Quanum Outlaw 270 Carbon Fiber Quadcopter Racer Set (ARF)
Looking for a duable Carbon Fiber quadcopter that doesn’t need building? Then the Quanum Outlaw 270 is the quadcopter for you. This is a ARF kit so all you need to add is a receiver and battery.
The quadcopter comes packed full of features with all the great pro level gear already installed. This includes powerful Multistar 2206 2150Kv motors, responsive 20A Afro Race Spec ESC, 6" propellers and CC3D flight controller. The Power Distribution Board comes fitted with an XT60 connector and a BEC with a on/off switch for your already installed LED strips.
The bottom frame is a strong and durable, one piece, 3mm Carbon Fiber section and comes with an added aluminum exoskeleton for extra strength. The exoskeleton can be removed if required to save weight. The top frame is a one piece 1.5mm Carbon Fiber section. Another excellent feature is the Carbon Fiber lean back front camera mount (the angle of the mount can change) for aggressive flying angle.
The Outlaw 270 is supplied complete with a full set of props, CW & CCW prop adapters and all fixtures and fittings. This is a great pro level kit, all built and ready to take to the air.
• One piece Carbon Fiber Bottom Frame (3mm)
• Aluminum Exoskeleton for extra rigidity
• One piece Carbon Fiber Top Frame (1.5m)
• Lean back Carbon Fiber front camera mount
• 20A Afro race spec speed controllers
• Powerful Multistar 2150Kv motors
• Can use 6" 6030 propellers
• PDB and BEC with on/off switch for LED Strips
Motor: Multistar 2206 2150Kv
ESC: 20A Afro Race Spec
Flight Controller: CC3D
Size: 305x305x58mm (without legs)
Dry weight: 435g
1 x Quanum Outlaw 270 Racer
2 x CW 6" 6030 propellers
2 x CCW 6" 6030 propellers
1 x Receiver data cable
1 x Battery strap
1 X CC3D Flight controller
4 X Multistar 2206 Motors with CW & CCW hubs
1 x Manual
5~6ch control radio and receiver
1300~2200 3~4s battery
FPV gear optional
*For Flight controller updates please visit http://www.librepilot.org
Hmotnost ( g )
Being able to set 800 acro on cc3d on pitch/roll and 360 rate on yaw. Stock PIDs and Thrust PID Scaling set to on and being stable is like, amazing. Just solder on VTX and TX. Glue the camera to the front plate. Install the receiver to the top of the CC3D mounted. Glue down velcro on the battery and the quad. Put the strap on and go fly.
Their CC3D mount was spot on perfect. Doing multiple flips and rolls so easy.Quanum 270 stock on 1.4mah 4S multistar green 65c
800 acro pitch/roll, 360 rate yaw, stock everything and Thrust PID Scaling stock and enabled
Honestly one of the best things i've ever purchased from hobbyking. The Outlaw is my first real multi-rotor (not a plastic toy) and it definitely has endured a lot of punishment while I learned. I've slammed it into grass and gravel probably 50 times, often at high speed, and thanks to the exoskeleton the only casualties have been props and a couple of old lipo batteries that took a rough landing.
Since then I've come to love the speed and power of this quad, it really is a beast and can do everything I dreamed of when i purchased it. Programming the flight behaviour with open-pilot was easy even for a beginner, and now that I no longer find myself crashing, I even have the option to further reduce the weight by taking off the exoskeleton.
This multi-rotor has been the perfect, low stress, no worries experience I needed in-between all my planes related problems.
10/10 really do recommend this product very highly for a pilot of virtually any skill level.Good racing quad out of the boxAS complete easy set up well built a machine I have seen to date.cc3d simple to set up. Camera is tight and transmitter are a bit tight. Remove controller cover, stack the power board, all the room you need. The beat product I have ever bought from HK.Worth every penny. I will buy another.
Thanks HKImpressive Quad ! Been through 20 or so packs and have only broken 4 props ! This quad is tough ! Just ordered a second one just incase I break this one won't have to wait to fly.
Lots of power with great smooth running motors.