The MultiStar 1045 prop was made specifically for Mutli-Rotor use using a slot (DJI) style hub for proper centering and non-slip engagement. The Multistar line of props come in CW and matched CCW rotations and the center hubs are beefed up so no fear of splitting the hub and tossing a blade! They also have a thicker cross-section to minimize flexing and increase their durability. The 1045’s precision molding will allow these props to require very little to no balancing. Multistar is simplifying the world of Multi-Rotors with their purpose built product line and taking the guess work out of your setup.
Hub: slot (DJI) style, 8mm bottom Dia 7mm flat to flat and drop down to 6mm top hole
Two cCw props
Hmotnost ( g )
Pitch Y ( Inch )
Unit Weight (g):
Průměr X ( Inch ):
de gran calidad, muy resistentesbuena callidad y util a la hora de necesitarlas coomprenlaThis product is not sutable for DJI 2212 motors. The slot on propeller is only 3mm deap. And it is not fitting to the end. There is no posibility to put the nut on. I had to drill propeller by 8mm drill to fitt it to the motor.Absolutely impossible to balance these props. Bought plenty of them for MT2213-935KV and Quanum Venture drone. Used the best Dubro balancer but still high vibrations. For those who want to dare, your best bet is to use tape instead of sanding, but don't expect you'll make much of a difference once you start using it.These propellers are good quality and are made out of a strong beefy material, they are very solid. However, they are very heavy and due to their weight, the inertial mass of these props makes the motor response very slow...the motor response is so slow that the multirotor flight controller CAN NOT keep the multirotor stable and gives a very bad flight experience. I have tested with other lighter props and the flight characteristics were great. I Would keep away from these propellers if you want a nice flying multirotor.These propellers have a DJI style hub, but they do not fit the DJI 2212-920 motors, so no use on a DJI F450 or F550well done props, little work to balance but nice and stronggood quality props for multistar motors ordered them for my quanum venture multirotor. props have a little less flex than standard sf props.
really happy with them.
nice median between flexibility and rigidity. They did require a bit of balancing but other than that. They seem good.Nice props, have them fitted to the multistar 2212, good mix between stiffness and forgivability for the first flights on the quad