The new Quanum GPS module has the powerful Ubox LEA-6H GPS receiver and incorporates the HMC5883L digital compass.
This is our best GPS module, significantly outperforming the Mediatek GPS due to the larger antenna and next-gen chipset. An excellent solution for multirotors and rovers in particular, where GPS accuracy is paramount. This new design and the included hard case with incorporated collapsible pedestal mount, provides a convenient method of mounting the compass away from sources of interference. The GPS unit features active circuitry for the ceramic patch antenna, rechargeable backup battery for hot starts, and I2C EEPROM for configuration storage. The GPS is also shipped pre-configured for use with HKPILOT, so there is no need to get the old FTDI cable out.
• Ublox LEA-6H module
• 5 Hz update rate
• 25 x 25 x 2 mm ceramic patch antenna
• Rechargeable 3V lithium backup battery
• Low noise 3.3V regulator
• I2C EEPROM for configuration storage
• Power and fix indicator LEDs
• Protective case
• ArduPilot Mega (APM) and HKPilot Mega compatible 5-pin Molex connector
Size: 27.5 x 27.5 x 7mm
Pedestal mount: 140mm tall (collapsible)
Cable length: 210mm
Weight: 38g with case
Configuration: Baud rate 38400, 5Hz
LEA-6H with compass module
*Note: Please note that this module ships with a baud rate of 38400, 5Hz
Hmotnost ( g )
I have replace my existing GPS with the Quanum LEA-6H GPS and am amazed at how much more accurate this unit is at holding position! It is well worth upgrading for the performance. Setup on my APM was no issue and I would recommend this to everyone.Great gps. Very accurate. Mast is alright but somewhat cheaply made.Very accurate and quick to find sattelites. The plastic case is quite heavy though, so if using it in an airplane I suggest removing the GPS from the plastic casing. Otherwise this is a fantastic GPS.Installed a LEA-6H purchased in July with a Mega 2.7 FC. The FC would not recognize the Compass or GPS. After some frustration I opened the LEA-6H case and found the connector block was NOT soldered to the board. So much for QC. Will attempt to solder the connector.the best GPS for now in europeGreat GPS, very fast acquisition time. Signal strengh leaves a bit to be desired but not a big deal if you are in open field. Just so happens in my backyard on a cloudy day, the HDOP hovers just around 2ish, so sometimes the APM will not let you arm. Simple plug and play with the HKPilot 2.7 running APM 3.1.5.This item was suggested when i purchased HKPIlot32, however, this item comes with 5 pin molex, not compatible with HKPilot32 6 pin molex. Wasted time and money/Mah, il case non granche... per va bene, a volte lentoFantastic item, I use it all the time in all places and electronics. Nice n shiny finish, good covering,,I put this thing on my APM 2.6 after having GPS errors leading to numerous crashes (I was using the original GPS that sold with 3DR's APM). No more GPS errors...also by relocating the compass my compassmot went from 187pcnt to 4pcnt! My Turnigy Hex is a rock solid APM flyer now.