The RX461 (92010) 4-Channel 2.4GHz FHSS-4T Surface Receiver is a Super Response, Telemetry-capable receiver that is used with the Sanwa/Airtronics MT-4 2.4GHz FHSS-4T transmitter. This receiver supports Airtronics Telemetry and features an extremely low latency time and high frame rate, which makes you feel more connected to your model than ever. This receiver works equally well in cars, trucks and boats.
When used with the Sanwa/Airtronics MT-4 4-Channel 2.4GHz FHSS-4T transmitter and the Airtronics Temperature and RPM/Speed sensors (available separately), real-time telemetry is now an option.
*This receiver is currently compatible with ONLY the MT-4 4-Channel 2.4GHz FHSS-4T transmitter.
*All Sanwa/Airtronics 2.4GHz FHSS-4T surface receivers now have a Nominal Input Voltage rating of 4.8v ~ 7.4v.
• One-Touch Binding
• Single Receiver Antenna
• Compatible with Sanwa/Airtronics 2.4GHz FHSS-4T Capable Surface Transmitters (MT-4)
• High Frame Rate, Low Latency FHSS-4T Technology
• Servo Mode Selectable (Normal, SHR and SSR)
• Nominal Input Voltage Up to 7.4v Allows Use of 7.4 Volt Servos
Frequency/Modulation Type: 2.4GHz/FHSS-3
Nominal Input Voltage: 4.8v ~ 7.4v
Dimensions: 36.2 x 26.5 x 16.3mm
Fail Safe: Yes (Programmable on All Channels)
Receiver Battery Fail Safe: Yes (3.8v Default / 3.5v ~ 5.0v Adjustable)
Connector Type: Universal 'Z'
*This receiver has a Nominal Input Voltage rating of 4.8v ~ 7.4v, therefore, it can be powered using a 4 Cell to 6 Cell Ni-Cd or Ni-MH battery pack, or a 2S Li-Po or 2S A123/Li-Fe battery pack. DO NOT USE A 3S Li-Po BATTERY PACK!
*When using a 2S Li-Po battery pack you should NOT use servos rated for 4.8 or 6.0 volts, otherwise damage to your servos could occur. In this case, use high voltage 7.4 volt servos.
*You can use Analog or Digital servos with this receiver. For the best results, we recommend using Digital servos.
Hmotnost ( g )
Bought 2 years ago with MT-4, and now receiver for additon car. Perfect fit in most chassis. Although there are smaller ones, like RX-471, due to telemetry capability it is good value for the money. Spare case and spare aerial cable is a plus (not included), this is why you can not find these cheaper - even used - as new @Hobbyking, you can renew it several times as long as PCB not damaged. Never had an issue with coherence, or noise from others on the track. SSR for Sanwa servos, for ultimate speed. Only take care, that you cut off the small "ear" from Futaba type plugs. Plugs fit a little tight, but it also means they'll never get loose... :-)