The Scorpion S-25 Series motor is designed to be the ultimate competition motor for the indoor F3P planes. This motor is designed to run on a 2-cell Li-Po battery pack, and when teamed up with a Scorpion 11 amp ESC, provides a potent power system for your indoor model. The S-25 Series motor features a Titanium Main shaft, and tips the scales at a scant 20 grams (0.69 ounces). This motor was optimized to work with props such as the GWS 8x4DD, which are so popular with the indoor fliers.
Scorpion Competition Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold anodized to provide a beautiful, long-lasting finish. The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are rated for operation at 200 degrees C (392 F), making a motor that is virtually impossible to burn up in normal use.
Stator Diameter: 25 mm (0.98 in)
Stator Thickness: 3 mm (0.12 in)
No. of Stator Arms: 12
No. of Stator Poles: 16
Motor Wind: 26 Turn Wye
Motor Wire: 5-Strand 0.21 mm
Motor Kv: 1610 KV RPM/Volt
No-Load Current (Io/10V): 0.35 Amps
Motor Resistance (RM): 0.180 Ohms
Max Continuous Current: 10 Amps
Max Continuous Power: 72 Watts
Weight: 20.0 Grams (0.71 oz)
Outside Diameter: 30.1 mm (1.18 in)
Shaft Diameter: 2.98 mm (0.12 in)
Body Length: 20.57 mm (0.81 in)
Overall Shaft Length: 25.7 mm (1.01 in)
Max Lipo Cell: 2s
Max Peak Current: 13A (10 seconds)
Max Peak Power: 94 Watts (10 seconds)
Shaft Material: Titanium
Motor Timing: 5deg
Drive Frequency: 8kHz
Hmotnost ( g )
Kv (rpm / v)
Maximální proudy (A)
Výkon ( W ):
Délka B ( mm ):
Může Délka D ( mm )
Maximální napětí ( V)
Hřídel A ( mm ):
Unit Weight (g):
Průměr C ( mm )
Celková délka E ( mm )
Odpor ( mh):
the motor is nice but i have 2 problems with it.
first problem is the prop saver.it has a cone that not work with GWS props.it does not fit.to much moving on the cone.
second problem the rubber rings are too short and i have kill oneby mounting the first prop.
Power is smov but enough for 130grams