RS610 is a 6-channel, full-range and ultra narrowband receiver. When you install it in an electronic 3D helicopter, the mini size will let you connect the plugs of 6 servos / ESCs more easily. 3D helicopter and 3D fix-wing plane have strict demand of the reliability and response speed of the receiver. The decoder, which uses DSP, can guarantee enough response speed, and reject glitch effectively. The full-range and narrowband guarantee the reliability of the receiver. It makes sure that your plane is under good control all the time in a busy flight field with numerous transmitters. Because of its small size, RS610 can be put into a small and exquisite external dimension, micro indoor electronic planes, park aircrafts, 3D helicopters and 3D fix-wing planes. The full-range and narrowband capacities enables it control the gliders and glow planes easily.
See the RS 610 User Guide for more details.
Size 1.3”x0.75”x0.32”(33x18.9x8.2mm) Weight 0.25oz/7.2g (with shrink wrap) Sensitivity about 2.0ìV Selectivity ±8kHz at 65dB down Number of channels 1-6 Filtering Dual turned RF circuitry Filtering Dual 4 element ceramic filter Filtering DSP filtering in MCU with mild algorithm Shift polarity Positive or negative (auto-detect) Case Shrink wrap Operating Voltage 4.8V~6.0VDC Operating Current 11mA Modulate FM/PPM(pulse position modulation)
Hmotnost ( g )
This is really a superb receiver.....it has everything a good receiver needs: small, light, affordable an no glitches at all, you could use these receivers on all your models !Very fine receiver.
Great range, no glitches.
Works perfect with GWS cristals, too.
(Difficult to get Corona Crystals)
ManfredExcellent receiver, small and very light. Ideal for small modelsGreat price!! Full Range, no glitch & small. It can go far with my slow fly stick.I'm using it on depron slow flyer. 100%reliable. For that price I'll buy some more.Tiny little rx with full range at an unbelievable price bought 2 of them and used them on my depron park flyers with excellent results thanks UHGreat range. I had my 1.5m glider in a thermal to the point I was losing sight of it. Control was fine throughout - and I got it down again! Am ordering a couple more.First I bought 4ch. version and I was so impressed, so I bought this one.
Great little receiver! It is really small and the quality is good. I did a ground check:no glitches, when reached the limit (63m)with non extended antenna, the movement become slower and when it was out of range it stayed quiet (no glitching). I used a Corona crystal. I used this receiver in Brio 10 and now is going in F5J glider.
Great value for the money.Super receiver! Full range, no glitches so far and it is really light and small... it will fit in almost any, even tiniest fuselage. I will buy more... when it gets on stock -)Another nice tiny receiver.Im using on an easyglider at slope no glitches at all.