New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

NTM Prop Drive Series 35-36A 910Kv / 350W

NTM Prop Drive Series 35-36A 910Kv / 350W

Discontinued Product

Please continue searching for a similar product.
SKU:
NTM3536A-910
WANT FREE SHIPPING? Click here to find out more!
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings, tool-steel shafts plus they are QC checked at 14 points, from material processing all the way through to final dyno test.

Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure product consistency from design right through to shipping the product to you. The removal of middle-men has meant we can drive better value to the market and retail these motors at factory(our) prices! All performance figures are real and tested on our own motor dynos.
Our QC engineer checks and balances each motor before shipping to the HobbyKing.com warehouse.

Model: NTM Prop Drive 35-36A 910
Kv: 910rpm/v
Turns: 10T
Max current: 38A
Rated Power: 350w
Shaft: 4mm
Weight: 117g
Bolt holes: 18.9mm & 25mm
Bolt thread: M3
ESC: 30A
Cell count: 3S Lipoly
Suggested Prop: 10x4
Efficiency: 83%
A great plane motor  up to .30 size.
  • SKU NTM3536A-910
  • Brand -
  • Hmotnost 147.0000
  • Délka 100.00
  • Width 40.00
  • Výška 70.00
  • Kv (rpm / v) 910.00
  • Maximální proudy (A) 35.00
  • Odpor ( mh) 0.00
  • Maximální napětí ( V) 11.00
  • Výkon ( W ) 350.00
  • Hřídel A ( mm ) 4.00
  • Délka B ( mm ) 38.00
  • Průměr C ( mm ) 35.00
  • Může Délka D ( mm ) 23.00
  • Celková délka E ( mm ) 58.00
  • NTM Prop Drive Series 35-36A 910Kv / 350W
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Bought to power my Phoenix 2000 after the NTM 28-36 1000kv i had before burned, and also destroyed my ESC.
What a difference : far lower consummation and barely warm even after lot of solicitation, could be perfect choice if only it was lighter.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought to power my Phoenix 2000 after the NTM 28-36 1000kv i had before burned, and also destroyed my ESC.
What a difference : far lower consummation and barely warm even after lot of solicitation, could be perfect choice if only it was lighter.

Great motor, got it for my Skywalker1900, powers it very well, very well made, i have 3 NTM motors and cannot fault them. amazing value for money as well.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great motor, got it for my Skywalker1900, powers it very well, very well made, i have 3 NTM motors and cannot fault them. amazing value for money as well.

Very powerful on 3 or 4 cells. With a 10-6 APC but poor balance with no prop. I checked the prop hub for out of round and it seems fairly true. I see no indication that any balancing was done as you usually see some blue stuff inside the motor on the Turnigy line. FYI, I got a max 1800 gm thrust at 25 amp on 4 cells and 1300 at 18 amps in 3 cells. This was crude test with the motor taped to a digital scale and a pusher configuration. I don't understand why they make these things with the shaft out the back. Seems like it was meant for something else. Mine came in a plastic bag with no box or label. Same for the prop mount. Next time I need a cheap motor, I'll go with the Turnigy stuff as I think they are balanced better.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very powerful on 3 or 4 cells. With a 10-6 APC but poor balance with no prop. I checked the prop hub for out of round and it seems fairly true. I see no indication that any balancing was done as you usually see some blue stuff inside the motor on the Turnigy line. FYI, I got a max 1800 gm thrust at 25 amp on 4 cells and 1300 at 18 amps in 3 cells. This was crude test with the motor taped to a digital scale and a pusher configuration. I don't understand why they make these things with the shaft out the back. Seems like it was meant for something else. Mine came in a plastic bag with no box or label. Same for the prop mount. Next time I need a cheap motor, I'll go with the Turnigy stuff as I think they are balanced better.

Sehr gute Verarbeitung,

ist voll und ganz zu empfehlen.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Sehr gute Verarbeitung,

ist voll und ganz zu empfehlen.

great little motor running a 13x4 prop

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

great little motor running a 13x4 prop

beautiful motor, solid to hold, built good, runs perfect low noise,

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

beautiful motor, solid to hold, built good, runs perfect low noise,

I bought this for an f550, im using 30 amp afro esc, naza v2, and slow fly Carbon mixed 10x4.5 props, with a 5200 4s multistar lipo, it can handle 10 minutes of mixed flying, and about 8 with a gopro and tarot gimbal, motors and esc cold on landing, i'm not sure if stock dji motors come down as cool as this do, i went ahead and put a larger gimbal and a black magic pocket, it handled 5 minutes "on a 5000 20c 4s zippy (flying 2 minutes with the multistar lipo was just insane, as the battery came down boiling)" amazing considering its overall 4 kg weigh.

I'd have to say it is great, except for a Very big issue which is, e-rings tend to loosen the shaft, luckily it hasn't made a mess, but you can see like 5mm of the bell coming out, so watch out

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought this for an f550, im using 30 amp afro esc, naza v2, and slow fly Carbon mixed 10x4.5 props, with a 5200 4s multistar lipo, it can handle 10 minutes of mixed flying, and about 8 with a gopro and tarot gimbal, motors and esc cold on landing, i'm not sure if stock dji motors come down as cool as this do, i went ahead and put a larger gimbal and a black magic pocket, it handled 5 minutes "on a 5000 20c 4s zippy (flying 2 minutes with the multistar lipo was just insane, as the battery came down boiling)" amazing considering its overall 4 kg weigh.

I'd have to say it is great, except for a Very big issue which is, e-rings tend to loosen the shaft, luckily it hasn't made a mess, but you can see like 5mm of the bell coming out, so watch out

Fine motor but the motor shaft is too small. Engine bearings are good but the shaft is loose in the bearings. Assembled new axle from Dualsky and it fit perfectly in the bearings. Now the engine is good and goes silent._____Fin motor men motoraxeln r fr liten, ls inne i lagret. Provade en axel frn Dyalsky motorn och den passade perfekt i lagrena p NTM motorn. Monterade i axeln och nu gr motorn tyst.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fine motor but the motor shaft is too small. Engine bearings are good but the shaft is loose in the bearings. Assembled new axle from Dualsky and it fit perfectly in the bearings. Now the engine is good and goes silent._____Fin motor men motoraxeln r fr liten, ls inne i lagret. Provade en axel frn Dyalsky motorn och den passade perfekt i lagrena p NTM motorn. Monterade i axeln och nu gr motorn tyst.

A good motor, but beware that the mount and prop adapter are not included. Really wish they were.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A good motor, but beware that the mount and prop adapter are not included. Really wish they were.

Mit einem 10x4 Prop. messe ich bei 10,4 V Netzteil entspricht etwa 3S Lipo mit dem HK010 Power Analyser 14,8 A bei 8200 U/min. was 148 Wh ergibt.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Mit einem 10x4 Prop. messe ich bei 10,4 V Netzteil entspricht etwa 3S Lipo mit dem HK010 Power Analyser 14,8 A bei 8200 U/min. was 148 Wh ergibt.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 8
Customer files
Dyno Chart Download [96]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save