This handy cable will connect to the USB port of your Mobius camera, allowing it to be used as your primary video feed. The slim 90deg PCB design and Ultra flexible silicon wires still allow for gimbal and tight fitment use. The cable also provides a charging option for your Mobius camera system keeping your battery topped up and making sure you never miss any of the action! The 4 wire Adapter only needs 2 wires Video and ground to stream live video out to your Video transmitter. You still have the option of Audio and power/charge on the other two wires if needed. The single pin Header allows this cable to be plugged into just about any Video TX by swapping the order to matching the pin out of your TX.
Connector: USB to Single pin (Suit most Video Transmitter such as Skyzone, Boscam & Fatshark)
Cable length: 230mm
Red: 5V DC
Charging is optional, for Video out only simply connect GND & Video only (Black & Yellow wires)
** NOTE: DO NOT exceed 5v DC to the Mobius camera
Hmotnost ( g )
Looking for a neat FPV system.. this cable is all you need for your mobius.
Excellent value for the money. Thanks Hobbyking.What a great product, really, sincerely, a great product. As they age, the batteries in the Mobius lose capacity, my worse offender only lasting 15 mins on a charge. Being able to power the camera from your BEC also allows you to setup auto power-on and off, saving precious MB's on your SD card in the process. The 90 degree connector is simply the best part though, the first I've seen like it, and a first solution that'll really work on a 250-sized quad.
While all of my racing frames use the power leads on this cable, I also have a DeadCat Pro with Mobius Gimbal that also uses the video lines, fed through a 2-way video switch controlled by my Taranis. I wouldn't ever use a Mobius as my primary flight camera, but on a camera ship setting up a shot in GPS mode is easier this way.
Another plus is the cable is not only compatible with Mobius cameras. I have recently purchased 2 Firefly Q6 4K cameras, which charge when these are connected!
My advice to Mobius and FireFly Q6 owners is to buy two of these with every frame you purchase.GREAT DEAL! HAD TO GET TO AT LEAST TRY FOR THE PRICE YOU CANT GO WRONGWell what more can I say it all works as it should a little bit Laggy on the mobius but not using for racing so that's fine mounted on a hex copter with gimbalworks as it should on my mobius and saves me having to have 2 seperate cameras (and added weight) on my micro FPV applicationsDon't get this mixed up with your GoPro cable, it wont work. Quality cable here, light weight, flexible with strain relief at the USB end. Worth it.very small fpv cable for your mobius, it works wellWorks as it should, cords seem to be of good quality, works fine for what I need it for.This USB to AV Out FPV cable with Charging is very handy update for every mobius user. Quality seems fine and price is very reasonable. Recommend!Allows me to use my mobius on various devices, despite output voltage. The wire is very supple, only concern might be the usb connection, but some hot glue or heat shrink could alleviate that concern.