New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

Quanum Micro AlexMos Brushless Gimbal Controller 2-Axis Kit Basecam (SimpleBGC)

Quanum Micro AlexMos Brushless Gimbal Controller 2-Axis Kit Basecam (SimpleBGC)

Discontinued Product

Please continue searching for a similar product.
SKU:
9154000013-0
WANT FREE SHIPPING? Click here to find out more!

When it comes to brushless gimbals whether you are a pro-cinematographer or a Multi-rotor hobbyist there is no question AlexMos controllers with Basecam (SimpleBGC) has Set the mark in the industry for performance, ease of use and a host of user definable options. The new micro BLG is the smallest 2-axis brushless gimbal controller on the market at the present time, and perfect for small to mid-size gimbals and even “selfie” gopro hand gimbals.

HobbyKing is Proud to offer the officially licensed Quanum Micro AlexMos BGC, powered by Basecam. This is not some cheap copy with unsupported hacked software. It was designed from the Ground up by AlexMos using quality components and a 4 layer PCB design (unlike Clones), each pre-loaded with Alexmos boot-loader and firmware, and is fully supported and updatable via the Basecam software.  

The performance of the Quanum Micro BGC is robust enough for up to 40mm motors, using the more powerful FET drivers. The BGC is supplied with high quality silicon wire for connections to the MPU and 3axia board (optional) allowing for proper flexing during operation. The Quanum BGC is equipped with on-board USB, for an easy connection to the Basecam GUI or utilize the serial port for an optional wireless solution.

The Basecam software is a powerful tool for setup and tuning but its graphical interface makes it easy even for beginners to use. The Basecam software can configure the BGC for complete standalone operation or the popular “follow” mode for handheld gimbals...even modes that work directly with Multi-rotor controllers for hybrid control. There are too many options to list. For a full list of features check out the manual under the files tab below or check out “SimpleBGC.com”. Basecam also has a huge on-line support community full of how-to videos and forums for tuning and creative ideas.

The Quanum AlexMos BGC is an unbeatable upgrade to your existing gimbal or perfect base for your new one.

**full support for the latest 2.3 Firmware updatable from the Basecam software.

www.basecamelectronics.com

Specs:
Working voltage: 7.4V~20V (2~4S)
Current for driving gimbal motor: 1.4A (constant)  2.8A (Max)
Built-in DC-DC voltage stabilizing circuit output: 5V/500Ma
Main board size: 36.2x25.0x7.4mm
Weight of main board: 3.7g
Sensor size: 15x15x4.0mm
Weight of sensor: 0.7g
Connection way with motor: 1.25mm 3P  port or 2.54mm 3P soldering pad.

Included:
2 axis Micro Quanum BGC
MPU6050
Highly flexible silicon IMU cable 
Silicon connecton Wires 

**The price included a royalty fee for AlexMos software, the Boot loader is licensed

  • SKU 9154000013-0
  • Brand Quanum
  • Kapacita ( mAh ) -
  • Hmotnost 180.0000
  • Délka 120.00
  • Packaging Width 5.00
  • Výška 80.00
  • Quanum AlexMos Brushless Gimbal Controller
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

It was formy friend... He enjoyed so much

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It was formy friend... He enjoyed so much

Great little controller.

It got shipped with the 8bit 2.4b7 software, this gave me some problems with the roll axis when performing a yaw action on the quad.
however downgrading it to 2.4b6 resolved this issue giving me a buttery smooth gimbal.
The price is somewhat high but after burning out 2 cheap ebay controllers the choice was a nobrainer.
Also take into account you have to set this thing up right, do the complete 6 step calibration and you will have some great quality on your hands.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great little controller.

It got shipped with the 8bit 2.4b7 software, this gave me some problems with the roll axis when performing a yaw action on the quad.
however downgrading it to 2.4b6 resolved this issue giving me a buttery smooth gimbal.
The price is somewhat high but after burning out 2 cheap ebay controllers the choice was a nobrainer.
Also take into account you have to set this thing up right, do the complete 6 step calibration and you will have some great quality on your hands.

Customer files
Quanum Micro BGC V3 1 2-axis gimble cont Download [1966]
Quanum Micro BGC V3 1 2-axis gimble cont Download [1966]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save