New price, now only $74.99!!!
Taking 3 years of continuous development and testing, the Robird G31 flybarless system is now available and has been released to the market for 2012. Incorporating a high precision digital 3-axis MEMs gyro along with their own control algorithm, the G31 is a state-of-the-art controller for FBL helis ranging in size from 250 to 700. Programming the G31 can be done using transmitter stick inputs or via USB with Robird's free programming software.
The G31 supports Spektrum/JR DSM2/DSMX/DSMJ satellites and Futaba S.BUS allowing it to be used as a receiver/FBL controller combination. This means that you can eliminate the need for using a separate receiver by simply connecting a satellite directly to the G31!
You simply will not find a better deal for a precision flybarless system on the market today. The G31 offers the same features and performance normally only found on $200+ big name units, and all of this at a fraction of the price!
• HV Compatible (5V/6V/7.2V/8.4V)
• High Resolution with Digital Output
• Integrated 16bit ADC (0.092dps/digit)
• High Vibration Tolerance
• High Speed Pirouette Capability (+-2000deg°/sec measurement range)
• Separate Power Bus for Cyclic and Tail Servo
• Digital Cyclic Ring Adjustments
• Supports all PWM External Receivers / S.BUS & Satellite Receivers for JR & Spektrum (DSM2, DSMJ, DSMX…etc)
• Supports Multiple Swashplate Configurations and Multi-Blade Rotor Heads
• Servo Centering (Neutral)
• Cyclic and Pitch Geometry
• Swash Servo Limits
• Tail & Cyclic Limits
• Main Rotor Vibration Analysis
• Tail Rotor Vibration Analysis
• Governor Feature Available with Free Firmware Upgrade
Weight : 11g
Dimensions : 34 x 25 x 13.7mm
SRX Cables x 1
S.BUS Extension x 1
Link Cables x 3
Signal Splitter Cable x 1
USB Cable x 1
Mounting Tape x 1
Blank Plug x 1
*Note: Robird G31 software can be downloaded for free at http://www.robird.net/G31/
Hmotnost ( g )
This great little unit is so easy to setup, and out performs the 3GX unit i had before on my 450 pro...I would have no issues putting it on any of my models ... large or small...The only problem is stock...Come on guys...the demand is there....let see the supply !!very good flybarless system
the picture a little miss leading, should change it .
there is not free shipping so please do not put the free shipping there.I have two of these units installed on my 500 dfc and a new 700 pro dfc and i have to say there as good as a vbarr
once locked in they piro like a dream even inverted it just sits there on the spot spinning
very much worth the extra cash over anything else and dont be worried about how cheap it is ether compared the ICon,sk,gx,ect it really stacks up and is so simple to setup ,could be done in 5mins after one or two goes at it :)
10 Crowns....... lolThis fbls system is amazing. It was imediatly recognized by my pc and took me step by step to set it up. It comes with everything it is sposed to, and has all the working options that all reviews were bragging about. My maiden flight was flawless and I am blown away how tight it flys. I did notice that the setup program is a little bit different that the youtube version, but just follow it through. Its all there. I have over 20 flights on it now and it hasnt missed a beat.Great product. The setting up of the software is very easy. The 3 axis gyro is amazing! You can setup your heli in minutes and it's RTF!
Indeed, this Robird G31 beats the Beast!Das G31 funktioniert tadellos, der Drehzahlsensor funktioniert bestens.
Mit meinem Futaba Empfnger wollte das System nur S-Bus 2 akzeptieren (R7008SB-T. Nach diesen Anfangsproblemen ist das Programieren mit der Software ein Kinderspiel. Durch den Einsatz eines S-Bus Empfnger, knnen die Kreiselwirkung fr Nick und Roll, mit einem Drehregler, im Flug schnell eingestellt werden. In der Sofware kann man die Agilitt vorwhlen. Fr den ersten Flug war die Sport 3 D einstellung richtig gut. Nach dem dritten Akku wurde die Agilitt hher gestellt, bis der Heli gut an den Knppeln hing. Das Heck stand beim ersten Flug so gut, dass ich nur die Expo Einstellung runter nahm. Der T-Rex 550 ist mit dem Robird G31 top ausgestattet. Kein driften und weiter / wegdrehen des Hecks whrend der 3D Figuren. Jedoch sollte die Software und Anleitung in Deutsch bersetzt werden.
Nach 8 Flgen muss ich zugeben, dass dieser Gyro in den Foren fr positive Diskusionen sorgen wird.WORK WELL, EASY TO SETUP, LOW PRICE, VERY STABLE LIKE A BEAST Xgreat system for flybarless helicopters. I use it in my HK500 and it works well. Easy to setup, the first flight was great. I have made three or four flights until now and i am very happy with the G31.super device for the price
easy to adjust (with some help on the youtube platform by http://www.youtube.com/watch?v=-PaddpmSCbk&feature=player_embedded
from 1 to 18 lesson how to do (hold software version but no big differences with the actual one)
to adjust without PC connected search for manual
accurate enough for my flying style
LIKE it a lot :) Fly's in a 250 heli. The Sbus/spektrum adapter is a little odd.
G31_SetupWithTX download now [613kb] G31_SetupWithTX download now [613kb] G31_SetupWithTX download now [613kb] Robird G31 FBL 0.96a firmware download now [628kb] G31 manual 0.98D download now [8762kb] Robird 31 Introduction download now [1098kb] Manual download now [628kb]