Add the latest night flying tech to your quadcopter with the Tri-color speed lighting system. The lighting system has tri-color LED strips that are connected to the throttle channel on your receiver via the PCB controller, as you throttle up the light intensity increases and changes color from blue to yellow and eventually brilliant red at full throttle.
The plug and play system is simple and easy to install and requires no soldering or modification
The light strips have self adhesive backing for easy mounting and are terminated with 4 pin JR style connectors. To power the lights simply connect the system to the balance lead of your battery.
• Tri-color Lighting strips that change color in line with throttle input.
• Super bright LED illumination
• Perfect for night flying and racing
• Suits all quadcopter frame sizes
• No additional soldering required
Input Voltage: 3s 11.1~12.6v
Working Current: 80mA (each)
Light Strips: 3 color (blue, yellow, red)
Light Strip Length: 100mm
PCB Size: 36 x 36mm
Hmotnost ( g )
ok muy buenass cmprenlas recomnbablesI just received this today. Overall it is pretty clean and works reliably, however I only get two colors, not the three as described. It goes right from blue to red with no yellow in the middle. I cannot say at this time whether or not it is related to my specific controller or not.The writeup for the product can probably be interpreted in several ways. What I thought I was ordering was a device where I would get 4 LED strips each containing a string of tricolour LEDS that changed colour from blue to yellow to red in accordance with throttle PWM.
What I got was a device with 3 LED strips containing LEDS that changed from blue to red with throttle PWM, no intervening colour. The fourth LED strip has the same except for 4 LEDS in the centre which change from blue to green at around mid throttle and then turn off at higher throttle PWM.