This LED strip contains 3 RGB (Red,Green, Blue) LEDs in every 50mm section.
The LED strip may be cut to fit into installations if necessary. Cutting marks are printed on the strip and must be adhered to. The smallest workable segment of the single color strip is 50mm long and contains 3 top Surface Mount LEDs.
During soldering, do not exceed a maximum soldering temperature of 260 Celsius degrees and the soldering time of 10 seconds. Solder connection should only be performed on designated solder pads on the strip.
There is a double-sided adhesive tape attached to the back of the strips. Care must be taken to provide a clean and dry mounting surface when mounting the strips.
This strip is not waterproof.
• Supplied with 4 terminal plug for easy connection to RGB LED driver allowing for multiple effects, colors, brightness and speed (sold separately)
• 1 meter long strip of RGB LEDs
• UL, CE and RoHS compliant
Max Operating Voltage: 12V
Max Power Consumption: 14.4W / 1.2A (per meter)
Beam Angle: 120°
Service Life: 50,000 hours
Strip Length: 1 meter
12V power source
Optional RGB LED driver for special effects (sold separately, see "Accessories" tab below)
Hmotnost ( g )
These multi-colour led systems are the best for manual control of the desired color and flash pattern. They would be better if the pattern could be controlled using a TX switch also.Sehr schne und satte Farben. Besonders das Pinkt ist neu und gefllt mir auch gut in kombination. 5Sterne verdient fr den Preis.nice product and very useful from hobbyking, and very bright