This EPO Mustang has an excellent scale finish, with panel lines, rivets, radio mast and cockpit detail. The quality pre-applied decals and silver paint really finish off the appearance of this model and if that wasn't enough, it also includes a very unique features for a model of this size. The ARF version also includes servoless electric retracts a scale 4 blade prop and performance 2 blade prop, the spinner is lightweight to ensure no balance problems.
Again, like the PNF version, the powered canopy and control unit is also pre-installed, so you can still taxi out to the runway like the real thing, Canopy back, pre-flight checks, flick of your a switch on your TX and watch the hood slide forward, now you are ready to fly!
This model is a nice size for transporting but large enough to have presence, this kit version is ideal for those wanting to fit their personal choice of power train/servo's or as a crash kit for PNF version owners.
Wing Span: 1200mm
Flying Weight: 1300g
6 Channel (motor, aileron, elevator, rudder, landing gear, powered canopy)
Servoless electric retracts (pre-installed)
Powered auto canopy (Pre-installed)
4 blade 10x8 and 2 blade 11x7 prop & spinner
Fittings, screwdriver, glue and instruction sheet.
6 Channel RX/TX
2200mAh 3s Lipoly
4 x 9g servo
* Only 2.4ghz Radio Systems are reccomended for this model
Kapacita ( mAh )
Hmotnost ( g )
Received from NL Warehouse to Poland in good order also arrived very quickly. Build was quick and simple. Maiden flight had no surprises, had to hand launch as grass too long and wet for retracts,nice slow stable approach, rolls and loops with ease. Quality seem good with some nice scale details. A lot of plane for the money.
nice detail plane,and great scaleSuper Flieger, sehr schn verarbeitet und fliegt super.
Schwerpunkt nach hinten verlagern bis Sie nicht mehr kopflastig ist.
Mit Fn und Sekundenkleber schnell reparabel.
Danke HK, ich bin zufrieden.Mine came with broken auto canopy, therefore three stars. Otherwise nice plane and great performanceWhen I opened the box ever thing was well packed, but one wing was cracked under the main body, ok I glued the crack,.. I Inserted Turnigy D3542/6 1000KV motor, and it fits nicely, but you must unscrue the metallic motor holder off the plane. I added all HobbyKing 929MG Metal Gear Servo 2.2kg, just to make sure they doesn't break and crash land the plane. All have retracts problem- I solve that problem with dressing the square plastic holder with thin metal and I glued it on-that must made it 2x stronger. Weight is 1.3 kg full thrust with 2 blade prop is 1.31kg 30A and the consumption of batt is in 12sec 0.1Ah (HK-010) and 300W. I didn't measure 4 blade prop yet, but I know that is 420W and 42 A.Hi
Just want to say that quality of this product is excellent, I give 5*, the only problem i found for me, is to connect cables since i am very "green" with electronics.....
All dtails are excellent, easy to assemble, large plane....and take special attention to retracts, I think it may be needed to reinforce the gear, and as I seen it in another user, a simple washer may be the best choice.
Quick deliver from Germany to Portugal....around 3 working days...very very nice...no taxes payed at customs since its EU transport....I wish i have a HK in Portugal....one day maybe...I received the beautiful mustang after only 12 days! It 's beautiful. When I have some time I cimenter construction. E 'come perfectly packaged along with other details that I ordered, with a 30pcnt surcharge on the price in dollars. Soo entusiast! Thanks Hobby King!received from D.E warehouse all in good order no damage, however found the paint job could be better.I purchased the kit version so installed my own esc,motor,servos e.t.c,this is not for the novice builder as the instructions are none existant as they are with all h/king gear (get your act together h/king).In general its a nice size ,the build wasnt too bad ,had to alter the battery compartment and glued the main wing in places as i didnt think the fit was secure enough to the main body.The rotor blades are a waste of time as is the nose cone ,too flimsymine destroyed itself on the first fire up lol. In general not a bad plane ,not for the novice to build,some parts could be a lot better COG wants to be around 9cm from the leading edge closest to the fuselagejust recieved my seventh plane from hk.arived with no damage very well packed.love the planes and awsome prices.capt.crash.Today is the Mustang arrived, everything is OK, but not that this manual would be very useful for electrical connections... someone can help me figure out where they connect the two three-prong plugs (male) who are in wings? Thanks, also by email: firstname.lastname@example.org
Motor size download now [40kb] Motor mount download now [45kb] Modification of spinner plate download now [51kb] Steel washer on spinner plate download now [43kb] Spinner construction download now [41kb] Spinner screws too long download now [43kb] spinner screws too long download now [43kb] Mounting of propeller and spinner download now [50kb] Spinner distance to cowling download now [49kb] 619241393X481737X28.JPG download now [2460kb] piece of spare download now [32kb]