Prop Drive motors are rock-solid performance s with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way through to final dyno test.
Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure product consistency from design right through to shipping the product to you. The removal of middle-men has meant we can drive better value to the market and retail these motors at factory (our) prices! All performance figures are real and tested on our own motor dynos.
Our QC engineers check and balance each motor before shipping to the HobbyKing.com warehouse.
Model: Prop Drive Series 2826 1000
Motor Wind: 19T
Max current: 15A
Max Power: 176W @ 11.1V (3S) / 235W @ 15V (4S)
Cell count: 3s~4s
Bolt holes: 16mm & 19mm
Bolt thread: M3
Prop Test Data:
9x4.7 - 11.1V / 113W / 10.2A / 0.632kg thrust
9x6 - 14.8V / 220W / 14.9A / 0.937kg thrust
Note: An accessory pack is available for this motor. Please see the related items below.
Hmotnost ( g )
Kv (rpm / v)
Maximální proudy (A)
Výkon ( W ):
Délka B ( mm ):
Může Délka D ( mm )
Maximální napětí ( V)
Hřídel A ( mm ):
Unit Weight (g):
Průměr C ( mm )
Celková délka E ( mm )
Odpor ( mh):
Good little outrunner, I have noticed that there does appear to be slight bearing movement but doesn't affect operation. Nice quiet little unitReally little motor, smaller than the images seem to be.
Make attention to the fact the rotor is 'inversed' I will post some video about it.
it seems to be a really nice power/weight ratio.These motors are rock steady for the price. I have them on a 650mm quad and they do a great job. Running them with 20a esc's and have had no problems. Don't forget to get the prop adapters.the real problem of this motor is the BEARINGS.
my advice is not to buy.
I bought this because i'm a beginnergood motor just dont expect to break any speed records very good for a trainer plane such as the bixlersInstalled these on my Q450 (upgraded from 2210n) and they made a huge difference. Same KV rating, but loads more power!
Nicely balanced and reasonably quiet, I flew around for 30 mins or so, getting through 2 LiPo's while fighting the breeze and the motors (and batteries) stayed nice and cool.
Definitely worth the money.nice littel slow flyer motor. dynamically balanced but came with defective rear ball bearing. runs almost vibrationless after ball bearing was replaced. grub screw at the rear end was secured using some red colored screwlock. needed to wipe off the excess that did not cure.bad bearing...bought 6 of them..2 craps because of bad bearing..dont really recommend this motor unless you want to change the bearing.moteur de qualit pour le prixI have recently bought 5 of these motors for a quad copter. 4 for the quad and 1 extra based on reviews. One of these motors was bad from the factory and would barely turn when put on the quad. Thankfully HK made it good and gave me credit. The first time I flew the quad on about the third flight 3 of the 4 motors broke, each loosing the circlip and the shaft either coming part or all the way out of the motor. Please don't waste your money on these motors for you quad they are horrible and will not hold up.
POLES & WINDINGS download now [2629kb] Short Shaft Version download now [4840kb] HOW 2 BEARINGS #3 download now [2121kb] HOW 2 BEARINGS #4 download now [2292kb] HOW 2 BEARINGS #5 download now [1891kb]