NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way through to final dyno test.
Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure product consistency from design right through to shipping the product to you. The removal of middle-men has meant we can drive better value to the market and retail these motors at factory (our) prices! All performance figures are real and tested on our own motor dynos.
Our QC engineers check and balance each motor before shipping to the HobbyKing.com warehouse.
Model: NTM Prop Drive Series 2836 3000kv
Motor Wind: 5T
Max current: 55A
Max Power: 396W @ 11.1V (3S) / 755W @ 15V (4S)
Cell count: 3s~4s Lipoly
Bolt holes: 16mm & 19mm
Bolt thread: M3
Connection: 3.5mm Bullet-connector
Prop Test Data:
4.5x4.5 - 11.1V / 334W / 30.1A / 0.82kg thrust
4.5x4.5 - 14.8V / 755W / 51A / 1.31kg thrust
4.75x4.75 - 11.1V / 396W / 35.7A / 0.836kg thrust
Note: An accessory pack is available for this motor. Please see the related items below.
Hmotnost ( g )
Kv (rpm / v)
Maximální proudy (A)
Výkon ( W ):
Délka B ( mm ):
Může Délka D ( mm )
Maximální napětí ( V)
Hřídel A ( mm ):
Unit Weight (g):
Průměr C ( mm )
Celková délka E ( mm )
Odpor ( mh):
Put this motor on a teksumo, 4.75_4.75 prop, 3s 2200 lipo and 40amp esc. Amazing power very impressed with power and quality of this motor. Will definitely by again.Well I had this on backorder and after some time I was very pleasantly surprised that it was shipped to me even though it is still on backorder at the warehouse. So thank you HK seems the backordering worked for me this time.El motor ideal para el avion PILONGewicht 87,98g mit Kabel und Stecker, Kabel inkl. 3,5mm Goldkontaktstecker 6,5cm lang, freie Motorachse 17mm, schoene Ausfuehrung ohne weiterem ZubehoerFliege den Motor in der Durafly Me 163 mit einem APC 4,75x4,75 Prop und bin begeistert von der Leistung.For comparison, stator size on this motor is about 22mm wide by 23mm long. Inspected the motor before use, and found one of the windings to be touching the inner part of the bell, near the bearing. Moved it out of the way and applied a littlebit of CA. Bearings could be better. Much extra vibration after not many flights. But still pushes a funjet ultra to 200kph in level flight on 4s, turning a 5.5x4.3 turnigy speed prop. Quality could be better, but with a littlebit of care, it works great for the price.Excellent motor! I use it on Radjet 800 and 4S pack and 5x5 propeller.
It handles about 830wI have used two of these motors with the same result both times. Bought the second one
to confirm that I hadn't done something wrong with the first one. These motors get so hot
at even half throttle that the input wires burn the insulation off and short out, taking the controller with it! I got less than two minutes of running time out of both of these units at just over half throttle! they are not capable of the 3000KV performance as advertised!
Big disappointment.good engine, the cost is eccellentgreat motors, always liked their SK3 serries but their NTM's are very robust, this was a replacement to my EFX and now it smokes!!
No File Name download now [1577kb] No File Name download now [1227kb] No File Name download now [1202kb] No File Name download now [1202kb] No File Name download now [1227kb] No File Name download now [1227kb] No File Name download now [1202kb]