The Nemesis NXT is not just a stunning looking race aircraft, it is also a multiple record holder, the prototype exceeded 400mph on it's debut and was the first aircraft in it's class to achieve this, these kind of speeds are normally reserved for the Unlimited class planes!
Like the full size NXT, this model looks like it is doing 400mph even when it is standing still, it is a great size but also practical courtesy of the 2pc plug in wings. The superbly painted fuselage is fiberglass and features a large removable canopy for easy access, the wings and horizontal stabilizer are made from balsa, the wing also features fiberglass wingtips. The hardware kit comes with full alloy fixed under-carriage, the Nemesis is retract ready and the supplied Oleo leg's can be removed from the fixed mount to use with retracts if desired. The wing tube and tailplane joiners are all solid CF rod, another indicator that this is a high performance model.
To get the best from this superb model, we suggest a good 6s set up, this is a great flying plane that is quite capable of sport flying aerobatics but there is no doubt, low n fast is just too addictive for words! The Nemesis NXT has so much presense and will look great for years to come, a truly oustanding looking and performing model!
Elevator Area: 6.6dm2
Rudder Area: 3.55dm2
Flying Weight: 3500g
Your Own 4~6 Channel TX/RX
400kv~500kv Brushless Outrunner (6s capable)
80A ESC (Min)
4 x Standard size servo
air or electric retracts (optional)
5000mAh 6s Lipoly Battery
Hmotnost ( g )
Well I just got her and may I say, WOW she is a beaut! The wings seem a bit short, at first, till you realize the body adds over 6 inches, to the wing length. Then you will get another 4 inches, from the add on wing tips. Just be ready to have one half of the wing, to be completely, "Baby Blue" with no body cut in. (You can see what I mean if you look closely at photo 7 on the listing). Hay I have a long way to go with her yet, so stay tune for more to come. Also I do think it would be worth, buying retracts for this one.This is such a great kit! and one of the most beautifully finished fuselage for @$100.00! currently on the bench and getting closer to maiden-day, I can't wait!,NTM 5050-580kv,A-spec 3700-6s-60c,deluxe 100a esc,hk 41x40 plastic retracts-5mm,16x10 apcI received my Nemesis over the weekend and was pleasantly surprised. Good quality and surprisingly strong formers to add strength and durability to this model. Landing gear mounts are strong- there is plenty of support inside the fuselage and that paint job is awesome. My only problem- the vertical stab has some damage. The support where you would attach the rudder has been broken so come loose from the fibreglass- it is however fairly simple to repair.
I look forward to building and flying her.Very beautiful and well painted plane. Got mine with slightly damaged tail and cowling as others but nothing serious. The packing is wrong no styrofoam and both ends of the plane get bashed in transportation.
If you plan to make I bullet out of this like I did - forget about it. Fuselage is insanely wide like a boat, can accommodate 12s battery and a 1kg motor but the wings won't lift it up. On 6s I believe this will fly like a warbird but not a racer due to very thick forms. 1.6m wingspan P-51 I have has fuselage at least twice thinner.She is a real Beauty and Looks awesome - very smooth and shiny finish.
Fuselage is quite heavy and has a lot of heavy bulkheads which can/should be removed.
horizontal tail and rudder are extrodinary heavy and should be rebuilt of light balsa.
Wing tips are also heavy but no idea how to replace them without too much efford.
Spars for horizontal tail were missing in my kit - no Problem at all (Standard CfK-tubes)
Wheels are on the small side (but almost scale) - wheel cutouts in the fuselage have a Diameter of ~70mm; expandable to 90, maybe even 95mm (limited by to bulkheads).
Who accepts a little (more) effort on this plane will get a real bargain.
I received this beautiful kit well painted in an undamaged box only to find the cowl was pushed up against the motor mount causing 4 ugly holes in a otherwise beautifully well built kit. Hobby king are there spare parts you can offer for this plane.2 tage nach bestellung bereits erhalten!! alles war sehr gut verpackt!! der flieger sieht einfach super toll aus!!! rumpf ist wirklich sehr schn verarbeitet. flgel und hhenruder knnte etwas schner sein! aber fr diesen preis top! ein paar kleinteile waren leider nicht vollstndig im set enthalten... sollte aber kein problem sein! das GFK vollrohr fr das hhenruder war leider in 4 kurze stcke geschnitten, anstatt in zwei lange!
ein fahrwerk kam schon zerbrochen. HK habe ich kontaktiert und die werden mir das fahrwerk ersetzen. leider dauert es 3 monate!! was ich ziemlich lcherlich finde! mchte nicht wissen, wie lange es dauert, wenn das kit mit einem defekten rumpf oder flgel kommt...
der flieger ist ein echter hingucker...super schnes modell! werde es mit 6 oder 8S betreiben.
flieger TOP....fahrwerk service FLOP!