: -40 ~ 85°C
Dimensions: 27.5 Ø x 7mm
Weight: 38g

Included:
NEO-M8N GPS module w/compass
Folding GPS mount and bracket

Full configurations instructions can be found in the OpenPilot manual:

http://opwiki.readthedocs.org/en/latest/user_manual/index.html

Product
Specifications

Další informace

  • SKU:
    571000066-0
  • Brand:
    Ne
  • Hmotnost ( g )
    36.00
  • Délka
    120.00
  • Width:
    20.00
  • Výška:
    80.00
Community
Discussions
Rate&
Review

Napište vlastní recenzi

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
This is actually funny, the GPS has a MAG (Compass) but is not wired or connected! In order to use this MAG you will need to open the GPS module, solder 2 wires and connect them to the Flexi Port with I2C protocol. The GPS itself is good for its price.
Quality
Value
Overall
Quality
Value
Overall
have not used this yet but all the parts look great and easy to install,
Quality
Value
Overall
Quality
Value
Overall
Decent GPS module for use with Revolution / LibrePilot. Only uses GPS satellites. It does have a built-in compass, but is not wired up. In order to use the compass, you have to open the unit up and add the other two (SCL and SDA) wires to the 6-position connector. The compass talks over I2C and is powered by the same power / gnd connections that already exist.

The latest BETA build of LibrePilot will talk to the compass over the Flexi port only on a Revolution board, just be sure that you are powering via flight battery and not USB cable as the USB cable doesn't send power to the Main / Flexi ports.
Quality
Value
Overall
Quality
Value
Overall
Went with CC3D revo, GPS stand is neat too
Quality
Value
Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
naze32_rev3.pdf download now [0.99Mb]

Štítky produktu

Štítky oddělujte mezerou. Víceslovné uzavřete v apostrofech (').