The easiest way to put retracts in your plane. No need to install a control box, messy wiring or a complicated air system. Just screw in the retracts, connect to your Rx and youre ready!
Reliable servo mechanism with metal gearing and a high torque motor ensures trouble free flying!
Why bother with air systems when you can now have a realistic and reliable electric unit at a fraction of the price?!
3 seconds over current and jamming protection
Includes fitting to twist the strut 90 degree when retracted
Smart circuit keeps the unit retracted even if you connect the power. Only the transmitter signal can extend or retract the gear.
Working voltage: 4.8~6.0V
Working current: 0.1~0.3A (3 seconds over current protection)
Retract Loading: 60g
Wire Leg's: 3mm
Mount: 35mm x 32mm
Hole Spacing: 27.60mm x 23.10mm
Total Length: 171.36mm
Not suitable for a plane heavier than 2.5kg
Hmotnost ( g )
The internal screw can damage easily! Could have spare parts! I use in my Parkzone Spitfire IX. I have two of these with bad bolt.Installed thse on the parkzone p47. Direct fit, worked perfect, just had to slot the side of the landing gear to mate up against the grub screw. Way better value than paying 90 for the eflite set-upthis thing is bigger than I thought it would be. couldn't use it but tested and worked great.Tres pratique pour avoir un train rentrant avec une roue directrice a l'avant. Install sur un cesna citation, parfait.Works ok. It is very lightweight. I would not uses it on a heavy plane. Can only be used in a 90 degree twist configuration. The spring will hit the motor if you do not twist.Amigos de hobby king recomiendo este producto y ademas pongo cinco estrellasBe aware that these are not the normal "Change Sun V2 retracts" the ones I have just received do not have the wording "V2" on the packet like others I have purchased, they do not have METAL TRUNNIONS, they are PLASTIC, this is false advertising of a Change Sun V2 retract, shame on you HKSuper Einziehfahrwerk, hab dieses als Spronrad in der Durafly Mustang P51 verwendet.Great value.They worked as they should no problems. The nose was assembled wrong but easy fix. You need to disassemble the nose retract and make a flat spot so the steering horn can hold properly.Make sure to open the "files" tab to get the directions. All and all for the money A .