New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

Multistar Elite 2306-2150KV MINI MONSTER Quad Racing Motor (Set Of 4 CW/CCW)

Multistar Elite 2306-2150KV MINI MONSTER Quad Racing Motor (Set Of 4 CW/CCW)

Discontinued Product

Please continue searching for a similar product.
SKU:
9536000017-0
WANT FREE SHIPPING? Click here to find out more!

Look no further for the ultimate in durability and power in mini quad motors. The new Multistar Elite 2306 2150KV MINI MONSTER is here

The Elite 2306~2150kv is dubbed the MINI MONSTER, producing nearly 1000g of thrust on a 6inch prop and 4s (each). The Monster is like no other mini motor on the market it was built around a 4mm main shaft… that’s correct 4mm, and massive 11mm EZO japan bearings! The thicker bell added efficiency and durability. The single wire wound stator can deal with the high amps and heat much better the multi-strand. The replaceable 5mm prop adapter increases its survivability in a hard hitting crash. The Mini Monster with the 4mm main shaft with 11mm bearings, thick bell, single wire wound makes this the most durable MINI quad motor around.

Multistar Elite motors are more than a fancy name and new dark green color.. Built using the highest quality components from Japan bearings, N45SH magnets, .2mm laminations, 180deg oxygen free copper wire, .005g balancing, perfect wind laid down and 100% QC, and then the design of each motor are also evaluated for their type application and everything from their mounting, to the prop type adapters are taken into consideration. The Elite motors are truly works of art

Multistar Elite is unmatched in quality and value, and the performance speaks for its self.

Features:
• 4mm main shaft with 11mm bearings
• EZO Japan Bearings
• N45SH Magnets
• 0.2mm Laminations
• 180deg oxygen free single strand Copper wire
• 0.005g Or better balancing
• Perfect lay down windings
• 100% QC
• Replaceable CW prop adapter

Specs:
KV(RPM/V): 2150
Lipo cells: 2~4s
Max Amps: 20A
Dimensions(Dia.xL): 23 x 6mm
Motor Shaft: 4mm (5mm prop shaft)
Prop shaft: 5mm or Direct mount with 9mm center to center 
Weight: 37.5g
Bolt hole spacing: 16mm * 19mm
Connectors: 2mm bullet

Includes:
4 x Multistar 2306 - 2150KV motors and prop adapters.

  • SKU 9536000017-0
  • Brand MultiStar
  • Hmotnost 364.0000
  • Délka 140.00
  • Width 40.00
  • Výška 120.00
  • Kv (rpm / v) 2150.00
  • Maximální proudy (A) 20.00
  • Odpor ( mh) 0.00
  • Maximální napětí ( V) 0.00
  • Výkon ( W ) -
  • Hřídel A ( mm ) 3.00
  • Délka B ( mm ) 0.00
  • Průměr C ( mm ) 0.00
  • Může Délka D ( mm ) 0.00
  • Celková délka E ( mm ) 0.00
  • Multistar Elite 'MINI MONSTER' Quad Racing Motor
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Got these motors for my latest 250 racer build. They seem nice thus far. One motor was not threaded at the base. I had to tap it. The other 3 were fine. Im using the diatone carbon 250 frame and had to bore out the mounting holes so the shaft clips would clear. Havent tried them on 4s yet but I will. Overall impression is QC was a bit weak on this set but lack of threads on 1 isnt a deal breaker. The thrust G rating is what made me decide on these over the scorpions

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Got these motors for my latest 250 racer build. They seem nice thus far. One motor was not threaded at the base. I had to tap it. The other 3 were fine. Im using the diatone carbon 250 frame and had to bore out the mounting holes so the shaft clips would clear. Havent tried them on 4s yet but I will. Overall impression is QC was a bit weak on this set but lack of threads on 1 isnt a deal breaker. The thrust G rating is what made me decide on these over the scorpions

Great Quality Product, , , Wish it came with one more of each bolt. Or at the least a list of each bolt size so i can reorder after they fall out . Also would like to see soder tabs for the wires. those winding wires are thin and easy to break.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great Quality Product, , , Wish it came with one more of each bolt. Or at the least a list of each bolt size so i can reorder after they fall out . Also would like to see soder tabs for the wires. those winding wires are thin and easy to break.

Great motors with awesome power! Really nice size and plenty of power from a sturdy design. There are two things I'd like to see improvements in, though, the first being the end of the windings which hang down on the underside of the motor: Tuck those in, will you? Secondly, the price is way off. Get real. But overall, awesome power.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great motors with awesome power! Really nice size and plenty of power from a sturdy design. There are two things I'd like to see improvements in, though, the first being the end of the windings which hang down on the underside of the motor: Tuck those in, will you? Secondly, the price is way off. Get real. But overall, awesome power.

These motors put a big smile on my face everytime I fly them! I equipped my 2nd RoboCat270 also now with these motors. First runs on 3s, 2nd on 4s. I love these motors, they have the punch you want, they are robust, they dont ask, they simply pull through. There is significantly more power than from any 2204/5. Biggest punch is on 6045 bi-blades with some 5 G's (!) vertical acc of my 735gr Robo on 4s1800! If I had some, they probably would easily drive triblades of the same size also. But not at 20Amps max anymore, hehe. I only have 5045 DAL V2. But, just sweet! Great combo!

These motors run phantastic on 3s with 6045 props. There is absolutely power when you need it. On 4s they become a beast using the same props. Scaling down to 5045 triblades helps taming the power but increase much the "free-fly-effekt" because of their smaller resulting surface compared to the 6ers.

Temperature: even on 4s with 6045 they do not get warm at all, temperature management resp efficiency is obviously very good.

MultiStar, please keep producing these motors!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These motors put a big smile on my face everytime I fly them! I equipped my 2nd RoboCat270 also now with these motors. First runs on 3s, 2nd on 4s. I love these motors, they have the punch you want, they are robust, they dont ask, they simply pull through. There is significantly more power than from any 2204/5. Biggest punch is on 6045 bi-blades with some 5 G's (!) vertical acc of my 735gr Robo on 4s1800! If I had some, they probably would easily drive triblades of the same size also. But not at 20Amps max anymore, hehe. I only have 5045 DAL V2. But, just sweet! Great combo!

These motors run phantastic on 3s with 6045 props. There is absolutely power when you need it. On 4s they become a beast using the same props. Scaling down to 5045 triblades helps taming the power but increase much the "free-fly-effekt" because of their smaller resulting surface compared to the 6ers.

Temperature: even on 4s with 6045 they do not get warm at all, temperature management resp efficiency is obviously very good.

MultiStar, please keep producing these motors!

Purchased 3weeks ago. Missing a prop adaptor, two weeks into the RMA still getting stuffed around, save your money and buy something else !!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Purchased 3weeks ago. Missing a prop adaptor, two weeks into the RMA still getting stuffed around, save your money and buy something else !!

Be careful with the Motor-Mount Screws (big ones on the right Side of the last Picture)!!!!!!

They don't have the same size, 3 out of 8 Screws were longer and because I didn't realize it (mounted 2 Motors before and the Screws for them fitted perfect), I have a broken Motor now...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Be careful with the Motor-Mount Screws (big ones on the right Side of the last Picture)!!!!!!

They don't have the same size, 3 out of 8 Screws were longer and because I didn't realize it (mounted 2 Motors before and the Screws for them fitted perfect), I have a broken Motor now...

Awesome motors! I just installed them on my newest quad and have had a blast flying with them. Sturdy construction, eye catching green colour and perfect performance have turned my quad into quite the show stopper! I'll be ordering another set soon.

The only problem I have is that the connectors were listed as 2mm when in reality they are 3.5mm!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Awesome motors! I just installed them on my newest quad and have had a blast flying with them. Sturdy construction, eye catching green colour and perfect performance have turned my quad into quite the show stopper! I'll be ordering another set soon.

The only problem I have is that the connectors were listed as 2mm when in reality they are 3.5mm!

update they found error acknowledged there error and sent engines ..and are great so far only day two but punch is great and just way more than expected on my first 250 build must have for build :) will post pick soon

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

update they found error acknowledged there error and sent engines ..and are great so far only day two but punch is great and just way more than expected on my first 250 build must have for build :) will post pick soon

well if I would of got the motors sure I would of wrote a good review since I got a screw driver in a box now have to fight with them to get my engines they say they weigh and barcode it all but no way other wise no way I could of got a screw driver instead of motors no way they weigh the same

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

well if I would of got the motors sure I would of wrote a good review since I got a screw driver in a box now have to fight with them to get my engines they say they weigh and barcode it all but no way other wise no way I could of got a screw driver instead of motors no way they weigh the same

Great little monsters, put them on my ZMR250, 3s 1500 mw nano lipo, 5 x 4.5 bull nose props. Ultimate blast, i'll be back for more ;-D

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great little monsters, put them on my ZMR250, 3s 1500 mw nano lipo, 5 x 4.5 bull nose props. Ultimate blast, i'll be back for more ;-D

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save