New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

HobbyKing Mig 29 - Glue-N-Go Series - Foamboard Kit

HobbyKing Mig 29 - Glue-N-Go Series - Foamboard Kit

Shipped From:
  • USA
  • Global
QTY:

Now save Uložit 0,00 € 0,00 €

21,21 €
Stav:
Skladem
SKU:
700000004-0
WANT FREE SHIPPING? Click here to find out more!

Introducing the Glue-N-Go series of foamboard kits. Easy to fly, easy to assemble, and exceptional value!

This fantastic Mig 29 is not only fast, it's a stack of fun.  Made from colorfully foamboard, it has been laser cut for precision assembly and for a great scale outline look in the air.

Supplied with carbon fiber reinforcing, metal push rods and a plastic motor mount, all it needs is some servos, a motor, esc, your receiver and a 3S pack and it will be perfect for those flying days when you just want to tear a hole in the sky. 

Specs:
Length: 950mm
Wingspan:650mm
Weight: 180g 

Requires: (Recommended)
Motor: 2208 - 2212size   2000-2600kv
ESC: 20-40A
Servos: 9g x 2
Prop: 5-6 inch
Battery: 2200mah 3S

 

  • SKU 700000004-0
  • Brand HobbyKing
  • Hmotnost 706.3200
  • Délka 950.00
  • Packaging Width 39.00
  • Výška 347.00
  • IC / 2 : Elec -
  • Motorsize ( průměr -or- cc) -
  • Rozpětí ( mm ) 650.00
  • Length(mm) -
  • SaleWeight ( g ) -
  • Kapacita ( mAh ) -
  • Mig 29 edf
  • Mig 29 edf
  • Mig 29 v2
  • Mig 29 rc
  • Mig 29 rc
  • Mig 29 rc
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Now that i have finally built this kit, i thought it'd be a good time to review.

I usually work with depron sheets so this foam board was a new challenge. It's nicely cut and all pieces fit together very well. I'm running mine on a 2200kv motor on 4s with a 5x5 prop. The plastic motor mount provided help with this setup as it grips to the foam board tightly. I've added rudders and ailerons that help a lot with acrobatic flight and flat spins etc. The only part that is a negative with this kit is the paint to control surfaces - You'll have to remove the painted areas where you tape your surfaces or they'll easily come off as the paint separates from the foam board a little too easily. Apart from that, it's a decent kit and saved me cutting out from scratch - i'm getting old i think! If you've built before, this will be a simple build. If not, some common sense and caution must be applied.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Now that i have finally built this kit, i thought it'd be a good time to review.

I usually work with depron sheets so this foam board was a new challenge. It's nicely cut and all pieces fit together very well. I'm running mine on a 2200kv motor on 4s with a 5x5 prop. The plastic motor mount provided help with this setup as it grips to the foam board tightly. I've added rudders and ailerons that help a lot with acrobatic flight and flat spins etc. The only part that is a negative with this kit is the paint to control surfaces - You'll have to remove the painted areas where you tape your surfaces or they'll easily come off as the paint separates from the foam board a little too easily. Apart from that, it's a decent kit and saved me cutting out from scratch - i'm getting old i think! If you've built before, this will be a simple build. If not, some common sense and caution must be applied.

Looks great and flies well.

The hinge cuts on the elevons were too deep and caused one of them to separate in flight. Thankfully I managed to recover the aircraft with no major damage. Reinforced the hinges with tape and it now performs as expected.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Looks great and flies well.

The hinge cuts on the elevons were too deep and caused one of them to separate in flight. Thankfully I managed to recover the aircraft with no major damage. Reinforced the hinges with tape and it now performs as expected.

I love this plane! Super durable! It has taken many rough landings. Easy to build (Gorilla Glue) It works well with a 2204 2100kv motor and a little 4 inch triple blade prop. With this little 4 inch prop, the blade tips don't extend below the body, so they cannot hit the ground. It flies with a 1000mAh to 2200mAh 3cell.
The CG needs to be a little farther forward than recommended.
Also, I gave mine a bit of a nose-job. (trimmed it back a little)
I would prefer to have pull to positive on the control surfaces, but it still works as is.
Also, this foam is amazing! I would like to buy some sheets of it!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I love this plane! Super durable! It has taken many rough landings. Easy to build (Gorilla Glue) It works well with a 2204 2100kv motor and a little 4 inch triple blade prop. With this little 4 inch prop, the blade tips don't extend below the body, so they cannot hit the ground. It flies with a 1000mAh to 2200mAh 3cell.
The CG needs to be a little farther forward than recommended.
Also, I gave mine a bit of a nose-job. (trimmed it back a little)
I would prefer to have pull to positive on the control surfaces, but it still works as is.
Also, this foam is amazing! I would like to buy some sheets of it!

This plane is fun to fly, it can fly very fast but it can fly slow as wel.
I have got a 2600kv motor in it and use a 2200 3s lipo from turnigy.
You have to use a lot of expo on it because the elevons are sensetive at speed but you need the bigger throws at low speed and landings.
I am thinking to ad a rudder funktion to it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This plane is fun to fly, it can fly very fast but it can fly slow as wel.
I have got a 2600kv motor in it and use a 2200 3s lipo from turnigy.
You have to use a lot of expo on it because the elevons are sensetive at speed but you need the bigger throws at low speed and landings.
I am thinking to ad a rudder funktion to it.

Test flight of Hobbyking Mig-29 foambard kit.

Motor - BL 2208 2150KV (From Floater Jet glider plane)
ESC - 30A
Servo - 2 x 9g
Battery - 2200mah 3s 25c
Propeller - 6x4

Verdict:

Pros
Easy to fly
It can glide
Durable
Long flying time
Nice paint

Cons
Needs higher KV motor for more speed
Needs additional aileron for the main wing to do fast rolls

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Test flight of Hobbyking Mig-29 foambard kit.

Motor - BL 2208 2150KV (From Floater Jet glider plane)
ESC - 30A
Servo - 2 x 9g
Battery - 2200mah 3s 25c
Propeller - 6x4

Verdict:

Pros
Easy to fly
It can glide
Durable
Long flying time
Nice paint

Cons
Needs higher KV motor for more speed
Needs additional aileron for the main wing to do fast rolls

Customer files
Mig 29 Cico edition Download [2]
Modifica Download [693]
Scanned Manual Download [2]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save