New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

RotorStar RS-1253MG Digital Helicopter Cyclic Servo 29g / 4.8kg / 0.09sec

RotorStar RS-1253MG Digital Helicopter Cyclic Servo 29g / 4.8kg / 0.09sec

Discontinued Product

Please continue searching for a similar product.
SKU:
9068000005-0
WANT FREE SHIPPING? Click here to find out more!

If you're looking for a high performance cyclic servo with quality to match for your 500 size heli, we have just the thing!

The RotorStar RS-1253MG is a park size digital servo featuring an alloy heatsinked case, full metal geartrain, coreless motor and a fast 0.09sec transit time. Add to that its excellent performance and tricked out looks, and you have one outstanding servo for the price!

Perfect for the HK500, Trex 500 and many other 500 size helis on the market today.

Specs:
Model: RS-1253MG
Operating Voltage: 4.8V / 6.0V
Operating speed: 0.10 sec.60° / 0.09 sec.60°
Stall Torque: 4.2kg.cm / 4.8kg.cm
Size: 35x15.1x29.5mm
Weight: 29g
Motor: Coreless Type
Ball Bearing: Yes
Gear: Metal Gears
Connector wire: 250mm
Plug: JR

  • SKU 9068000005-0
  • Brand -
  • Hmotnost 123.0000
  • Délka 110.00
  • Packaging Width 30.00
  • Výška 75.00
  • Točivý moment ( kg) (min . 0,01 kg ) 4.80
  • Rychlost ( Sec / 60deg ) 0.09
  • A ( mm ) 34.00
  • B ( mm ) 35.00
  • C ( mm ) 30.00
  • D ( mm ) 15.00
  • E ( mm ) 48.00
  • F ( mm ) 20.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

have to trie them first before review, looks nice packed

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

have to trie them first before review, looks nice packed

I use tis servo for a 500 size hely. Fast enough for my need. Good price!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use tis servo for a 500 size hely. Fast enough for my need. Good price!

Hi , i use this in my SebArt Mythos-70e two in the stab and 2 in the aileron , centering well for precission flying ,speed is fast enough ..price is right too ..!!
earlir i have the Aligh 515 , same spec with this rotor servo but the speed is more faster and respon is better than Aligh servo !! Overal is a good buy , i recommand buying this ..!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hi , i use this in my SebArt Mythos-70e two in the stab and 2 in the aileron , centering well for precission flying ,speed is fast enough ..price is right too ..!!
earlir i have the Aligh 515 , same spec with this rotor servo but the speed is more faster and respon is better than Aligh servo !! Overal is a good buy , i recommand buying this ..!

These are really good servos. I use them on my mostly alignized FL HK 500. At first I noticed there was a bit of overshoot, and then I noticed it wasn't because of the servos, it was because the tail boom of the helicopter twisting around towards the ground. When the helicopter is set up properly, these servos work fantastic for hard 3d at 2650 RPM. 4 stars on value, because I cannot find replacement gears for these servos. Once you strip a gear, you have to buy a new servo. All I can find is that these servos are probably made by Savox, and they do not sell these servos, or any version of this servo, which means we're not likely to see replacement gears any time soon.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These are really good servos. I use them on my mostly alignized FL HK 500. At first I noticed there was a bit of overshoot, and then I noticed it wasn't because of the servos, it was because the tail boom of the helicopter twisting around towards the ground. When the helicopter is set up properly, these servos work fantastic for hard 3d at 2650 RPM. 4 stars on value, because I cannot find replacement gears for these servos. Once you strip a gear, you have to buy a new servo. All I can find is that these servos are probably made by Savox, and they do not sell these servos, or any version of this servo, which means we're not likely to see replacement gears any time soon.

Good quality and reasonable price!!!!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good quality and reasonable price!!!!!!

I am using these as cyclic servos in an Align T-Rex 500 ESP converted to flybarless with an Align 3gx (and also converted to belt drive). These are replacing the original Align DS510s that came with the kit which were pretty mangled due to a really bad crash.

Two of the three Rotorstar servos had zero slop, but one had a little give. They all centered well and move at the same speed. There is no hunting in any of the servos. The gears are all metal. They are at least as precise as the DS510s and the splines are compatible with the DS510s servo arms. I have had 4 flights so far and the servos have given me no trouble and are more than fast and strong enough for sport flying/ light 3d. Overall I am happy with the purchase so far. The only reason I am giving an overall rating of 4 stars is due to the slight slop in one of the servos.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I am using these as cyclic servos in an Align T-Rex 500 ESP converted to flybarless with an Align 3gx (and also converted to belt drive). These are replacing the original Align DS510s that came with the kit which were pretty mangled due to a really bad crash.

Two of the three Rotorstar servos had zero slop, but one had a little give. They all centered well and move at the same speed. There is no hunting in any of the servos. The gears are all metal. They are at least as precise as the DS510s and the splines are compatible with the DS510s servo arms. I have had 4 flights so far and the servos have given me no trouble and are more than fast and strong enough for sport flying/ light 3d. Overall I am happy with the purchase so far. The only reason I am giving an overall rating of 4 stars is due to the slight slop in one of the servos.

Worked just fine out of the tin case. Specs for size and weight are correct. Takes 25 tooth servo horn (futaba servo saver fit on perfect) and has a 26cm servo lead. Very quiet running with both servo tester and radio bench test (at all frame rates). No gear train slop at all. Going to use as a 1/12 scale steering servo. Now to figure out what to use the cool tin case for...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Worked just fine out of the tin case. Specs for size and weight are correct. Takes 25 tooth servo horn (futaba servo saver fit on perfect) and has a 26cm servo lead. Very quiet running with both servo tester and radio bench test (at all frame rates). No gear train slop at all. Going to use as a 1/12 scale steering servo. Now to figure out what to use the cool tin case for...

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save