New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

Quanum Outlaw 180 Racing Drone (P&P)

Quanum Outlaw 180 Racing Drone (P&P)

Discontinued Product

Please continue searching for a similar product.
SKU:
9192000295-0
WANT FREE SHIPPING? Click here to find out more!

Quanum Outlaw 180 Racing Drone (P&P)

Another excellent build in our Quanum Outlaw Racing Series. The Outlaw 180 comes pre-built so just add a receiver and battery and you are ready to go.

Power is provided to the Outlaw 180 by excellent Multistar 2204-2300 motors running 5” propellers. All electronics is provided on the same board this includes the 20A Afro Race Spec ESCs, CC3D flight controller (running Openpilot) and power distribution. 

The Outlaw 180 comes with a strong 3mm one-piece carbon fiber lower deck. It would take a lot to inflict damage on this Outlaw. Above is a 1.5mm upper deck. Between decks there is huge open spaces for FPV camera, receiver and video transmitter. The FPV camera mount tilts for those high speed flights.  

The Outlaw 180 is supplied complete with a full set of props, CW & CCW prop adapters and all fixtures and fittings.  A set of lights show the posse where you are. This is a great pro level kit, all built and ready for the stampede.

Features:
• One-piece Carbon Fiber Bottom Frame (3mm)
• One-piece Carbon Fiber Top Frame (1.5mm)
• Lean back Carbon Fiber front camera mount
• CC3D Flight controller running Openpilot
• 20A Afro race spec speed controllers
• Powerful Multistar 2300Kv motors
• Uses 5" 5030 propellers

Specs:
Motor: Multistar 2204 2300Kv
ESC: 20A Afro Race Spec
Flight Controller: CC3D
Wheelbase: 200mm
Size: 160x182x54mm (without legs)

Includes:
1 x Quanum Outlaw 180 Racer
2 x CW 5" 5030 propellers
2 x CCW 5" 5030 propellers
1 x Receiver data cable
1 x Battery strap
4 X CW & CCW motor hubs
1 x Manual

Requires:
5~6ch control radio and receiver
1300~1800 3~4s battery
FPV gear optional

  • SKU 9192000295-0
  • Brand Quanum
  • Kapacita ( mAh ) -
  • Hmotnost 628.0000
  • Délka 270.00
  • Packaging Width 165.00
  • Výška 245.00
  • Quanum Outlaw 180 Racing Drone
  • outlaw 180
  • outlaw 180
  • outlaw 180
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I have bee using this from a while now, while i'm trying to improve my skills.
First i've bought a walkera runner 250, but it went down 3 times without any pilot error, due to some cold soldering between esc and motors.
This quanum outlaw it does not fly perfectly right out the box, but after few tweaks with pids it became very stable and fun to fly.
As other stated it is needed to mode it a little bit, to make sure the propellers does not hit the top plate. It is also a pain in the ... to install a FPV kit, and you have to pay attention to size of the camera and the Vtx.
It does fly nice and steady, can be fast enough even for an intermediate pilot, and quite resilient, enduring some crashes whit ease.
For someone who just get started, or what to start into drone-racing, this is a fun little quad that can help him or she to learn.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have bee using this from a while now, while i'm trying to improve my skills.
First i've bought a walkera runner 250, but it went down 3 times without any pilot error, due to some cold soldering between esc and motors.
This quanum outlaw it does not fly perfectly right out the box, but after few tweaks with pids it became very stable and fun to fly.
As other stated it is needed to mode it a little bit, to make sure the propellers does not hit the top plate. It is also a pain in the ... to install a FPV kit, and you have to pay attention to size of the camera and the Vtx.
It does fly nice and steady, can be fast enough even for an intermediate pilot, and quite resilient, enduring some crashes whit ease.
For someone who just get started, or what to start into drone-racing, this is a fun little quad that can help him or she to learn.

I found this quad easy to set up. I updated the control board and used LibrePilot to set it up. I did see several complaints about the front props striking the frame in the camera area. The quad did come with GemFan 5030 props. The 5" prop will not work without frame modifications to the front. I am running GemFan 4040 three blade props which clear the frame and the camera mount. Hey Hobbyking - please package this quad with 4" props - I did fly very gently with the 5" props and found the tips of the front props impacted the top camera mounting nuts, took the tips of the props off. Any high G maneuvers would have broken the props and caused a crash.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I found this quad easy to set up. I updated the control board and used LibrePilot to set it up. I did see several complaints about the front props striking the frame in the camera area. The quad did come with GemFan 5030 props. The 5" prop will not work without frame modifications to the front. I am running GemFan 4040 three blade props which clear the frame and the camera mount. Hey Hobbyking - please package this quad with 4" props - I did fly very gently with the 5" props and found the tips of the front props impacted the top camera mounting nuts, took the tips of the props off. Any high G maneuvers would have broken the props and caused a crash.

Cheap, easy to get flying, strong.
I use triblade 4040-4050 props, and this gives more room for camera-setup.
Very clean wiring from factory, so its easy to install vtx and reciver.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Cheap, easy to get flying, strong.
I use triblade 4040-4050 props, and this gives more room for camera-setup.
Very clean wiring from factory, so its easy to install vtx and reciver.

Would never buy a Quantum product again.
No spare parts available.
My LEDs broken and no replacement available!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Would never buy a Quantum product again.
No spare parts available.
My LEDs broken and no replacement available!!!

Props are basically built to flow through the frame. Which mean it difficult to put a came or receiver on the bottom plate.
Other than that it was the single most stable flying quad out of the box ive ever purchased,
It would be perfect for line of site.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Props are basically built to flow through the frame. Which mean it difficult to put a came or receiver on the bottom plate.
Other than that it was the single most stable flying quad out of the box ive ever purchased,
It would be perfect for line of site.

I purchased the ARF version and found there are major problems with prop clearance in the front section. you can see from there are deliberate cutouts from the factory for the rear props, but in the front the props run underneath the top deck and make contact with the camera mount bolts in fast forward flight when the props flex upwards. after many chat sessions and beating my head against a wall, HK product specialist recommended using a 4 inch prop as a solution. UNACCEPTABLE!! especially when the product claims to be ready for 5 inch props. My solution was to dremmel clearance into the top plate, except this has the effect of deleting the top mounts for fpv camera. overall after the mod, the quad flies nicely. the update firmware is fairly simple. Just wish it worked as advertised and I didn't have to beta test this one for them.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I purchased the ARF version and found there are major problems with prop clearance in the front section. you can see from there are deliberate cutouts from the factory for the rear props, but in the front the props run underneath the top deck and make contact with the camera mount bolts in fast forward flight when the props flex upwards. after many chat sessions and beating my head against a wall, HK product specialist recommended using a 4 inch prop as a solution. UNACCEPTABLE!! especially when the product claims to be ready for 5 inch props. My solution was to dremmel clearance into the top plate, except this has the effect of deleting the top mounts for fpv camera. overall after the mod, the quad flies nicely. the update firmware is fairly simple. Just wish it worked as advertised and I didn't have to beta test this one for them.

Customer files
Pic of it all together Download [97]
RC Afro 20A Race Spec 4-in-1 ESC and CC3D Flight Controller Manual Download [814]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!