New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

NGH GT35R 35cc Rear Exhaust Gas Engine (4.2hp)

NGH GT35R 35cc Rear Exhaust Gas Engine (4.2hp)

Shipped From:
  • USA
  • Global
QTY:

Now save Uložit 0,00 € 0,00 €

209,34 €
Stav:
Skladem
SKU:
406000004-0
WANT FREE SHIPPING? Click here to find out more!

NGH Engines are gaining a well-deserved reputation for performance and value. The ongoing development from NGH makes these some of the best on the market today. The NGH GT35R is a solid performer with plenty of power and excellent reliability.

The engine has a front mounted carb allowing it to be installed into most models with ease. No bulky carb hanging off the side like some other models on the market. 

Features:
• Compact and lightweight
• Ability to change from rear to side exhaust
• Traditional beam or radial mount
• Excellent quality and performance

Specs:
Type: Gas 2 stroke engine
Power: 4.2hp
Cylinders: Single
Displacement: 34.95cc
Bore x Stroke: 37.3 x 32mm
Crank Type: Forged with dual bearing support
Crankshaft Thread: 3/8"x 24TPI
Carburetor: Walbro WT series (diaphragm and butterfly valve)
RPM Range: 2000 - 9000rpm
Ignition: Auto advanced RCEXL DC-CDI
Spark Plug: CM6 Rcexl
Ignition Power: 4.8V DC (4 cell NiMH battery)
Fuel: Unleaded Gas/Oil mix 33:1
Recommended Propellers: 18x8/18x10/20x8 2 blade
Weight: 1400g with ignition system

  • SKU 406000004-0
  • Brand NGH
  • Kapacita ( mAh ) -
  • Hmotnost 2217.0000
  • Délka 170.00
  • Width 110.00
  • Výška 170.00
  • NGH Gas Engine
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

The engine looks very nice, but is a bit roughly finished inside.
The front bearing was leaking, no big deal, I fixed this by putting some sealing behind the front bearing. The first starts were very difficult, it needed excessive swinging from my electric starter, but after a few houres of bench running it got better.
The compression gets better can finally hand start it now.
Maybe worth noticing, the silencer does not silence anything :-) , but that is no different than other brands.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The engine looks very nice, but is a bit roughly finished inside.
The front bearing was leaking, no big deal, I fixed this by putting some sealing behind the front bearing. The first starts were very difficult, it needed excessive swinging from my electric starter, but after a few houres of bench running it got better.
The compression gets better can finally hand start it now.
Maybe worth noticing, the silencer does not silence anything :-) , but that is no different than other brands.

The engine is well made.

At this price I can not get better.

I can not wait to prop it up my Kawasaki Ki-61 Hien 1/5.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The engine is well made.

At this price I can not get better.

I can not wait to prop it up my Kawasaki Ki-61 Hien 1/5.

hi purchased this engine in January I have just tried starting it and it will not suck fuel up to the carb as any one any idea what to do many thanks

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

hi purchased this engine in January I have just tried starting it and it will not suck fuel up to the carb as any one any idea what to do many thanks

"half yearly sale" unbeatable price nice product.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

"half yearly sale" unbeatable price nice product.

I do not like writing a bad review but I have a 35cc engine I can not use without making the model very ugly. What I mean by that is, the engine itself is a great looking engine and runs very well upright (so worth the money and the support is great with Hobbyking). But as 90pcnt of us modelers mount engines inverted (upside down) in the cowl to hide them, this engine refuses to run inverted. mounted upright on the bench for break in, it ran great. But once mounted on the plane it refuses to start or run. I sent them a video with the set up IE-fuel tank position,fuel line routing,etc which was correct and My attempt to start it but never heard back on a solution ? The first engine arrived damaged and they replaced it without any grief. Kudos to them. I am going to end up mounting on a different plane to make use of it with the head sticking out the top sadly. PS I have engines from DA and others that run great inverted, it's not an incorrect install.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I do not like writing a bad review but I have a 35cc engine I can not use without making the model very ugly. What I mean by that is, the engine itself is a great looking engine and runs very well upright (so worth the money and the support is great with Hobbyking). But as 90pcnt of us modelers mount engines inverted (upside down) in the cowl to hide them, this engine refuses to run inverted. mounted upright on the bench for break in, it ran great. But once mounted on the plane it refuses to start or run. I sent them a video with the set up IE-fuel tank position,fuel line routing,etc which was correct and My attempt to start it but never heard back on a solution ? The first engine arrived damaged and they replaced it without any grief. Kudos to them. I am going to end up mounting on a different plane to make use of it with the head sticking out the top sadly. PS I have engines from DA and others that run great inverted, it's not an incorrect install.

My motor had ignition set way too far advanced out of the box 42deg, giving misfire throughout the rev range,retarded sensor to max retard fixed it after several plug changes and CDI box change. Muffler came loose after a few flights even though I loctited bolts,needed to be torqued when motor was hot. All in all a powerful motor with flexible mounting options and genuine Walbro carb.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

My motor had ignition set way too far advanced out of the box 42deg, giving misfire throughout the rev range,retarded sensor to max retard fixed it after several plug changes and CDI box change. Muffler came loose after a few flights even though I loctited bolts,needed to be torqued when motor was hot. All in all a powerful motor with flexible mounting options and genuine Walbro carb.

Awesome quality in construction. Looks great. Very good manual, better than most product manuals in the industry. Can't wait to install and run it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Awesome quality in construction. Looks great. Very good manual, better than most product manuals in the industry. Can't wait to install and run it.

great motor runs well straight out of the box. Easy to hand start when installed upright but needs fuel priming when upside down. The exhust is nicely designed and hasnt come loose. Love the carby being mounted up front a lot easyer to set up throttle linkages compared to rear carb motors.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

great motor runs well straight out of the box. Easy to hand start when installed upright but needs fuel priming when upside down. The exhust is nicely designed and hasnt come loose. Love the carby being mounted up front a lot easyer to set up throttle linkages compared to rear carb motors.

Customer files
No File Name Download [5304]
531971971X494440X8.jpg Download [1796]
No File Name Download [2109]
GT35ExplodedView.pdf Download [351]
GT35-rear.jpg Download [16]
NGH35R-Dimensions.pdf Download [727]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save