Introducing the all new Quanum Q-2D brushless camera gimbal, which is designed for use with the GoPro Hero 3 on 350 size quadcopters such as the Quanum Nova, QR X350 PRO and DJI Phantom.
When it comes to a great aerial video platform a few things are key; design, size, weight and performance. The Q-2D is a design that has been optimized from the start for proper integration, saving on size and weight and the pre-tuned controller performs just as you would expect from Quanum.
The Q-2D is one of the smallest and lightest brushless gimbals on the market. At just 84mm tall, it can clear most multi-rotor landing skids and only weighs 120g, perfect for 350 sized quad copters. Both pitch and roll can be adjusted on the fly from an R/C channel and has a huge operating voltage range of up to 28 volts.
The Q-2D is pre-tuned from the factory, requiring no setup, simply bolt on to the bottom of the Quanum Nova, QR X350 PRO or DJI Phantom, install your GoPro Hero 3 camera and you're ready to shoot professional stabilized aerial video!
• Lightweight yet duable aluminum construction
• Compact size
• Adaptable to most 350 quadcopters (direct fit for Nova, QR X350 PRO and DJI Phantom)
• Pitch and roll inputs
• Support for the GoPro Hero 3 video aux output
• Huge input voltage support (7.4~28V)
• Power supply voltage reverse connection protection and voltage compensation
• Motor drive side short circuit protection
• Initial pitch angle
• Sensitivity parameters adjustment
Operating voltage: 7.4V~28V DC (recommended 12V, 3S lipo battery)
Work current: 200mA~500mA
Working environment temperature: -15~65C
Sensors: Three MEMS gyroscope rotor and rotor MEMS accelerometer
Maximum angular rate: 2000 deg/SEC
Maximum acceleration: 16g
Control frequency: 1000Hz
Motor drive frequency: 32kHZ (noiseless smooth drive)
Accuracy: 0.1 deg
Control Range: - 45~45 (Roll), - 135~90 (Pitch)
Applicable filming equipment: GoPro Hero 3 or iLook
Mounting: Upper plate adapter holes centerline 30~40mm hole to hole
1 x Quanum Q-2D Brushless Gimbal
2 x Servo leads for pitch and roll control
1 x Balance accessory for use with heavier cameras (not required for use with GoPro Hero 3)
1 x Power adapter to mini JST
*Note: User manual available for download located under the "Files" tab below.
Hmotnost ( g )
My Turnigy 2K Cam (SJ4000plus) is a bit heavy for that gimbal so i removed the battery and now it works much better.All I have is problems with this Gimbal when I am flying with it it keeps on tilting to one side and I am using a GoPro 3 I have taken the weight off it doesn't make a differencenice and light. made very well and is nice and smooth. put the turnigy action cam into the holder with the screw from below cant wait to get my quad ordered this after my nova and got this way ahead of the quad probably customs. it'll get hereMuito bom para o preo, mas isso mesmo, pelo preo. A qualidade e resistncia dos motores deixa muito a desejar. Nas manobras mais rpidas no conseguem estabilizar a cmara.Amazing... Have tried 2 other well known brands but none were as good in the same price range.
Easy to setup for basic use (no need to adjust gains for a gopro). I have modified the front part of my GoPro water prof case and have put it in front of my GoPro, Added a little weight behid to have it balanced balanced and with this little extra weight gimbal is still working at PERFECTLLY and my gopro hero4 is very well protected. I'm using it on a 600 size homemade quadcopter.lol somebody just delete my "not satisfy Hobbyking's" review. Are you kidding me? I had a better mind of you...
Good gimbal, easy to setup and does the job great.
Not too heavy.Very high quality build and works perfect using a GoPro Hero 4For the price this is a very nice gimball. It works nicely and it does what it needs to do, stabilize the image when filming from my quanum nova. It was easy to set up I just needed a connection cable to connect the female JST connector to my 12V outlet on my nova and that was it. I can controll the tilt of the camera from my nova TX. For me very good value for the price.Do not connect the battery reversed or you will fry it in a nano second. Otherwise great gimbal.