New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

Quanum Aquaholic Brushless Deep V Racing Boat 740mm (ARR)

Quanum Aquaholic Brushless Deep V Racing Boat 740mm (ARR)

Discontinued Product

Please continue searching for a similar product.
SKU:
9215000031-0
WANT FREE SHIPPING? Click here to find out more!

When it comes to brushless R/C boat action, it simply doesn't get any better than this!

The Quanum Aquaholic is the ultimate Deep V Racing Boat offering high speed, excellent handling and killer good looks. The vibrant race inspired paint scheme and expertly applied decals are sure to turn heads wherever you go!

A potent watercooled brushless power system comes pre-installed providing extreme power to the prop. The motor is an outrunner which produces massive amounts of torque. This allows the boat to get on step almost instantly upon hitting the throttle. The precision machined alloy rudder and pre-installed high torque steering servo makes for crisp steering response and keeps the boat upright during hard cornering.

The hull is constructed from lightweight yet durable ABS - this is where the Aquaholic differs from the others. The hull has a beautifully painted gloss finish just like fiberglass, yet it's offered at a much lower cost. The decals are applied before the final clear coat, sealing them from the elements and providing a top quality look.

This boat will be ready to run in about 10 minutes after opening the box thanks to the high level of pre-assembly. You will simply need to bolt on the rudder and propeller, connect the steering linkage, install your receiver and you're ready to go!

This is hands down the most fun, exciting and easy to setup brushless race boat we've ever had our hands on here at the HobbyKing office, we know you'll love it too!

Features:
• High performance watercooled brushless power system
• Vibrant race inspired paint scheme
• Lightweight ABS hull
• High torque steering servo
• 3mm direct drive flex shaft
• Powered by a 3S 2200mAh lipoly battery pack (sold separately)
• Almost Ready to Run - simply add your own radio system and battery

Specs:
Overall Length: 740mm
Hull Length: 650mm
Beam: 180mm
Weight: 1140g (w/out battery)
Motor: Watercooled 2815 brushless outrunner (included)
ESC: 50A watercooled brushless (included)
Servo: High torque standard size (included)
Hull Material: ABS

Included:
Quanum Aquaholic Brushless Deep V Racing Boat (ARR)
All necessary hardware
User manual
Spare propeller
XT60 plug
Tools

Required:
2CH transmitter and receiver
3S 2200mAh lipoly battery

  • SKU 9215000031-0
  • Brand Quanum
  • Kapacita ( mAh ) -
  • Hmotnost 2695.0000
  • Délka 740.00
  • Packaging Width 250.00
  • Výška 330.00
  • Quanum Aquaholic Brushless Deep V Racing Boat 740mm
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This is a beautiful boat! Preparation starts with removing the flexdrive. I used Molyslip grease on the drive and then replaced it. The rudder assembly is next and is easy to do.
Threadlock was used on all screws and the propeller.

The water-cooling pickup tube is near to the hub of the prop so I cut off 6mm to increase the water flow through the system.

A Turnigy 3s 2200mAh Lipo is used and after a 10 minute run is only slightly warm.

If this is to be your first fast electric boat then I would suggest that you set your throttle high end point to 75pcnt and your rudder left and right end points to 75pcntand add some exponential for good measure. This will make the boat more manageable until you get the feel of it. Later you can reset the end points back to 100pcnt and get ready to seejust how fast and quick turning she is. Wishing you lots of fun!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a beautiful boat! Preparation starts with removing the flexdrive. I used Molyslip grease on the drive and then replaced it. The rudder assembly is next and is easy to do.
Threadlock was used on all screws and the propeller.

The water-cooling pickup tube is near to the hub of the prop so I cut off 6mm to increase the water flow through the system.

A Turnigy 3s 2200mAh Lipo is used and after a 10 minute run is only slightly warm.

If this is to be your first fast electric boat then I would suggest that you set your throttle high end point to 75pcnt and your rudder left and right end points to 75pcntand add some exponential for good measure. This will make the boat more manageable until you get the feel of it. Later you can reset the end points back to 100pcnt and get ready to seejust how fast and quick turning she is. Wishing you lots of fun!

Very dissapointed in the product....it came with the motor and esc unglued,just wiggleing around the boat....horrible glue job,spent half hour only cleaning the old glue ....the esc's return water hose is just cut in half...i guess i was just expecting more from HK.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very dissapointed in the product....it came with the motor and esc unglued,just wiggleing around the boat....horrible glue job,spent half hour only cleaning the old glue ....the esc's return water hose is just cut in half...i guess i was just expecting more from HK.

Hi, I ordered this boat from Germany and it took only two days to be delivered.
Looks great!
I did some minor modifications, like i installed a BMS-620MG Servo and shortened the silicon tubes and rearranged them.
I would advice to check the screws and I used liquid thread lock from Tamiya.
Checking the cooling system, I found that there was a leak. There is a grub screw on the left side of the motor mount, again using thread lock and fixed it.
For the flex drive I use "robbe" shaft grease.

Spare props are available from e.g. Graupner, you only need a spacer (4mm to 4,75mm) and you can use them. Prop size is 40mm, pitch is 1.4.

Greetings

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hi, I ordered this boat from Germany and it took only two days to be delivered.
Looks great!
I did some minor modifications, like i installed a BMS-620MG Servo and shortened the silicon tubes and rearranged them.
I would advice to check the screws and I used liquid thread lock from Tamiya.
Checking the cooling system, I found that there was a leak. There is a grub screw on the left side of the motor mount, again using thread lock and fixed it.
For the flex drive I use "robbe" shaft grease.

Spare props are available from e.g. Graupner, you only need a spacer (4mm to 4,75mm) and you can use them. Prop size is 40mm, pitch is 1.4.

Greetings

5/5 would recommend to anyone wanting a cheap an fun boat

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

5/5 would recommend to anyone wanting a cheap an fun boat

I just bought this boat and find that they have now taken AU$ 58 off the price I paid about two weeks ago. I will not be too keen to make major purchases off HK in future!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I just bought this boat and find that they have now taken AU$ 58 off the price I paid about two weeks ago. I will not be too keen to make major purchases off HK in future!

Great first time boat. This is an awesome deal. The paint and decals will not disappoint. Very little build time. Easy to maintain. It will run on 3S or 4S, tape the hatch and i had very little water in mine.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great first time boat. This is an awesome deal. The paint and decals will not disappoint. Very little build time. Easy to maintain. It will run on 3S or 4S, tape the hatch and i had very little water in mine.

Sehr schnes Boot, ich war ber die Qualitt erstaunt! Schn kompakt, alle bis auf ein paar Kleinigkeiten eingebaut. Luft sehr schn und recht schnell! Bin begeistert!
(Fahre mit Lipo 3S 2200mAh)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Sehr schnes Boot, ich war ber die Qualitt erstaunt! Schn kompakt, alle bis auf ein paar Kleinigkeiten eingebaut. Luft sehr schn und recht schnell! Bin begeistert!
(Fahre mit Lipo 3S 2200mAh)

Sehr schnes Boot. Qualitt und Verarbeitung in Ordnung. Liegt sehr gut im Wasser und kann problemlos mit einem 4S Akku betrieben werden.

Motor-Regler Kombi gut Dimensioniert und lsst weiterhin auch Spielraum fr spteres Tuning ;)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Sehr schnes Boot. Qualitt und Verarbeitung in Ordnung. Liegt sehr gut im Wasser und kann problemlos mit einem 4S Akku betrieben werden.

Motor-Regler Kombi gut Dimensioniert und lsst weiterhin auch Spielraum fr spteres Tuning ;)

Excellent product !
Made a deap review on my blog : http:// brushlessboat blogspot fr
It's crazy fast on a 4S -2650 Mah battery : you need high discharge rate batteries otherwise the motor stops when you ask for power.
3S or 4S 2650Mah Nanotech batteries are perfect for this boat
3S = 40KM/h
4S = 55KM/h

it's pretty fine on stock setup, no need to change anything, but you need to ckeck that watercoolness system works well (don't twist or cross the water durits) before going too fast !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent product !
Made a deap review on my blog : http:// brushlessboat blogspot fr
It's crazy fast on a 4S -2650 Mah battery : you need high discharge rate batteries otherwise the motor stops when you ask for power.
3S or 4S 2650Mah Nanotech batteries are perfect for this boat
3S = 40KM/h
4S = 55KM/h

it's pretty fine on stock setup, no need to change anything, but you need to ckeck that watercoolness system works well (don't twist or cross the water durits) before going too fast !

Supper Boot. Muss zuerst fertig abgedichtet werden. Ist leider nur aus Plastik und nicht aus GFK.
Lauft mit 3S richtig schnell, und mit 4S geht richtig die Post ab. Ca 65 kmh. Fr diesen Preis bekommt man nichts besseres. wrde es mir sofort wieder kaufen.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Supper Boot. Muss zuerst fertig abgedichtet werden. Ist leider nur aus Plastik und nicht aus GFK.
Lauft mit 3S richtig schnell, und mit 4S geht richtig die Post ab. Ca 65 kmh. Fr diesen Preis bekommt man nichts besseres. wrde es mir sofort wieder kaufen.

  1. 1
  2. 2
Customer files
No File Name Download [7033]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save