New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

RotorStar Brushless Outrunner Helicopter - 4956-800kv (600/.50 size heli)

RotorStar Brushless Outrunner Helicopter - 4956-800kv (600/.50 size heli)

Discontinued Product

Please continue searching for a similar product.
SKU:
9192000144-0
WANT FREE SHIPPING? Click here to find out more!

RotorStar Series brushless motors offer the absolute best quality, performance and value for your high performance helicopter model. Each and every RotorStar motor is thoroughly inspected and tested to ensure the high efficiency and top performance required for meeting the demands of 3D helicopter pilots.
 
RotorStar Series motors are top quality brushless outrunners designed specifically for use in todays high performance helicopter models.
 
We instructed the engineers to source the best quality magnets, bearings and materials available to them and develop a motor that would not only rival, but surpass the quality of many leading motor manufacturers on the market today.
 
The result is an efficient, high caliber motor using quality double shielded bearings, sintered Neodymium magnets and a string wound stator ensuring an accurate and consistent winding each and every time.
 
The RotorStar motors are suited to modelers who are seeking a top quality brushless helicopter motor without compromise.
 

*Perfect for Trex 600/HK600/Raptor 50/Gaui X6/Logo 500 or any other 600/.50 size helicopter.
 

Specs:
Turns: 10T
Voltage: 6S~10S Lipoly
RPM/V: 800kv
Motor Poles: 8
Internal resistance: 0.0145 Ohm
Max Loading: 100A
Max Power: 3700W
Shaft Diameter: 6mm
Shaft Length: 21mm
Screw Mounting Spacing: 25mm/30mm (M4)
Weight: 375g
Motor Plug: 4mm Bullet Connector

  • SKU 9192000144-0
  • Brand -
  • Hmotnost 540.0000
  • Délka 130.00
  • Packaging Width 60.00
  • Výška 90.00
  • Kv (rpm / v) 800.00
  • Maximální proudy (A) 100.00
  • Odpor ( mh) 0.00
  • Maximální napětí ( V) 37.00
  • Výkon ( W ) 3700.00
  • Hřídel A ( mm ) 6.00
  • Délka B ( mm ) 56.00
  • Průměr C ( mm ) 49.00
  • Může Délka D ( mm ) 44.00
  • Celková délka E ( mm ) 78.00
  • RotorStar Brushless Outrunner Helicopter - 4956-800kv
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Well , I changed the Setup for my T rex 600 CF from 6S to 8S. By the way for almost 6 years I was useing the TURNIGY T 600 1100Kv Motor in this Heli (on 6 S) and never had an issue.No need to change Bearings or shaft.Just a Great Powerfull Motor. So now I was looking for a Motor who can handle the 8S (the T 600 only manages 6S). My first choice was to buy a XNOVA with 830kv for the price of about 200.- U$.But then I discovered the new TURNIGY Rotorstar series and the specific setup of this Rotorstar is almost the same as the XNOVA.So why spend so much Money more when I had so good experience with the TURNIGY?! When the Motor arrived and I took it out of the Box, I already could see that this is a high quality product. Smooth running , super precise winding.
So , now I'm just back from the first test with 4 flight's in a row. And I only can recomend this Motor for 3D Pilot's. Lot's of Power ,perfect running and after 5 Min. flight (3D) only handwarm. Absoulutely Great . The more expensive Motors with the Big Names can't do better than this one either. Just loving it!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Well , I changed the Setup for my T rex 600 CF from 6S to 8S. By the way for almost 6 years I was useing the TURNIGY T 600 1100Kv Motor in this Heli (on 6 S) and never had an issue.No need to change Bearings or shaft.Just a Great Powerfull Motor. So now I was looking for a Motor who can handle the 8S (the T 600 only manages 6S). My first choice was to buy a XNOVA with 830kv for the price of about 200.- U$.But then I discovered the new TURNIGY Rotorstar series and the specific setup of this Rotorstar is almost the same as the XNOVA.So why spend so much Money more when I had so good experience with the TURNIGY?! When the Motor arrived and I took it out of the Box, I already could see that this is a high quality product. Smooth running , super precise winding.
So , now I'm just back from the first test with 4 flight's in a row. And I only can recomend this Motor for 3D Pilot's. Lot's of Power ,perfect running and after 5 Min. flight (3D) only handwarm. Absoulutely Great . The more expensive Motors with the Big Names can't do better than this one either. Just loving it!!!

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save