Registrovat

Product Finder

Nastavení

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registrovat

SCM 3223 1550kv Brushless Outrunner

SCM 3223 1550kv Brushless Outrunner

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Váha:
125 g
SKU:
SCM3223-1550
Popis
produktu

Spec.
Battery: 2-3 Lipoly
Kv: 1550rpm/v
Max Eff: 80%
Max Current: 6 to 16A (over 73% efficiency)
Int. Resistance: 70mohm
10v no Load current: .95A
Dimensions: 27.7 x 30mm
Shaft: 3mm
Weight: 57g
Model Size: up to 700g
Recommended Prop: 9x5

Product
Specifications

Další informace

  • SKU:
    SCM3223-1550
  • Brand:
    nedefinováno
  • Hmotnost ( g )
    125.00
  • Délka
    90.00
  • Width:
    29.00
  • Výška:
    80.00
  • Kv (rpm / v)
    1550.00
  • Maximální proudy (A)
    16.00
  • Výkon ( W ):
    0.00
  • Délka B ( mm ):
    25.00
  • Může Délka D ( mm )
    13.00
  • Maximální napětí ( V)
    11.00
  • Hřídel A ( mm ):
    3.00
  • Unit Weight (g):
    57
  • Průměr C ( mm )
    28.00
  • Celková délka E ( mm )
    38.00
  • Odpor ( mh):
    70.00
Community
Discussions
Rate&
Review

Napište vlastní recenzi

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
this motor is excellent.. 900gr trust = 9x4.7sf prop 40a esc 3s 2200mAh 35c lipo. i use it on my 100cm zagi :)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I use 2 of these tiny motors on my Twinstar 2

Its plenty of power with a 8x4.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I tried this motor on 3S with different props:
Graupner SF 6.7x3.5 - 17 Ampere.
TGY SF 8x3.8 - 25 Ampere. The motor got burned after 30 seconds! So do not go bigger than 7 inches with this motor. Otherwise try the 1200kv version of this motor.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is one of the most fantastic motors for its size. Using a 8040 gws prop, this little motor has a great speed range. At present we are doing combat with 610 2 cell rhino lipo,s pushing a 18X18 blue foam, flat plane with ailerons elevator and rudder. plush 6 and 8 amp controller. Auw is approx 6 to 10 oz. More powerful than a 2204-14 or 3020. Its more durable and wires comming from motor are thicker and easy to solder. Thumbs up on this
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
APCe 6x4 494g 12.18V 11.1A 136W

APCe 6x5.5 480g 11.95V 13.9A 166W

APCe 7x5 682g 11.79V 20.7A 244W



Bell slightly out of true



Tested 4 May 2009
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
i tried this motor with a 7x6 apc propeller and a 25a speed controller, i got 140w power. it's a medium quality motor and is a little bit expensive related to the same class motors
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I use the Motor with a Graupner Slow Fly Prop 8x4,5

2 Lipo: 7000 rpm 8,3A

3 Lipo: 8500 rpm 15 A



Dont use the Prop mount with 3 Lipos, the rubber is not strong enough to hold the prop.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This motor is wery good for small aircombat 850mm wing span and weight 345g. Motor is very light and powerful. Prop. 8x6 GWS HD (about 13A) or 8x4 (about 10,5A) GWS HD. I use it with battery LM 1300mAh and Hextronik 18A speed controller or Ormc 18A.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Štítky produktu

Štítky oddělujte mezerou. Víceslovné uzavřete v apostrofech (').