New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

Power HD 1201MG Metal Gear Servo 12.2kg / 0.16sec / 60g

Power HD 1201MG Metal Gear Servo 12.2kg / 0.16sec / 60g

Discontinued Product

Please continue searching for a similar product.
Váha:
97 g
SKU:
HD-1201MG
WANT FREE SHIPPING? Click here to find out more!
Model: HD-1201MG
Voltage: 4.8~6.0v
Speed: 0.16~0.14sec
Torque: 12.2~13.2kg/cm
Weight: 60g
Size: 40.7x20.5x39.5mm
  • SKU HD-1201MG
  • Brand -
  • Hmotnost ( g ) 97.00
  • Délka 70.00
  • Width 40.00
  • Výška 60.00
  • Točivý moment ( kg) (min . 0,01 kg ) 12.20
  • Rychlost ( Sec / 60deg ) 0.16
  • A ( mm ) 46.00
  • B ( mm ) 41.00
  • C ( mm ) 42.00
  • D ( mm ) 21.00
  • E ( mm ) 56.00
  • F ( mm ) 29.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

hi. i use it as sailservo on my thunder tiger victoria.squesed out 110 degrees of travel
strong servo,in double pull setup she bend the sailarm.
for this price,really great.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

hi. i use it as sailservo on my thunder tiger victoria.squesed out 110 degrees of travel
strong servo,in double pull setup she bend the sailarm.
for this price,really great.

Just installed in my Genesis seems like a good servo.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just installed in my Genesis seems like a good servo.

Great little servos, I use them in powered and slope combat wings and never had a problem.

Also use the plastic gear version in slow and vintage models with the same success. Far better than HXT900 servos.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great little servos, I use them in powered and slope combat wings and never had a problem.

Also use the plastic gear version in slow and vintage models with the same success. Far better than HXT900 servos.

Voor dit geld zien er de servo's er niet slecht uit geen speling
op de tandwielen en de snelheid is is ook goed

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Voor dit geld zien er de servo's er niet slecht uit geen speling
op de tandwielen en de snelheid is is ook goed

Savage XS. . . , , .. . &#10

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Savage XS. . . , , .. . &#10

Have 3 of these on a 30cc yak 54. One on them on one side of the elevater would every now and then drift around like it's possesed when the plane is turned on. It also has some slight centering issues. I managed to desolder then rip out the hot glue holding the pot in. I then opened the pot and cleaned it with a phenyl contact cleaner. This was not easy to do. Flew it for a few hours since and so far so good. Problem seems to of gone away. FYI I bought these about a year ago. I notice the labels on the new ones look different. Same 1201MG though.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Have 3 of these on a 30cc yak 54. One on them on one side of the elevater would every now and then drift around like it's possesed when the plane is turned on. It also has some slight centering issues. I managed to desolder then rip out the hot glue holding the pot in. I then opened the pot and cleaned it with a phenyl contact cleaner. This was not easy to do. Flew it for a few hours since and so far so good. Problem seems to of gone away. FYI I bought these about a year ago. I notice the labels on the new ones look different. Same 1201MG though.

Using 3 on a 25pcnt Yak 54 DLE30. 2 on elev and 1 on rudder. 5.8V regulated. 1 on elevator would drift upon turning on power. Only happens about every 10th time I turn on power?? Looked possessed by evil spirit! Also centering would change a small amount from day to day use. I cleaned Pot with Poly Phenyl Ether Contact Cleaner. FYI you have to de-solder then use sharp needle nose to gently tear out hot glue holding pot in. Just on the top. NOT EASY. Bend tabs on pot back after marking position with pen. Scrub pot surface with Q-tip soaked with Phenyl contact cleaner. Re-assemble! Now you have to re-hot glue then re-solder together. NOT Easy. I'll try to update as to whether I see drift and centering issues again. Also I noticed the label changed from the servos I bought compared to the photo I'm seeing now. One of my labels fell off. 1201MG.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Using 3 on a 25pcnt Yak 54 DLE30. 2 on elev and 1 on rudder. 5.8V regulated. 1 on elevator would drift upon turning on power. Only happens about every 10th time I turn on power?? Looked possessed by evil spirit! Also centering would change a small amount from day to day use. I cleaned Pot with Poly Phenyl Ether Contact Cleaner. FYI you have to de-solder then use sharp needle nose to gently tear out hot glue holding pot in. Just on the top. NOT EASY. Bend tabs on pot back after marking position with pen. Scrub pot surface with Q-tip soaked with Phenyl contact cleaner. Re-assemble! Now you have to re-hot glue then re-solder together. NOT Easy. I'll try to update as to whether I see drift and centering issues again. Also I noticed the label changed from the servos I bought compared to the photo I'm seeing now. One of my labels fell off. 1201MG.

Nutze es im Reely Crawler einfach klasse

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nutze es im Reely Crawler einfach klasse

Got mine this morning. Ordered 5, tested them all and work great. Super fast shipment and boxed well. Will order more to keep as spares. Such a great price for metal gear servo. Would highly recommend to anyone that is look for metal gear cheap servos. Thanks HK!!! :D

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Got mine this morning. Ordered 5, tested them all and work great. Super fast shipment and boxed well. Will order more to keep as spares. Such a great price for metal gear servo. Would highly recommend to anyone that is look for metal gear cheap servos. Thanks HK!!! :D

este servo se paro al primer vuelo en mi raptor 50 con la consecuencia que rompio el heli,hobiking no se izo cargo ,desmonte el servo i el cable del motor desoldado , mui mala calidad no lo recomiendo ,i menos en un avion o heli bueno,

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

este servo se paro al primer vuelo en mi raptor 50 con la consecuencia que rompio el heli,hobiking no se izo cargo ,desmonte el servo i el cable del motor desoldado , mui mala calidad no lo recomiendo ,i menos en un avion o heli bueno,

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save