New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

Prop adapter to suit 4.0mm motor shaft

Prop adapter to suit 4.0mm motor shaft

Discontinued Product

Please continue searching for a similar product.
SKU:
JJ4.0
WANT FREE SHIPPING? Click here to find out more!

Prop adapter.
Prop is held with large nut, while shaft held securely in place with double hex grub screws.
Made from anodized alloy.

  • SKU JJ4.0
  • Brand -
  • Kapacita ( mAh ) -
  • Hmotnost 69.0000
  • Délka 0.00
  • Width 0.00
  • Výška 0.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Just excellent, this is much more trustworthy than the collet type ones

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just excellent, this is much more trustworthy than the collet type ones

Good quality and cheap price. The aluminum should have been a little bit harder. The shaft is easy to bend.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good quality and cheap price. The aluminum should have been a little bit harder. The shaft is easy to bend.

lo que nesecitaba era esto

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

lo que nesecitaba era esto

taylor made, just be sure of the size, it will be plug and play, amazing quality for the money.
Thanks hobbyking!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

taylor made, just be sure of the size, it will be plug and play, amazing quality for the money.
Thanks hobbyking!

These are not as pictured. I bought this because it shows a hex nut to tighten the prop on the shaft. The one I received has just the spinner with the hole through it. You cannot get these as tight as a hex nut. HK, please update the picture. Other than that, the quality is good. The threads work smoothly and fit well.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These are not as pictured. I bought this because it shows a hex nut to tighten the prop on the shaft. The one I received has just the spinner with the hole through it. You cannot get these as tight as a hex nut. HK, please update the picture. Other than that, the quality is good. The threads work smoothly and fit well.

I have received a unit with a 4.9mm diameter hole - it is not suitable for a 4.0mm shaft as published!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have received a unit with a 4.9mm diameter hole - it is not suitable for a 4.0mm shaft as published!

OTTIMO, FATTO CON METALLO ROBUSTO MA LEGGERO, LI PREFERISCO A QUELLI A MORSA IN QUANTO TI ESTRAGGONO FACILMENTE CON UNA CHIAVE ESAGONALE E NON SBLILANCIANO L'ELICA.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

OTTIMO, FATTO CON METALLO ROBUSTO MA LEGGERO, LI PREFERISCO A QUELLI A MORSA IN QUANTO TI ESTRAGGONO FACILMENTE CON UNA CHIAVE ESAGONALE E NON SBLILANCIANO L'ELICA.

Great for a 4 mm shaft . i will have to cut the hole bigger for most props like apc-e because the holes on the props are smaller that the threaded end

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great for a 4 mm shaft . i will have to cut the hole bigger for most props like apc-e because the holes on the props are smaller that the threaded end

great little thingstrong and has a grub screw to screw in to the engine

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

great little thingstrong and has a grub screw to screw in to the engine

Pesa 13 gramos. Para eje de moor de 4 mm y orificio de la hlice de 6 mm. Muy resistente.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Pesa 13 gramos. Para eje de moor de 4 mm y orificio de la hlice de 6 mm. Muy resistente.

  1. 1
  2. 2
  3. 3
  4. 4
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!