Registrovat

Product Finder

Nastavení

Useful links

 
[["US","AU","GB","DE"]]
Registrovat
Shipped From:
  • Global
  • USA

Multiwii MWC FC Bluetooth Module Programmer (Android compatible)

Multiwii MWC FC Bluetooth Module Programmer (Android compatible)

QTY:

Now save Uložit 0,00 € 0,00 €

6,68 €
Stock:
Váha:
19 g
SKU:
9387000028-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Popis
produktu

This handy bluetooth module is used to configure your Multiwii flight controller wirelessly from your Android device. You will need to download the Multiwii Configuration Android app to your mobile device to use this module. 

MultiWii Configuration App functions:
• Read and Write PID
• Setting switch adjustment for AUX1 and AUX2
• Monitor receiver signal and FC output signal
• Monitor all sensors and GPS signal
• Calibration for Magnetometer and Accelerometer
• Save and read profile
• Upgraded to more convince Molex 1.25mm plug
 
Specs:
Connectivity: Bluetooth / UART TTL socket
Dimension: 37.5x15x5mm
Weight: 4g / 7g (w/cable)

Default parameter:
Baud rate: 115200
Module name: HB02
Pair code: 1234

Included:
Bluetooth module x 1
UART 4Pin cable 200mm x 1

Product
Specifications

Další informace

  • SKU:
    9387000028-0
  • Brand:
    Ne
  • Hmotnost ( g )
    19.00
  • Délka
    60.00
  • Width:
    15.00
  • Výška:
    55.00
Community
Discussions
Rate&
Review

Napište vlastní recenzi

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
I was adjusting PIDs from my phone in no time. Great product and a must if you need to make changes to your flight controller in the field.
Quality
Value
Overall
Quality
Value
Overall
Using this with a homemade MultiWii controller, works fine out of the box. I see others say they've used with with 5v, but not for me. I'm running it through an adafruit level converter, just needed to add a 3.3v circuit to my controller. Recommended and would buy again.
Quality
Value
Overall
Quality
Value
Overall
Absolute must have for naze32
Quality
Value
Overall
Quality
Value
Overall
Decent Bluetooth chip. Was easy to install on Naze32 running cleanflight 1.9.0 plug and play. I use it with EZ-GUI on my Note4. Ive mounted it on the underside of a 180mm quad with Velcro, and get ~10m range LOS in parks. Good for monitoring vBat (I have no radio telemetry), and tuning PIDs during a session. Ive also used it to configure Cleanflight on my laptop connected via Bluetooth. The heatshrink is decently thick and provides good protection. The included leads are colour coded, and the PCB includes an ordered label. With total weight is approximately 4.5 with the leads, which can be re-crimped. They are the typical 2.54mm with single-position housings (I swapped to 2x 2-position).
Quality
Value
Overall
Quality
Value
Overall
j'utilise sur les cartes basecam 32bits et ca marche impeccable.plus de port usb qui gene pendant les auto pid sur les nacelles 3 axes...
Quality
Value
Overall
Quality
Value
Overall
I give it 4 stars because the lack of documentation, which can be found by a small amount of google magic. Other than that it works prfectly. Default settings it comes with are: Name HB-02, Password 1234 and 115200 baud.
Quality
Value
Overall
Quality
Value
Overall
This product is create because you can use it to create a Bluetooth bridge from your say, tablet to the 900mhz telemetry transmitter. This is great because you get a clean set up, and not all tablets support USB host mode for the transmitter! Remember, to swap your Tx and Rx round when you connect to your telemetry radio!
Quality
Value
Overall
Quality
Value
Overall
works as advertised with android devices. Board is set to the correct baud rate so no mods are required using an FTDI board. Trying to see what I need to do to get it to work with IOS devices so more to come ...maybe.
Quality
Value
Overall
Quality
Value
Overall
Fonctionne bien avec la Naze 32. Bonne qualit de realisation. Bon produit.
Quality
Value
Overall
Quality
Value
Overall
ormai le allmie control board non faccio mai mancare uno di questi
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
No File Name download now [114kb]

Štítky produktu

Štítky oddělujte mezerou. Víceslovné uzavřete v apostrofech (').